I have a Prolink H9601 adsl-usb modem that has drivers for linux but are for kernel ver 2.6.10 so can anybody tell how to modify those to work with new kernel in ubuntu jaunty? Drivers are n[URL]
View 4 RepliesI need to make a minor change to one of the drivers in my 2.6.38 (-sid) kernel. However, I am wondering how best to go about it. Many of the guides on the internet presume one will be using a vanilla source tree and plan on manual configuration.
I am looking for the easiest means of accomplishing a simple recompilation of what I currently have -- with the same configuration and everything else. On Gentoo I usually just do a zcat /proc/config.gz > .config
However am unsure if this is the, correct, Debian way of doing things.
I am running kernel 2.6.32-23-generic-pae and since updating nvidia drivers do not work. I go into hardware drivers and activate but I get dropping to low resolution desktop or VGA not supported.
View 2 Replies View RelatedI was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
when I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.
View 1 Replies View RelatedI wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies View RelatedMy laptop has only 2GB of RAM so I don't think I need the PAE kernel, also there are some drivers that I want to install, they were built for non-PAE kernel.
So far I read that I have to change the :
/etc/sysconfig/kernel
---------
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes
[Code]....
there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View RelatedWith the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.
I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.
So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.
I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.
I'm fairly new to linux Red Hat. We are running Rhel 3 on our VM's. We ran into a issue, (Bug 121801 - athlon-smp kernel does not support >4GB of RAM. what the stepos are to upgrade the existing kernel to the new i686? .
View 3 Replies View RelatedIf I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies View RelatedI have downloaded some new network card drivers, and done the process of:make clean modulesmake installdepmod -aThis appears to have worked (after some faffing around with the c code as it did not compile initially), as I can do modinfo eg1032v3 and get data back.However, eth0 continues to use the old r8169.ko driver from the kernel.
View 2 Replies View RelatedI know that current just pushed kernel 2.6.33 down, but has anyone been successful in building the nvidia drivers against this new kernel? I'm not having any success with the 190 driver and the 195 beta driver. There are some patches that I found on the nvidia forum, but so far, nothing is working.
View 14 Replies View RelatedI have installed the nvidia drivers (first the nvidia-glx-96, then the nvidia-glx-173 and last the nvidia-current or nvidia-glx-185) in ubuntu 10.10, and i need to know what i need to change to run with version 96 sometimes then change to 173 or 185 other times, because the same hd must run on other hardware sometimes.I think its just a case of change a symbolic link to start another version, but im not sure.
View 1 Replies View RelatedHow do you install new video drivers in Slackware 13.1? I think I'm using the vesa driver now but I'm not sure.lspci -v:
Code:
root@darkswamp:~# lspci -v
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express
[code]....
I just updated Fedora 11. Kernel got updated to 2.6.30.8-64.fc11.i686.PAE. But during boot it says that nvidia drivers couldn't be enabled. It works perfectly well in the lower kernel versions. Am I the only one facing the problem? I've nVidia Corporation C51 [Geforce 6150 Go] (rev a2) in my laptop.
View 4 Replies View RelatedI updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
I was having trouble installing rt73sta, then i came across a thread that showed me how to blacklist the rt drivers, then i realised the ubuntu live cd came with the rt drivers already , but after a while the drivers disappeard i un-blacklisted the others and ive even tried a fresh install of the cd but i get nothing under lsmod|grep rt, i don know were theyve goneWould they be there if i done a fresh download and burn of the cd? Or is it something to do with my computer? it seems funny theyve just gone and not on a fresh install even after formatting hard drive and deleting and re-sizing the partitions
View 2 Replies View Relatedconfig file for kernel compilation that will only contain the drivers for the current hardware that are needed for the running kernel?
i.e. I am not 100% sure which drivers I need to compile into the kernel but do not want to compile all of them for my laptop??
Where it is possible to download CentOS 5.3 with the last updatings of a kernel, drivers?
View 13 Replies View RelatedI recently reinstalled Wheezy on my laptop and after the install was finished I installed the brcmsmac driver, using the instructions on this wiki page: [URL]. I have the device BCM43224. I noticed though that this driver seems worse compared to the proprietary broadcom-sta I had on my previous installation and so I would like to switch. I know that there is a guide on how to install the proprietary drivers on the wiki ( [URL]), but it feels like i should remove the free driver before I install the proprietary one, and I dont know how to do this .
So my question is: what is the proper way of changing from the open brcmsmac driver to the proprietary broadcom-sta driver?
I have reinstalled Fedora 11 i386 four times now. After I install the Nvidia drivers from rpmfusion I start having intermittent problems with no sound at bootup. Null output. I've posted here about this problem but received no responses so this must not be a common problem.
Would it be possible to change the order that the drivers load so the nvidia driver loads after the sound drivers?
I have two Ubuntus installed on my computer, but 10.04 doesn't have the right graphics driver, because it's not fast like the other one.So I need to change my graphics driver.Does anyone know how?
View 5 Replies View RelatedI am trying to install FC 10 from a DVD. It gets to part where it says "Running Anaconda" and the monitor goes "no signal". I am assuming that the video drivers are incorrect. What can I do to change the drivers before anaconda runs?
View 2 Replies View RelatedI'm using the liqorix kernel and have been updating when new versions become available. However, every time I install a new version and restart, I have to re-install my video drivers. I don't think this is normal, but I could be wrong, I'm basing my past experience on updating Ubuntu kernels. So is this normal? Is there a way I can prevent myself from having to re-install my video drivers every time I update my kernel?
View 3 Replies View RelatedI am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
View 8 Replies View RelatedI run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
from Ubuntu 8.04.2, kernel 2.6.24-24-lpia to Ubuntu 8.04.2, kernel 2.6.24-27-lpia Drivers Lost / Missing: Wireless via USB, Printer, Webcam, Sound, etc. No indication whatsoever there would be problems with the upgrade except for the changes in /boot/grub/menu.lst which I merged by hand to avoid problems.
Please advise:
A) What to do next?
B) Where in the Ubuntu bugs do I open this bug?