Networking :: ALL Ralink Drivers Have Disappeard From Kernel 9.10?
Apr 23, 2010
I was having trouble installing rt73sta, then i came across a thread that showed me how to blacklist the rt drivers, then i realised the ubuntu live cd came with the rt drivers already , but after a while the drivers disappeard i un-blacklisted the others and ive even tried a fresh install of the cd but i get nothing under lsmod|grep rt, i don know were theyve goneWould they be there if i done a fresh download and burn of the cd? Or is it something to do with my computer? it seems funny theyve just gone and not on a fresh install even after formatting hard drive and deleting and re-sizing the partitions
View 2 Replies
ADVERTISEMENT
Jan 12, 2010
I'm running a dual boot Vista/Ubuntu Jaunty. I made some changes to the grab menu so that my windows OS would appear at the top of the list .I know I could have changed the default so that Vista would have been highlighted instead of Jaunty. But the reason I moved it to the top is because when I do a kernel update, I would still want Vista to be the default booting OS. Anyways, after the update my Vista OS disappeared from grub. It didn't get deleted because the Vista partition is still accessible from Jaunty. Can anyone help me boot into Vista and preferably make it the default OS even after a Kernel update? I attached part of my menu.lst .
View 9 Replies
View Related
May 31, 2011
I'm trying to install drivers for my Ralink 2573 USBrt73usb ethrnet card; however when I go to the cite and download them then extract them go to the Module folder and do ~$make I get this Quote:
[Code]...
View 1 Replies
View Related
Jul 8, 2010
After having my usb wifi adapters working fine for some time, they stopped working and I can not get network connectivity.
Some one else was using my box and they reported seeing a kernel panic and then rebooted the box. Now there is no connectivity through the wifi interfaces.
I have seen the kernel panics related to this driver before, but usually a reboot has no ill effect.
Code:
root@Algalon:~# iwconfig wlan0
wlan0 RTxx70 Wireless ESSID:"a800" Nickname:"RT3070STA"
Mode:Managed Frequency=2.412 GHz Access Point: 00:0B:86:9A:08:80
Bit Rate=54 Mb/s
[Code].....
View 3 Replies
View Related
Jun 24, 2009
I'm new to linux ...
i have managed to install vnc server on my linux server ..
and also installed GNOME, i connected via VNC Viewer and the desktop showed ..
but then i closed the command prompt windows that was opened on the desktop, now when i connect via vnc viewer i get an empty desktop ...
how can i re open the GNOMe?
there's no cammand line in it now!!
View 2 Replies
View Related
Jun 25, 2011
Well, I reinstalled after this update fiasco we just had and now I am having issues with my driver resetting. I open terminal and type in:
Quote:
sudo rmmod rt2800usb
Finishes properly. I then pull my USB device, plug it back in, new driver kicks in. Wireless then works fine. However, upon reboot, it's back to using the rt2800usb driver, which doesn't work. So I head back to terminal and repeat the step above and all's well after.
I am fairly new to Fedora, so how can I actually get Fedora to completely blacklist the rt2800usb driver?
View 4 Replies
View Related
Jan 22, 2010
I have a rt2500 wireless USB adapter ( WLI-U2-KG54-AI ). I tried to use it on 2 computers loaded with Ubuntu 9.10. It worked well in WEP mode, but I am now trying to connect to a WPA router and the connection fails (the network manager icon keeps rolling forever). WPA works well on those machines when using another wireless adapter (not rt2500 based). This adapter also works well with WPA under windows. Is this device supposed to work with Ubuntu in WPA mode
View 9 Replies
View Related
Jul 17, 2010
I am running Ubuntu 10.04 (32-bit) on a MSI A5000 which appears to have a RaLink RT3090 wireless card. So far everything seems to work except the Wireless card.
The problem is that no option for wireless appears in the network manager, it only shows the options for wired connection. This computer does have a button on the front to enable/disable wireless and I have confirmed that is is on, as there is a green indicator light showing this.
Can anyone tell me the status of the RaLink RT3090 with Ubuntu 10.04? I have looked through various posts here about getting this card working with earlier versions of the OS, where complicated procedures with mixed and apparently intermittent results are described. Do these measures also need to be followed with 10.04?
I have attempted several older solutions found in assorted threads here and I am still unable to get the card to even so much as show up in the network manager. The proceedure which seemed the most promising is here [URL]
View 2 Replies
View Related
Aug 19, 2010
I am trying to get my usb wireless to work on Ubuntu 10.4 I found a how to and followed it but when I did a Make install this is what I got.
make -C /home/ronald/Downloads/DPO_RT3070_LinuxSTA_V2.3.0.4_20100604/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/home/ronald/Downloads
[Code].....
View 5 Replies
View Related
Jan 18, 2011
It was recommended for my older Compaq desktop with a Celeron processor and 256mb of ram. I got the windows driver installer installed, but it was looking for a inf file and the driver I have on the cd is an executable file for an installer, so it wouldn't work. The cd also has a linux driver, but I do not know how to use terminal to install it. I'm at my wits end. I feel pretty stupid, because I know nothing about linux.
View 9 Replies
View Related
Feb 1, 2011
I've followed these instructions exactly but when I get here: Quote: Reboot and you should see an ra0 interface when you run the command 'ifconfig'
[Code]...
View 9 Replies
View Related
Feb 13, 2011
I downloaded a ralink driver for my wireless usb adapter and just need a bit of help installing the driver (RT3572USB)
View 9 Replies
View Related
May 16, 2011
i am trying to get skylink 802.1n usb wirless adapter working under ubuntu 10.4 lts.https://help.ubuntu.com/community/WifiDocs/WiFiHowTowell, it seemed to see something at first:
user@host:~$ lshw -C network
WARNING: you should run this program as super-user.
...
[code]....
View 2 Replies
View Related
May 10, 2009
I'm here because maybe this is a rare situation: I'm trying to mount a home server using a wireless card.
This is the output of my /sbin/lsusb code...
I'm trying to connect with this card but I don't know how.
View 19 Replies
View Related
Jan 7, 2010
Even with both machines in the same room, I'm only getting 1Mbps when using a pair of TL-WN321G wireless USB adapters to link my main box and my laptop. I'm using Fedora 11 on both machines. It is just as bad if I use the laptop's built-in wireless. lsusb shows the adapter uses the Ralink RT2501USB chipset. iwlist wlan0 rate gives "wlan0 unknown bit-rate information."
View 1 Replies
View Related
Apr 19, 2010
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
View 1 Replies
View Related
May 13, 2010
I have an EEEPC 1000HE that has an AzureWave AW-NE766 wireless card. As far as I know, the card is based on the Ralink 2860 chipset.
It always worked fine under eeebuntu 3.0, but I just installed Ubuntu NBR 10.4 and now it's not detected at all.
Kernel : 2.6.32-22-generic i686
lspci and lshw show no mention of wireless card at all. Network-manager and wicd both show wired connections, but no mention of wireless at all.
I followed the instructions on the "Solved" post to install the latest Ralink driver from Jan 29. It all went fine, except "ifconfig wlan0 up/down" and "ifconfig ra0 up/down" both return "ERROR while getting interface flags: No such device"
how to tell Ubuntu that I have a wireless card in there?
View 1 Replies
View Related
Dec 27, 2010
I bought an USB-WLAN stick, which does not recognize any network. A Ralink 802.11 bg WLAN Stick works fine, but the Ralink 802.11 n WLAN Stick does not work unfortunately. Both get recognized by the nm-applet of network manager but only the first one recognizes my network and is able to connect to it.
[Code]....
View 2 Replies
View Related
Feb 5, 2011
Just built a new computer and I think I somehow need to activate my wireless card to get it working.The hardware seems to show up. I get "Wireless Networks" in my network manager but it is grayed out and says disconnected. I think it is an easy fix I just cannot find it.
[Code]...
View 4 Replies
View Related
Feb 12, 2011
Ralink's drivers for wireless adapters [url] with .dat-file to configure default properties of used WiFi adapter (at my case - RT2870.dat).
Example is below.
I'd want to fine tune adapters (I have two of them) to get maximum performance for streams between two WiFi clients connected to my router (JWNR2000 at my case).
At the moment I have changed WirelessMode=6 to force 802.11n mode (and it does work). Speed between WiFi-clients is about 3MB/s now. I want more How to?
Code:
View 1 Replies
View Related
Aug 4, 2011
I have new emachine 1401 and I can't get it to connect to wireless. It does detect networks but when connecting keeps asking for password over and over and never connects. I don't have wired connection at all and the wifi router is not managed by me, so I'm retyping output through my windows xp samsung netbook which works over the same wireless network...
I have tries some other solutions I found around here (install bcmwl-kernel-source, rt3090-dkms_2.4.0.4, blacklist rt2800pci...) so it's not original configuration but behaves exactly the same.
[Code]..
View 2 Replies
View Related
Sep 1, 2011
I installed the driver from Ralink (2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO) and followed the instructions in other threads and my card does not work. I am getting this message.
"$ dmesg | grep -e rt5 -e wlan
[ 14.454006] rt5390sta: module license 'unspecified' taints kernel. I have also installed the Ralink RutilT program using synaptic. I can see my wireless device and many others around me but I can't connect.
View 9 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Aug 6, 2010
I just installed Fedora 13, and now I figured, maybe I don't know so much about pc anyway. Before I tell you my problem, I would like to say that I know a lot about windows, but about linux, I don't know anything. A plain beginner. And about my problem, it's more like a "how to" question than a problem.
You see, I don't know how to set up the wifi? The pc has installed wifi, and all I need to know is how I can connect to the internet. In windows you would usually just press the connection icon and then choose witch network you would like to access, and then eventually type in the password, and there you go. But it seems it's a little more advanced at Fedora. But I will give it a shot.
View 11 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Jul 22, 2010
I have an Acer Aspire One ZG5, which is running (Desktop Version) 10.04. I've been happily using the built in wifi adapter, but now I've got a new wireless hub that supports 802.11n and I want to exploit the higher connection speed. I've bought a wireless usb that has no external markings, however, using 'lsusb' I've managed to establish it contains ralink 3070. Any ideas how I get this to work? When I plug in the wireless dongle from another laptop I get two connections available for use in network manager, but when I plug this one in nothing seems to happen.
[Code]...
View 3 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Mar 10, 2011
I just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
View 4 Replies
View Related
Mar 31, 2011
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
View 9 Replies
View Related
