Fedora :: Install The Nvidia Quadro NVS 110 169.04 Drivers - Error "No Precompiled Kernel Interface Was Found To Match Your Kernel"
Nov 2, 2009
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
View 5 Replies
ADVERTISEMENT
Oct 1, 2010
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
View 1 Replies
View Related
Jun 6, 2010
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
View 8 Replies
View Related
Oct 26, 2010
After re-make kernel 2.6.36,there are two failures in the boot massage:
1:/lib/modules/2.6.36/build/[FAILED]
2hecking for module nvidia.ko: [FAILED]
two warning
1:nvidia.ko for kernel 2.6.36 was not found.[WARNING]
2:The nvidia driver will not be enabled until one is found.[WARNING]
View 14 Replies
View Related
Jun 17, 2011
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
View 2 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Mar 29, 2010
Forgive me if I have posted this in the wrong forum, first time poster with Fedora. I have been using Linux for some time now, mostly Mint, but Fedora 12 @ work. Anyway, I receive the following error in my /var/log/boot.log:
Code:
nvidia.ko for kernel 2.6.32.9-70.fc12.i686 was not found
and the driver does not load (My xorg.conf file is not loaded), but once I am at a
[code]...
View 3 Replies
View Related
Jan 2, 2011
I'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
View 9 Replies
View Related
Jan 14, 2010
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...
View 1 Replies
View Related
Jun 6, 2011
after updating kernel and installing nvidia drivers, the startup splash(I dont know the proper word) has changed into bar type. How can it be corrected .
View 3 Replies
View Related
Jul 7, 2011
I was trying to update the new nvidia drivers since they dont seem to work in the newer kernel, or to try to fix it but now when i run yum update I get a screen like this:
Downloading Packages:
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.38.3-18.fc15.i686.PAE is needed by (installed) kmod-nvidia-2.6.38.3-18.fc15.i686.PAE-1:270.41.06-1.fc15.i686
[Code]...
View 4 Replies
View Related
Dec 3, 2010
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies
View Related
Apr 21, 2010
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
View 6 Replies
View Related
Jul 4, 2010
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies
View Related
Mar 2, 2010
I know that current just pushed kernel 2.6.33 down, but has anyone been successful in building the nvidia drivers against this new kernel? I'm not having any success with the 190 driver and the 195 beta driver. There are some patches that I found on the nvidia forum, but so far, nothing is working.
View 14 Replies
View Related
Aug 6, 2011
I have a Dell Vostro 3500, which has a Broadcom wifi card. It requires non free drivers. So far it has been working well. However, after updating the kernel (via yum update), my wifi card (it used to be eth1) is totally gone: $ ifconfig eth1 eth1: error fetching interface information: Device not found The wireless indicator does not light up either. The kernel version is
[code]...
View 3 Replies
View Related
May 29, 2010
I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
View 1 Replies
View Related
Feb 20, 2010
I just installed the latest kernel today and reinstalled the nvidia driver using " nvidia driver in F12 using the run method." [url]
I boot in X properly and then the automatic bug reporting tool icon showing witht he following error:
View 6 Replies
View Related
Jun 29, 2010
I need to install VMWare Workstation on Fedora 13, but I keep running into the following error -
"C header files matching your running kernel were not found...."
It's looking for 2.6.33.3-85.fc13.i686 but when I did a - yum install kernel-devel I got 2.6.33.5-124.fc13.i686
when I do - yum install kernel-devel `uname -r`
I get the following -
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package kernel-devel-2.6.33.5-124.fc13.i686 already installed and latest version
[code]....
View 5 Replies
View Related
Apr 16, 2011
I was upgrading my machine from 10.04 to 10.10 through the update manager yesterday. Half way in, my power was cut off due to a storm. Now I can't boot up and says a message like "NVIDIA kernel cannot be found" blah. I know my drivers are down and what not. When I boot into the recovery mode I get the error "fsck from util-linux-ng 2.17.2 /dev/sda2/: clean, 441017/886437 files, 5443336/3536363227 blocks" I guess I just need to download the rest of the software, but how? I don't have a CD burner on hand, only a 8gb USB, but I don't know enough command line to run the USB using the GRUB command line. I just want my files from my /home directory.
View 1 Replies
View Related
Oct 31, 2010
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
View 2 Replies
View Related
Jul 6, 2010
I am running kernel 2.6.32-23-generic-pae and since updating nvidia drivers do not work. I go into hardware drivers and activate but I get dropping to low resolution desktop or VGA not supported.
View 2 Replies
View Related
Jan 13, 2011
I need to install some module which needs to be interated into OS's.
It asks me: "What is the location of the directory of C header files that match your running kernel? "
I know that I need kernel-devel package and I installed this yum install kernel-devel after that I have this /usr/src/kernels/2.6.32.26-175.fc12.i686/include/
Now when I run configuration it does not work
Does it mean that I need to update the kernel so that it matches to the kernel-devel module available in the net?
View 4 Replies
View Related
Jul 25, 2011
I have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/2.6.37.6-smp/source and .../build links to /usr/src/linux-2.6.37.6-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
View 6 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Aug 14, 2011
Whenever I update my kernel, I have to re-install the NVIDIA drivers, and this has always worked for me so far. I have the latest version of the Developer Drivers for Linux (270.41.19). After updating to the 2.6.40-4.fc15.x86_64 kernel, the nvidia installer fails with the error (/var/log/nvidia-installer.log):
Quote:
If you are using a Linux 2.6 kernel, please make sure you have configured kernel sources matching your kernel installed on your system. If you specified a separate output directory using either the "KBUILD_OUTPUT" or the "O" KBUILD parameter, make sure to specify this directory with the SYSOUT environment variable or with the equivalent nvidia-installer command line option.
Depending on where and how the kernel sources (or the kernel headers) were installed, you may need to specify their location with the SYSSRC environment variable or the equivalent nvidia-installer command line option.
ERROR:
The kernel sources are installed. Installation works properly in 2.6.38.8-32.fc15.x86_64
View 9 Replies
View Related
Jun 15, 2011
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
View 5 Replies
View Related
Oct 13, 2009
I am trying to install VMware on my machine. I have downloaded VMware and I am now trying to configure it. After accepting the EULA, the program states;
Code:
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] y Then;
Code:
Using compiler "/usr/bin/gcc". Use environment variable CC to override. What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include] The path "/usr/src/linux/include" is not an existing directory. What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include] /usr/bin/gcc The path "/usr/bin/gcc" is not an existing directory. What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include] How do i find where the C header files are?
View 14 Replies
View Related
Mar 2, 2010
its openSUSE 11.2 I am already running sles10sp3, windows2k3, and winxp virtual machines, but when I try to install SLES11i586 I got following error message Error No kernel was found, The installation may have failed
[Code]...
View 1 Replies
View Related
Oct 20, 2010
I get the following error message trying to install dazuko on xubuntu 10.04: "headers for target kernel version could not be found" But when I run sudo apt-get install linux-headers-$(uname -r), I get the message that I already installed the headers. My current kernel is 2.6.34-020634-generic
How can I install dazuko withouth having this problem??
View 1 Replies
View Related
