My laptop has only 2GB of RAM so I don't think I need the PAE kernel, also there are some drivers that I want to install, they were built for non-PAE kernel.
So far I read that I have to change the :
/etc/sysconfig/kernel
---------
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes
[Code]....
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies View Relatedi'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
View 2 Replies View RelatedTrying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies View Relatedthere is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View RelatedI use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
I've been using Fedora 12 for about a month, and i'm very happy with it. Even tough, there's only one thing that worries me, and is giving me problems at the same time. I'm getting an error from: syslog@localhost that says: kernel:Uhhuh. NMI received for unknown reason b1 on CPU 0 kernel: Dazed and confused, but trying to continue. Kernel: seems to be a problem, likely on the PCI Bus
I'm not able to reproduce the problem every time i want, but, sometimes happens when i activate the snow effect combined with the cube effect, using kwin. My computer and OS specifications are: Pentium IV HT(disabled) Nvidia Geforce 8400gs 2 Gb Ram DDR2 (1xGB, 2x512) Hard Drives: 2x80GB Using Fedora 12, KDE 4.4.1, with Nvidia privative drivers, nouveau disabled
From F12 to F13. Is there anything I should remove before updating? I have few programs isntalled from source/binary installers in /usr for example. Would it cause problems?
And is there any chance to be able to switch from a 32 bit kernel to 64 bit kernel during the update? The hardware is capable of this.
I used Backtrack 5 and Fedora, basically I'm trying to install my wireless card but I don't have these installed to make && sudo. I burned the iso images for backtrack and fedora and booted my computer from them but can't figure out how to install kernel-devel on backtrack for example. I dled yum onto my flash drive but can't figure out how to install it.
View 14 Replies View RelatedWhat's the command for installing kernel headers for the currently installed kernel?
View 2 Replies View RelatedI have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
View 6 Replies View RelatedI just installed the latest kernel today and reinstalled the nvidia driver using " nvidia driver in F12 using the run method." [url]
I boot in X properly and then the automatic bug reporting tool icon showing witht he following error:
If i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies View RelatedI am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
uname -a
"
Linux localhost 2.6.31.9-174.fc12.i686.PAE #1 SMP Mon Dec 21 06:04:56 UTC 2009 i686 i686 i386 GNU/Linux
"
the above output was found after installation and running an application software other than operating system. Also it shows error below.
"
- Verifying all software dependencies are available: ERROR
* The following files were built for an operating system other than Linux:
......
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
View 12 Replies View RelatedI'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
As a follow-on to something Telemachos said in another post:
Quote:
Originally Posted by Telemachos
You can see what kernels you have installed - to check if you have a virtual kernel and to clean up - by running this command:
Code:
If you've been installing kernel-headers along with the kernels (say to build modules for graphics or wireless), you should remove those when you remove the corresponding kernel. The command to search for those is parallel:
Code:
I would have thought that removing a given kernel package would trigger the removal of the older kernel headers. Can someone confirm that is, or is not, the behavior? I ask this because it seemed to me that the older kernel header packages were indeed removed when I removed some older kernel packages.
For example, the linux kernels I have installed are:
Code:
Also, the linux-headers packages I have installed are:
Code:
So, when I get around to removing the linux-image-2.6.25-2-amd64 package like this:
Code:
I would expect apt-get to automatically also remove linux-headers-2.6.25-2-amd64 and linux-headers-2.6.25-2-common. Is that what will happen, or do I need to explicitly state all three packages on the apt-get remove command?
The 486 kernel works just fine, and while I have only 1GB of RAM at the moment I hope to have 2GB someday and would like to take advantage of the dual core CPU, so I would like to configure grub to run the 686 kernel by default. For whatever reason, it runs the 486 right now and the 686 fails in a major way: there is no network connectivity at all. It could be plugged into my cable modem router and it shows no wired connections. The fact that one works and the other doesn't puzzles me since I haven't touched either since the install and a few rounds of upgrades.
I should mention I'm newbie but getting better; I managed to install debian on this x60, yet while preserving the factory install rescue & recovery partition and preserving the factory install MBR so that ibm-specific hardware functions (thinkvantage button, etc.) still work. This required me to use dd to copy the first 512 bytes of my debian partition to a file in the windows partition, etc., and modifying the windows bootloader. (I wish I had learned dd long ago--it rocks). I did this because if I ever resell the X60, the fact is most people use MS Windows and having that partition adds a perception of value to some potential buyers; not to mention I paid $ for it (I was young & stupid) so why should I delete it. I also backed up the recovery partition on another drive using dd over NFS in case the hd ever heads south.
Anyway, I've never been comfy with messing with the kernel. I did once recompile a module for ALSA because it had a bug in it for an old Yamaha integrated sound card on an old PIII and the newer version worked [alsa fails on this x60 too but I think I found a post on here that has a solution I will try later]. But I'm clueless as to networking modules, not to mention the correct module is installed already from Intel for this chipset. So what is there to do?
Here's a clue: the ifconfig output is radically different from the 686 and 486 kernels. Looks like hardware is not being detected since eth0 fails to show:
I would show the diff output below if it weren't so long--and not allowed--upon 2 text files, the first holding the output of modprobe -l under the 486 kernel and the second under the 686 kernel.
I'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).
I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."
After this, I tried: 'sudo yum install kernel-devel kernel-headers'
To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies View RelatedI get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
I'm trying to run extract-ikconfig because I've mistakenly deleted an old kernel config that I'd like to recover. However, when running the script from the latest (2.6.32.5) tree I run into this error:
Quote:
ERROR: Unable to extract kernel configuration information.
This kernel image may not have the config info.
Coincidentally, this happens with all of my kernel images. Is it a fixable problem? I should really set CONFIG_IKCONFIG_PROC next time..
I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.
Running Arch Linux 64bit, most recent version.
Kernel Output:
Code:
My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.
Dell laptop booting from a USB stick with a CentOS 5.5 minimum installation.
Uncompressing Linux...OK, booting the kernel.
Red Hat nash version 4.2.1.13 starting
sda: assuming drive cache: write through
sda: assuming drive cache: write through
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd-dev failed: 2
Kernel panic - no syncing: Attempted to kill init!
1. Does minimum installation not drop on a kernel or initrd with ext3 support? I can't imagine that's true, but have to ask.
2. The USB stick is single partition ext3. Maybe there is some limitation specifically related to USB stick booting that requires boot to be FAT16 or FAT32? Except the CentOS 5.5 installer refuses to let me install on either FAT.
3. How can I do the equivalent of lsmod on a linux installation that will not boot? i.e. I have CentOS x86_64 running in VirtualBox, I can plug the USB stick in there, so how do I get information on the USB stick's kernel and initrd if I can't boot from it?
4. Is it possible to rebuild the i386 based initrd on this USB stick, when the computer is not booted from that stick, with a system that's x86_64 based?
System Info:
Dell Latitude i686 Laptop which has run CentOS 5.5 and Fedora 12,13,14 in the past, and boots from Fedora 14 Live CD transferred to a USB stick. So I know USB booting is possible on this machine, and this stick.
The process of creating the stick:
CentOS 5.5 i386 on a USB stick. Old Dell i686 laptop which has previously run CentOS 5.5 installed from DVD, and has successfully booted from this same USB stick holding transferred Fedora 12,13,14 Live CDs. CentOS 5.5 was installed onto the USB drive directly by the CentOS 5.5 DVD installer (running virtualized in VirtualBox 4.02 on Mac OS X 10.6.5.). No errors or complaints during installation.
For whatever reason, the installer did not do some things correctly. First Grub wasn't working correctly, I got that sorted out and have the Grub+CentOS splash screen, it finds vmlinuz and the initrd, and then I get a kernel panic.
Ext3 was built into the kernel and that's why I'm getting this message. I do not know how the installer would have dropped a kernel or initrd during instalation that that don't contain such a basic thing that obviously comes in linux kernel 2.6.18-89 EL.
I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).
Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.
I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?
I can give the driver code if it is necessary.
The RHEL 4 update 7 installation CD installs the kernel with version 2.6.9-78.EL and therefore must contain corresponding vmlinuz and initrd.img. However I would like to have an all modules initrd that is used during installation but for a different version (2.6.9-78.0.13.EL). Is there a way in which I could obtain/make such an initrd?
View 3 Replies View Related