Hardware :: Water Spilled On Samsung NC10 - P Key Not Working
Jan 29, 2010
I inherited a water damaged Samsung NC10. A glass of water was spilled on the keyboard. I have dried the system out and it is now booting without issues. My only problem is that the keyboard has one key (P) that will not work at all. Every other key is fine. I removed the keyboard and reseated the connector ribbon but this has had no positive effect. I plugged a USB keyboard in and (P) works. Do you think that this means that the original keyboard is dead and should be replaced to have a fully functioning NC10? Or is it possible that water damage has made it so that no matter how many NC10 keyboards I plug in, it will have the same problem?
View 2 Replies
ADVERTISEMENT
May 31, 2010
I have a Samsung NC10 and want to use my built in webcam on TokBox. However, when I try to use it, my camera and mic do not work. TokBox gives be a "Devices Disabled" message. It says set to "allow" and click ok, but there is nothing to click. I also can't get the camera to work with video chat in Gmail.
I know the the camera works because I can get it to work in Cheese. The mic, I can't get to work at all. I have gone to the Macromedia site and set the settings to "allow", but still no go.
Both work fine in XP (I have a dual boot), so it's not a hardware problem.
Info:
OS: EasyPeasy 1.6 (same as latest Ubuntu Netbook Edition)
Adobe Flash Player: 10.0.45.2
Browser: Firefox & Chromium (didn't work in either)
View 1 Replies
View Related
Mar 21, 2010
i installed compiz-fusion and activated the water effect. when i use the keystrokes to initiate it or toggle the rain, nothing happens. i've tried to find information on how to fix it to no avail
View 7 Replies
View Related
Mar 1, 2010
I spilled a beverage on my wireless keyboard & everything works except the space-bar. I hate to replace a keyboard cause of that, so is there any way to remap the space-bar to another key? I've looked at all of the options & can't find anything. I'm using 32 bit Karmic & a logitech wireless keyboard.
View 6 Replies
View Related
Sep 29, 2010
I just installed a minimal Debian Testing on a USB stick to be used with my Samsung N220 netbook. I installed X and noticed that about half of the keys are not working. I fail to find any configuration tips on google
View 3 Replies
View Related
May 26, 2010
My printer, a Samsung ML-2251NP is not working correctly with Slackware 64 13.1. On Slackware64 13.0 it worked flawlessly, but now everytime I print it is just solid black on the whole page. I usually selected either the ML-2250 driver or the ML-2551N driver and it worked, but now I have this problem with both of them. I print a lot, so I need a working printer. It works fine in Windows 7. This is a network attached printer.
View 11 Replies
View Related
Aug 21, 2011
wireless not working in Samsung notebook RC520
View 5 Replies
View Related
Apr 14, 2010
I just bought a samsung r580 laptop. this is the first time i've ever owned a laptop. I have owned a pc with ubuntu 8.04 installed on it and the internet worked trouble free. Now I have windows 7 and ubuntu 9.10 dual booted on my samsung r580. I used wubi to install and the internet works fine in windows but will not work in ubuntu. I have been trying to get this to work for about 5 hours now
View 6 Replies
View Related
Nov 7, 2010
I just upgraded from Ubuntu 10.10 (64 bit) from Ubuntu 10.04 (64 bit) on my Samsung R580 laptop [URL] So far all my hardware seems to be working except the laptop's integrated camera. In 10.04 the camera worked and I could use the program "Cheese" to take photos and videos with the camera. In 10.10 I installed Cheese and tried to use my laptop's camera but it didn't work. I installed all the available updates for 10.10 but still the camera wouldn't work. The only information about the camera on the laptop's webpage is that it is a 1.3 MP Web Camera.
View 2 Replies
View Related
May 20, 2011
just installed Ubuntu 11.04 x64 on my Samsung R580 and cannot get the wireless to work/detect any networks around me (it looks like its on though at least as far as the indicator lights show on the notebook). I tried search around a bit and wasen't able to find anything...
View 1 Replies
View Related
Feb 12, 2010
I have a Macbook Pro 2,66 Ghz (June 2009) and i also use a Samsung T240HD-Screen. The Mac has a MiniDisplayport und i use a converter to HDMI. I don't get a signal on the external screen. It is displayed in the X-Server-Settings and i can configure it (Resolution, Twinview, Position and so on) but when i go to the GPU-Section all the Information in the section of den T240HD-screen is "unknown". Nvidia Driver Version: 190.53
View 2 Replies
View Related
Jun 5, 2010
Just installed on my netbook the latest version of ubuntu (10.04). Have seen a few issues with other users however they have seemed to be able to make fixes.My problems are:
- Screen half brightness no change (does anyone have a fix yet?)
- Wifi not working (tried updating kernels, says they're the latest)
- Multi touch not able to be enabled, (again have seen a fix but for some reason won't work)
View 8 Replies
View Related
Sep 3, 2010
i followed this thread and got mediatomb on my ubuntu 10.04 lucid running. i have a samsung UE-32B7020 tv.
the only problem is that for .avi and .mp4 movies (these are the ones i tried), fast forward and rewind do not work. transcoding is not enabled.
View 7 Replies
View Related
Jan 21, 2010
Once enabled, how would you stop it completely, not with the wiper.
View 6 Replies
View Related
Sep 4, 2010
I needed to load Linux on a Samsung Q1Ex for a project I'm contracting on, and could not for the life of me get anything to run. Turns out that the video card is a chrome relative, and for some reason, almost every distro out there (I usually use debian for this sort of project - ie, no money, but use SLES at my day job) failed to even get to textmode console. Trying several distros, I finally put it out there and used OpenSuse and voila!, vga was working. After that, I got X running, and many hours later had the mouse working. The key to this device is Windows. I ended up parsing through the registry looking for "touch" and found that the software in use on Windows is eGalaxTouch. A quick google brought up their site where I found several Linux drivers. I used the beta mode drivers to get the mouse working. Here is a more detailed breakdown.
Use OpenSuse 11.3 (I used the full blown disc - its is the only distro I could get to boot correctly as the others all used OpenChrome, while OpenSuse seems to use fbdev - note here that installing the unichrome drivers will actually break X and cause you to have to reboot to get away from the mess on the screen). Use eGalaxyTouch drivers. The pdf's included in the download have step-by-step instructions but the big pieces are the setup.sh script and the serio_raw steps (note if you perform a 'hwinfo --bios | more' you can figure out which /dev/input/event* you're using - for me it was event1 and serio4). Note also to choose PS/2 when executing the setup.sh script provided in their download. eGalax_eMPIA Technology Inc. TouchKit Linux Driver Here is my xorg.conf now:
Section "ServerLayout"
InputDevice "EETI" "SendCoreEvents"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
On the video, just stay with the fbdev and you should be good. So far, I've had KDE, Gnome, TWM all running; and now have my EFL apps running! Woohoo! Next piece of the puzzle is to verify sound, but on the face of it, looks like the system recognized it off the bat. And of course one other note. 11.3 is going to make me a convert!
View 1 Replies
View Related
Jun 9, 2010
I have been running Fedora 12 on my HP Proliant DL140 Server for about 6 months now without any issues, yesterday I ran yum update and rebooted afterwards but the server now wont boot
View 14 Replies
View Related
Feb 26, 2010
I have downloaded SUSE 11.2 Genome CD and trying out in my PC before install. Whenever I unmaximize/maximize a window it shakes kind of like Images in water. Is this some special effects which can be turned off?before installling as I have never seen this thing in Windows XP.
View 3 Replies
View Related
Nov 15, 2009
Is there a program that can simulate chinese watercolor style painting? I know gimp can apply some brushes and has water color, but in chinese watercoloring, you load different colors at the same brush stroke (kinda like a gradient with one color at the tip and changing towards the middle of the brush). I haven't been successful with gimp's brushes to have a nice smooth watercolor or painting stroke, it looks still computerized and "stepped"
View 1 Replies
View Related
Dec 28, 2009
I used fedora 11 with no problem. Then I did a fresh install of fedora 12. The laptop started making some strange noise something like water dripping or like that. I noticed this long back but I couldn't describe the problem so I waited if I can find something on my own. Even now I'm not sure if anyone can understand whats going on. Just trying my luck. To make sure it was not my laptop( hardware ) problem I went back to fed 11, no strange sounds there. Same thing happened when I upgraded to Ubuntu 9.10 from Ubuntu 9.04. I'm no expert in operating systems. I do not know what is common in Ubuntu 9.10 and fedora 12 , but they are giving the same problem.
View 2 Replies
View Related
Jun 26, 2010
im using Ubuntu 10.04 and whenever i enable it and try to iniate it it just makes my screen black =/. It sucks because i really loved that feature (on 64-bit btw)
View 9 Replies
View Related
May 13, 2011
I like ubuntu alright, but prefer Debian overall. Before I reinstall Debian I was wondering if during the install if the latest release would automatically recognize the Samsung ML 1665 as the latest ubuntu release did. If not, how does one get the printer installed.
View 3 Replies
View Related
Nov 1, 2009
On Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies
View Related
Sep 9, 2010
I've up until recently been using Mint on my n210, but as I really liked the look of openSUSE (Gnome) I have changed to 11.3. So far I love the distro, but I am having a little issue - some fn key combinations aren't working (brightness in particular). When in Mint I was able to install a couple of programs made by Voria (from Linux On My Samsung), is there such a program for openSUSE?
View 3 Replies
View Related
Mar 12, 2010
I've just gotmy new phone a SamsungGT-S5230! My problem is:I can't transfer any file from my ubuntu desktop over to my phone. On the CD it came with there is only a windows software called "PC Studio" and Windows drivers. As I plug in the phone via USB to the PC it offers 3 options: PC Studio, Media Storage, Background Storage. If I pick one of the first 2 options my phone says it is connected, and charges via USB. The third option says "Please Insert a MicroSD card". (I don't have such at home). Ubuntu can't see my phone, none of the options seem to work. Maybe I should buy a MicroSD card? Or is there a workaround for the windows software to run ubder Linux? I tried to install t with WINE, but it froze during the installation.
View 4 Replies
View Related
Apr 15, 2010
I am trying to install Ubuntu 9.10 on a Samsung Q1 Tablet PC but it reaches a point when the screen becomes smokey and then after a few seconds gets black, forcing me to abort.
View 3 Replies
View Related
Mar 5, 2011
I have just purchased the Samsung N150 net-book. The reason for purchasing was so I could watch movies, listen to music and browse on the go. It came with windows 7 starter and a load of pre installed Samsung crap. I was wondering whether Ubuntu would be a better choice for me since I only really want, Chrome, VLC, Spotify, MSN and Dev++ compiler.
I am very computer literate doing programming at Uni, but have not used Linux before. Also there's loads of Samsung software for extending battery life or something. Will I be able to install that on Ubuntu or not?
View 6 Replies
View Related
May 25, 2010
Tried installing all the Samsung ML-**** from the list. PS Getting really tired of booting XP every time I want to print something.
View 3 Replies
View Related
Jun 1, 2010
I bought a new printer from SAMSUNG ML2245 Model. In my system (fedora12), I could not print anything. Then I found that this model samsung ML2245 does not exist in the list box. And I tried to use generic printer, that is also failed. How to install the driver for this model?
View 1 Replies
View Related
Mar 16, 2011
How can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies
View Related
Nov 5, 2010
I have a 650Gb HDD usb drive that I wish to use with ubuntu 10.04LTS aswell as on a WINXP system. HDD is clean. My ubuntu system has a /home partition formatted to EXT3, but as I use IFDRIVE to read this partition from windows, it needs to be set to have inode of 128 eg (mkfs.ext3 /dev/sdb1 -i 128)
my way of thinking is I need to partition the drive, format the drive to EXT3 making sure that is set inode to 128 How do is the best way to do this?
Then I need to get ubuntu to talk to this drive when I plug it in How do I do this?
View 5 Replies
View Related
