I am trying to install FC 10 from a DVD. It gets to part where it says "Running Anaconda" and the monitor goes "no signal". I am assuming that the video drivers are incorrect. What can I do to change the drivers before anaconda runs?
View 2 RepliesI'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
After installing Fedora 14 and being satisfied with the behaviour and the packages installed for it, i want to replicate the same installation in a few more PCs, so i installed Revisor to make with it an iso file that reflects my actual installation.
The problem is that if i run the software from Applications->System tools->Revisor, nothing happens after giving the user password.
Then i run it from a consele and this error is produced after giving my password: "Cannot find anaconda-runtime in /usr/lib/anaconda-runtime"
But anaconda is the environment used for installation, so it is installed from the very begining. Why this happens?
I have F12 and been using the livecd-creator command since F9 to create liveUSB devices which are used to install Fedora on all the systems (nearly 100) I support at different sites ensuring they have the same build/configuration. About a week ago, I created a new image and when I attempt to install to hard drive, there is an ABRT message displayed;
"A crash in the anaconda-12.46-2.fc12 package has been detected"
Also see attached file.Now I am not able to install to hard drive.
It appears this is a known bug which has been reported at url.and that there is not fix planned. Can anyone confirm this?
If this is the case, does it mean that the �Install to Hard Drive� feature will no longer be available?
I explain in with an example:
Imagine you want to know which command is carried out when, after executing gnome-mouse-properties, you go to the Touchpad tab and click on "Enable mouse clicks with touchpad".
Another example:
Imagine you want to know the command that is executed when, after running gnome-appearance-properties, you go to the "Visual Effects" tab and click on None.
I've had a look via gnome-system-log in all the log files of the left with no success. Perhaps the commands that run when one changes things in the GUI menus are logged in some other file. Or perhaps they are not stored in any log. In this case there is probably some terminal command to know it, or some program for this.
I think that know that no xorg.conf is used by default this is something to have into account.
I'm trying to install F12, over my existing F10. I ran preupgrade, and it installed anaconda into the boot menu, without apparent problems. On reboot, however, it fails with the following message:Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.Cannot retrieve respository metadata (repomd.xml) for repository: anaconda-InstallationRepo-200911081854.i386. Please verify its path and try again.I must admit to being a bit unclear as to what's going on here. Is it looking in the cached pre-install tree for said repomd.xml, but said tree is somehow corrupt; or is it trying to find it via the network, and failing (for whatever reason).
View 1 Replies View RelatedI have just installed the new Ubuntu and have most things working on my Hp 6735s, i have beed playing around and find that i cannot change the Visual effects, it looks for the drivers and doesnt find them, could you please advise what i need to do to get this working. The graphics card i believe is a ATI Radoen 3200. Any help would be great, also dumb it down for me as i have been so used to windows im not that up on terminology of everything.
View 2 Replies View RelatedIm actually using Fedora 11 in Dual Boot with VistaI used to have Fedora 11 and then I installed Ubuntu and it (and myself) screwed my partitioning, and Just linux used to run.Ubuntu wrote the boot sector over the NTFS like it was ext3.I tryed everything the get beck my windows partition booting.Reinstalled a Fedora 11 clean, to see if it could help me (thinking in reintstall it later).Using testdisk application I managed to have back access to my disks files, but no boot working. I tryed a lot of things in testdisk and Windows Vista Recorvery, with no work.
So I ran the Acer Recorvery Disks, that reseted my NTFS with Vista to a brand new installation from Acer.Now I want a Full Fresh Fedora Install from DVD but anaconda tells me (in pt-br): "Error in processing the disk sda. Maybe it would be necessary to reinitialize. YOU WILL LOOSE AL THE DATA IN THIS DISK."I really cannot reinitalize it becouse my NB have some recorvery partitions that I use to reinstall the windows to its factory settings, and Im scared of reinitalizing it becouse maybe it could just screw everything and make it not work as well, now with no OS running.The GNOME Partitioning Software just detect a full unpartitioned hard drive. I think the problem is that I changed the LVM to something wierd that anaconda dosent recognizes.Some hardware information (my fedora is in PT-BR):Quote:
dmraid -r
no raid disks
blkid
[code]....
Anaconda instakler.The details of the architecture of the anaconda installer.
View 3 Replies View RelatedI decided to upgrade an old box I use as a server at home. I had been running F8, but after it's end of life and numerous patches since then it was getting a little shaky. I downloaded the KDE Live CD (picked that arbitrarily really since I don't run X on this box - just didn't want to do the whole install over the net) and off I go.
So I booted the CD and added "liveinst" as a boot loader option to kick off the install without starting X and KDE. Just as Anaconda was starting, I got the message "there is not enough memory for a graphical install" and the text based installer starts up. Kinda strange, I thought, since this box had the "recommended" amount of ram mentioned in the F12 release notes. Oh well, so their docs are wrong - wouldn't be the first time and anyway I'm used to doing text based installs from way back.
But this one wasn't like any I'd seen before. After the welcome screen there were only 4 questions - keyboard type, language, timezone, and disk options. Also, at various stages odd characters similar to the Russian alphabet started popping up in various areas on the screen. When it got to the disk options there were 3 - use entire drive, replace existing linux install, and use free space. I picked the 2nd one and moved on. The next screen said my choice was about to be written to disk blah blah blah - but gave me no option to specifiy which partitions to use or how to use them. I should mention here that this box had 3 partitions on it - 1 for swap, 1 for root, and 1 for var...........
I have run preupgrade; the image won't fit on the existing boot sector; so it wants an internet connection, which it has. Then it bombs after it detects the existing installation (Fedora 11), and also detects where the boot record is, which I tell it update. The bug report file generated by anaconda is attached. I would have done this in Bugzilla, but for some reason it will not recognize my login.Critical information:quad x86_64 machine, 8 GB memory, dual boot, two hard drives. hard drive 1 has Linux, hard drive 2 has Vista, the mbr is on hard drive 2.It is possible the unusual configuration is the cause of the problem. I do hope I can get around this, because there is so much stuff installed that it would be a real pain to start from scratch.
View 5 Replies View RelatedI recently got a shiny new msi notebook and I decided I wanted to dual-boot Linux on it (with Windows 7 Home Premium 64-bit). I started with Ubuntu, when that failed (the GUI wouldn't install properly) I tried Mint. It worked fine, but for some reason, I hate Mint. I deleted the Mint partitions and attempted to claim back the free space in a new partition for Windows 7. For some unbeknownst reason, it failed. Since I didn't desparately need the hard drive space, I said "screw it" and went about my day.
After seeing a friend using Fedora, I figured "why not?" So I downloaded F14 and burned it to a disc and booted it. All went well so I tried installing it. The install process went normal until I reached this screen: I press "Next", and I get this: (Full text here) I start to think that anaconda has something to do with my hard drive partitions, so I open Logical Volume Manager.
Partition 1 is a recovery partition (12 GB).
Partition 2, I have no idea, but it's only .1 GB.
Partition 3 is the Windows 7 partition (172.29 GB).
Partition 4 is 113.20 GB.
Unpartitioned space is 113.20 GB.
I know this can't be right, because my hard drive is only 320 GB (and those GB aren't even "real" GB) and the partitions add up to 410.79 GB. I'm thinking that Partition 4 and Unpartitioned space are the same thing, and the existence of the Partition 4 record is the aftermath of the failure to reclaim the disk space for Windows. So how do I go about fixing this (getting rid of Partition 4 or finding a work-around)?
I tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies View RelatedI'm running F11 and I'd like to run anaconda to install another instance of F11 to a second (blank) hard drive in my system. I'd like to do it without rebooting. The second drive is removable.What's the magic?
View 1 Replies View RelatedI known the Driver Disk can be loaded by anaconda when specifying the 'dd=xx' parameter. But how should I do if I still want to use these drivers which are included in the Driver Disk in an up running Operating System?
I have not a real environment to test it, but looks like the driver modules in the Driver Disk won't be installed into the real installed system. Am I right? Are there some tools which can load Driver Disk in a up running Operating System?
I have a launcher for Quake that essentially runs a shell scripts that runs quakespasm with certain options. Is there a way to add it to AWN?
View 6 Replies View Relatedi did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies View RelatedTried to install Fedora 12 by booting from CD#1 on a Mac G4. First, got a message that video RAM allows only for text installation. OK, but then Anaconda (12.46) just installed some bare-bone software set without any option of package choice! After a longer search I found there`s. no choice for text install! how to configure the net and install things using text mode only (no GNOME present).
I'd like to install Fedora12/13 on a external USB 2.0 HDD. Ive managed to do so with the live image several times, but the DVD installer does not see that particular USB HDD so I cannot install Fedora on it. Its the same with F12 and F13.Ive already tried to start the installation in expert mode. The expert option is ignored or something (linux expert/expert does nothing). Im not sure where exactly to write the options. I chose the rescue line and changed rescue to expert (nothing happend).
Then Ive tried Ctrl+Alt+F2 > "modprobe usb-storage" with no output (that should be right, right?). Again nothing.How to start anaconda (the DVD installer) in expert mode?How to load proper modules (to get the USB Drive to be recognised)?How to install Fedora12/13 from DVD onto USB2.0 HDD?
I'm trying to install Fedora 10 on my samsung HDTV with my PC hooked up via DVI-HDMI. All the text screens look fine, but when it loads the graphic installer, the video gets corrupted, but i have a mouse, but a few seconds later it freezes and hangs, and I can't do anything. Nothing loads. This happens with the livecd's as well.
View 3 Replies View RelatedI've some problems upgrading to version 10 from version 8. My workstation is certified by RedHat. It's a HP xw6600 with double processor Intel Xeon 5405 2.00 12M/133 QC and graphic card for dual screen Nvidia Quadro NVS 290 PCle. In my OS library I found version 8 to install. It has been installed successfully! However; I've read about advantages for workstation on version 10. Thus, I've downloaded Fedora ISO ver.10 and I've tried to install it in my WS. Here I found a problem: Just in the moment it try to start anaconda, the screen remain black. After three failed intents, I have tried to upgrade my version through the 'yum':
# yum -y update
# yum install preupgrade
# preupgrade
It ran perfectly till anaconda try to run again. Then, I've tried to upgrade to ver.9 from ver.8 and I getting the same problem. I've downloaded the Live CD and that is blocked as well. Of course, I've installed all drivers of my WS before upgrade but I get the same problem. So... How I can fix this problem?... I really need move to version 10. Ah!... I've tried to install beta version 11 but after one hour I get a error messages due at a bug
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
I am going to install Redhat Ent Linux 5 into VMWARE software . My host machine also RHEL 5 . But every time , in VMWARE server , when I install the O/S , it hangs when the screen comes to ,"running anaconda , Ent linux system installer .. ..please wait ..."The problem not solved during the five hours .
View 1 Replies View RelatedI had F11 i586 installed on my X86_64 machine. I used preupgrade to move up to F12. (I had the space problems noted elsewhere, but eventually got all of the F12 packages installed.) Grub now has the following titles:
Fedora (2.6.31.5-127.fc12.i686)
Upgrade to Fedora 12 (Constantine)
Fedora (2.6.30.9-96.fc11.i586)
If I boot to F12, it boots up to a point where I get garbage graphics and the system freezes. If I boot to F11, SELinux relabels and the system then boots normally. I'd like to boot normally into F12.
It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.
View 14 Replies View RelatedI've just upgraded my from F11 to F12 via software update and found F12 extremely slow to the extent that only the mosue cursor moves, the rest does not - not even opening folders or starting application.
My specs:
Core2Duo
1GB RAM
160GB HDD
It seems that
npviewer.bin is taking up up to 50% of CPU. Xorg takes 20%..
I just installed Ubuntu on a laptop that is running windows 7. I accidentally tried installing a piece of software from the software centre before setting up my network. When I boot Ubuntu it now runs in low graphics mode only.
View 9 Replies View RelatedI tried installing Ubuntu 9.10 using both Ubuntu Desktop CD and the Netbook Remix on a EEEPC 1005HA with an external CD drive.
In both cases I don't get any graphical interface during the installation. The CD is apparently installing everything silently, without letting me change anything on the way, and then it gets stuck.
The only screen I get is the first one, with the options to "try Ubuntu" or "install Ubuntu".
What's going on?
Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.
But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%
It is a sad day indeed, but I need to run a developer's tool that only runs on Windows, and it interfaces with a USB device that doesn't do well through any VMs I've tried. I've resorted to installing XP.
Now, I'm wondering if there will be any problems I'll face installing XP after Ubuntu 10.04 has already been installed? I suspect so, but it's been a while since I dual booted, and I've never worked with Grub2,