Ubuntu Multimedia :: Camera And Mic On Samsung NC10 - TokBox Gives Be A Devices Disabled Message

May 31, 2010

I have a Samsung NC10 and want to use my built in webcam on TokBox. However, when I try to use it, my camera and mic do not work. TokBox gives be a "Devices Disabled" message. It says set to "allow" and click ok, but there is nothing to click. I also can't get the camera to work with video chat in Gmail.

I know the the camera works because I can get it to work in Cheese. The mic, I can't get to work at all. I have gone to the Macromedia site and set the settings to "allow", but still no go.

Both work fine in XP (I have a dual boot), so it's not a hardware problem.

OS: EasyPeasy 1.6 (same as latest Ubuntu Netbook Edition)
Adobe Flash Player:
Browser: Firefox & Chromium (didn't work in either)

View 1 Replies


Hardware :: Water Spilled On Samsung NC10 - P Key Not Working

Jan 29, 2010

I inherited a water damaged Samsung NC10. A glass of water was spilled on the keyboard. I have dried the system out and it is now booting without issues. My only problem is that the keyboard has one key (P) that will not work at all. Every other key is fine. I removed the keyboard and reseated the connector ribbon but this has had no positive effect. I plugged a USB keyboard in and (P) works. Do you think that this means that the original keyboard is dead and should be replaced to have a fully functioning NC10? Or is it possible that water damage has made it so that no matter how many NC10 keyboards I plug in, it will have the same problem?

View 2 Replies View Related

Ubuntu Multimedia :: Samsung R580 Laptop Camera Not Working In 10.10

Nov 7, 2010

I just upgraded from Ubuntu 10.10 (64 bit) from Ubuntu 10.04 (64 bit) on my Samsung R580 laptop [URL] So far all my hardware seems to be working except the laptop's integrated camera. In 10.04 the camera worked and I could use the program "Cheese" to take photos and videos with the camera. In 10.10 I installed Cheese and tried to use my laptop's camera but it didn't work. I installed all the available updates for 10.10 but still the camera wouldn't work. The only information about the camera on the laptop's webpage is that it is a 1.3 MP Web Camera.

View 2 Replies View Related

Ubuntu Multimedia :: Why Are Devices Detected Even When Disabled In BIOS

Dec 5, 2010

I am having problems understanding how sound capable devices are being used on my Ubuntu10.10 64 bit system. I have an ASUS A8V motherboard with on-board multimedia functions provided through the VIA V8237 chip. BIOS gives me the option to disable this functionality and I have set BIOS this way. I want to use an M-Audio 24/96 card for all sound processing.

However, in applications like Audacity the VIA chip functions are all available and can be set as recording and playback devices. The same is true in ALSA.

Why does 'linux' (I have no idea which part of the OS) ignore the BIOS settings?

Furthermore alsamixer always selects the 'default' devices. Where and how are these set?

<System><Preferences><Sound> hardware tab list 2 'Internal Audio' devices but no M-Audio device. What are these devices? Only 1 of them appears to create any output with the 'Test Speakers' tab. This confuses me completely because the speakers are connected only to the M-Audio card.

None of the profiles for 'Settings for the selected device' match the capabilities of the M-Audio card (1 set of stereo inputs and 1 set of stereo outputs). So where are these profiles coming from? Which do I select for the M-Audio card?

What do the Input and Output tabs in <System><Preferences><Sound> mean? Are these different to the hardware tab? The 'Output' tab lists2 devices for sound output: 'Internal Audio Analog Stereo, Stereo' twice. What devices are these ?

View 6 Replies View Related

Ubuntu Multimedia :: 06a2:0003 Topro Technology - No Camera Found - Skryba Says No Devices Found

Mar 29, 2010

I have been trying to get this web cam working for a long time. lsusb:

Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.

[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]

Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?


View 3 Replies View Related

Debian Multimedia :: No Audio - Error Message - No Volume Control GStreamer Plugins And/or Devices Found

Sep 2, 2010

I'm brand new to debian and quite new to unix based systems in general.

I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.


just two problems I have with debian:

No sound

Error message: No volume control GStreamer plugins and/or devices found.

When I try to open sound from the speaker icon at top right.

I think it's a driver issue but Its not as easy as ubuntu was lspci:

My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.

View 3 Replies View Related

Debian Multimedia :: Web Browsers - Message " XYZ Has Been Disabled For Your Protection"

Jul 11, 2010

After jerking around with that utterly useless iceWeasel " XYZ has been disabled for your protection" and the other useless Epiphany " mousey no worky y preferences ? No you don't have any. I wiped that garbage clean and stuck Google Chrome on here. Everything works pleasingly well. I screwed around with it and didn't care for the beta. " Stable"

View 1 Replies View Related

Ubuntu Installation :: Input Devices Disabled 10.4?

May 2, 2010

Upgraded from 9.04 to 9.10, touchpad on my laptop stopped working, but i had my USB mouse so I upgraded to 10.4. After the reboot, both the USBMouse and touchpad no longer work, rendering my Ubuntu Installation a useless. Luckly I have OpenSuse installed on this laptop as well. I have a Gateway MP6954

View 1 Replies View Related

Hardware :: "samsung Pl55" Camera Compatible?

Apr 6, 2010

I can't find anything on the internet either way, so if anybody has any experiences with this camera please let me know as i don't feel like blowing �80 on something that won't work

View 3 Replies View Related

Hardware :: RF Devices Disabled After Returning From Suspend To Disk?

Feb 19, 2010

After returning from suspend to disk, RF devices (wlan and bluetooth) are disabled. Running lspci indicates that no wireless network device is available, and no drivers are loaded. Furthermore, the LED on the front of the laptop remains off - this is always on when RF devices are available. There is an Fn-F1 function key to toggle wireless, but this does not function to either enable or disable.

Rebooting the system does not re-enable the RF devices, and there is no option in the BIOS. The only workaround I have at present is to boot into windows vista and use the Fn-F1 function key. This pops up a small hotkey utility with the option to disable/enable the wi-fi and bluetooth (independently). Upon confirming the dialog, the RF device light immediately illuminates. Rebooting into fedora and wireless devices are working once again.

I am running kernel, with the latest compat-wireless drivers. I can provide much more debug information (dmidecode, acpidump, boot logs, lspci etc...), I am just unable to determine what is relevant

# rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no


View 2 Replies View Related

Ubuntu :: Error Message - Connect Debounce Failed Port 3 Disabled

Sep 14, 2010

Connect debounce failed port 3 disabled. i get this in the terminal (alt+f1) every time i log on. i like this terminal better than the standard one and i want the error message to stop appearing every time i try to type something.

View 5 Replies View Related

General :: Error Message - No Volume Control GStreamer Plugins And/or Devices Found

Jun 20, 2010

Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....

"No volume control GStreamer plugins and/or devices found"

View 2 Replies View Related

Ubuntu Multimedia :: Can't Set Max Resolution For Samsung SyncMaster 943

Apr 30, 2010

I've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf


View 3 Replies View Related

Ubuntu Multimedia :: Samsung LED TV And HDMI Connection?

Jan 13, 2011

Just thought I might save someone some time if they are trying to use Mythbuntu with a Samsung LED TV. If you run into the issue where the desktop is larger than the screen even with everything set to 1920x1080i and you tried a customized EDID file to no avail. Go into the menu on the TV and select Source List, Edit Name, then chose the HDMI and change the name to be either PC, DVI or DVI-PC. Either of these three setting should correct the over sized display issue.

Now if you happen to want audio over HDMI and are using the HDMI Computer connector that Samsung so nicely provides. Make sure you don't choose either of the DVI options above as these mute the audio coming over the HDMI connector and instead enable the pin audio jack next to the HDMI connector.

View 6 Replies View Related

Ubuntu Multimedia :: 10.04 Does Not See Camera?

Aug 28, 2010

I recently did an upgrade to ubunut 10.04. I have a nikon d70 that I plugged into the computer to download the pictures off of but to my surprise my computer no longer sees the camera. I did a search and found a few threads about USB cameras and skype but nothing about this issue. Is there anyone else having this problem?

Is there a fix for it? So far everything has been working OK with UBUNTU 10.04 I would hate to go back to windows xp only because I am not able to download the pictures from my camera.

View 3 Replies View Related

Ubuntu Multimedia :: UVC Camera To Run At 30 Fps?

Jan 14, 2011

Can I run this camera:


Bus 001 Device 007: ID 046d:0809 Logitech, Inc

as something other than a UVC driven camera?

It appears that UVC in 640x480 format is only available at 15 fps. I need to record at fps=30. So I can splice into existing video.

##Turn on webcam and save video and audio output to file.
# check if there is no command line argument


View 1 Replies View Related

General :: Which Camera Can Use In Laptop To Have More Better Quality Than Iphone Tiny Camera

Jul 17, 2011

I was looking to iphone and i was surprised the quality of such tiny camera.

Is there any alternative camera for my laptop to have similar or much better then the one in iphone? So that i can use it from my laptop, but have very sharp HD quality with maximum megapixel + highest frame per second.

View 1 Replies View Related

Ubuntu Multimedia :: ATI HD3300 And Samsung SyncMaster T220HD?

Jan 12, 2010

I've installed my mythbuntu 9.10 and the ati driver 9.11 via DVI connection to the monitor and all work correctly. Today I bought an HDMI cable because I want to use only this cable to send video and sound to the monitor and as so I connected via HDMI and I started the PC. After the computer starts, it showed correctly the booting information and mythtv but as soon as I exited from mythtv to use the pc as a desktop I found that the chars, the icons as so on were very big. I've tried to run the Ati contol center and the resolution of the monitor was correctly 1680x1050. I've tried to restart the computer with the DVI and all come back to usual, so I tried to switch off the monitor unconnet the DVI and connect again the HDMI and when I switched on the monitor the display was again ok. After a restart of the system the situation was the one I've told before (big chars, etc.).

View 2 Replies View Related

Ubuntu Multimedia :: Samsung IPOD YP T10 Dont Work On 9.10?

Feb 13, 2010

My samsung ipod yp-T10 works fine on windows but it does not on ubuntu.I have not installed any software to run it on ubuntu except there is Rythmbox and it does nothing when i scan the removable media.Whenever i try to open the music folder of my ipod it gives this error:The folder contents could not be displayed.orry, could not display all the contents of "Music": Failed to get file list: -8: Fixed limit exceeded.

View 9 Replies View Related

Ubuntu Multimedia :: Samsung Intensity Only Recognized In MP3 Player

May 28, 2010

I'm currently in the process of seeing if I can finally make the switch to linux from windows. So far everything is good, except for my MP3 Player. I use a Samsung Intensity with a 16gb microsdhc card, connected to my computer through a USB. The problem is that Ubuntu doesn't recognize it. Now rhythmbox will recognize it if I have it set to MTP mode, but you ubuntu itself never mounts it. I need it to mount so I can drag and drop files into specific folders on the card. Otherwise I doubt rhythmbox will know where to put the files. The addition of another person to the linux family depends on it. Since I only want to use windows for certain games and not any more than that.

View 2 Replies View Related

Ubuntu Multimedia :: Install New Printer Samsung ML 1665?

Aug 31, 2010

i dont know how to install my new printer samsung ML 1665. Please help someone. I have downloaded the driver.tar.gz from samsung

View 1 Replies View Related

Ubuntu Multimedia :: How To Use Camera Webcam

May 19, 2010

i have camera webcam on my laptop..but it didn't work.

how to install correctly with the right step?

View 2 Replies View Related

Ubuntu Multimedia :: Changing The Screen Resolution In 9.10 Samsung Monitor

Jan 27, 2010

I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30 - 75
VertRefresh56 - 61


With both 1600 x 1200 and 1680 x 1080 I get the resolution but I see lots of shadowing.(The letters are not crisp) Do I need to upgrade any driver ?

~$ lspci | grep -i vga
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)

View 1 Replies View Related

Ubuntu Multimedia :: 9.10 X64 - Samsung LN40C530 - Screen Lock Up And Become Inactive

Apr 15, 2010

Video card: nVidia G86 GeForce 8500 GT (rev a1) (lspci | grep VGA) Monitor: Samsung LN40C530, recently switch to from a generic Gateway 17" monitor that worked fine I've been using 9.10 x64 from a clean install since it came out and it's been working great. I recently upgraded my monitor from a generic 17" Gateway monitor to a Samsung 40" widescreen HDTV (LN40C530), and that's when the trouble began. At first, the screen would lock up and become inactive. I could move the mouse, but clicking did nothing and the clock wouldn't update. I also could not switch to a terminal via Alt+F1, I could only do a hard reboot.

Then, when it started booting up, I would get horizontal black and white lines (which I'm still getting). Usually, it boots to the white glowing Ubuntu logo as files load in the background (@ 640x480, 60hz). When it tries to bring up the login screen (autodetected 1920x1080, 60z), I get horizontal white lines across. (see pics) Happens booting off both Live CD and HDD. When I use safe graphics mode on live cd, it boots okay @ 1600x1200, 60hz. After installing under safe graphics mode, it gives me a message "no modes available, resolution unsupported".

Right now, I'm back at trying to install 9.10 x64 (Karmic Koala) with either 1920x1080 or 1360x768 @ 60hz. I'm using a DVI out to a DVI/VGA adapter, and a VGA cable between the adapter and the PC port on TV. I've tried default configurations, restricted drivers 173, 185, and nVidia's 195. When I'm able to get to a terminal, I've tried sudo X -configure, but testing w/ X -config yields the same broken result. When I Alt+k+PrntScr, it does refresh but brings up the same white lines. Sometimes it boots just fine and even autodetects as "Samsung 40", but not as of the last 30 or so boots. Let me know where I can start for proper troubleshooting; I'm not sure which log files are important for this issue. Do you think I might just need to create a customized X config with exactly what I need?


View 1 Replies View Related

Ubuntu Multimedia :: Samsung U5 Sync Crashes Using Rhythmbox Or Banshee?

Jun 15, 2010

I just got a Samsung U5, and although I could drag and drop, it's not as good as syncing. I've tried using both rhythmbox and banshee to sync my music from a playlist. It only happens when I set it to MTP, that both programs tend to crash. If I set it to MCS none of them will even detect the device, but will both work fine as music players. So far, rhythmbox just freezes and won't let me do anything with the device. Banshee only syncs half of the music files and comes up with this error.
LIBMTP_Send_Track_From_File_Descripto():subcall to LIBMTP_Send_FIle_From_File failed
I've tried several times and it'll only add a couple of more songs.

View 2 Replies View Related

Ubuntu Multimedia :: Set Up As Security Camera On Computer?

Jan 8, 2010

I have a creative pc cam 300 that i have been trying to set up as a security camera, on a computer running ubuntu 9.10. I tried installing the spca5xx driver, but i can only find it for old versions of ubuntu and it doesnt work. Does anyone know how to get the driver working?

View 3 Replies View Related

Ubuntu Multimedia :: Videocamera - 9.04 - Will Not Recognize The Camera ?

Feb 3, 2010

I have a Medion camcorder with a DV-out, that I had (previously) connected to a Windows machine, on the windows machine i can connect true USB.

Now I have a Ubuntu 9.04 laptop and it will not recognize the camera.

The command lsusb I see the camera either. Now my question (s)

1. this camera,can i connect it with USB?
2. how can I install this
3. I do manage that, what software can I use best. ?

View 2 Replies View Related

Ubuntu Multimedia :: 9.1 On Eeepc 701 Camera Not Functioning

Mar 24, 2010

I have upgraded from Pre-installed Xandros to Ubuntu 9.10 on my Eeepc 701 and my camera is not been detected, even checked the BIOS, where the status is shows as "Enabled"...

View 2 Replies View Related

Ubuntu Multimedia :: Copy Files To Camera Via USB?

Apr 1, 2010

I deleted files from my camera (SDHC via USB) which I now want to copy back but I don't know how.

The camera is mounted in ~/.gvfs and the target folder is owned by my user with read/execute permissions. Couldn't change the folders permission.

I tried to mount the camera using 'gksu nautilus', but the camera didn't show up in the side panel. Unfortunately I don't know how to mount the camera from the command line, so I'm stuck.

PS: the only available card reader doesn't recognize SDHC cards, so that's not an option. And no, I won't boot Windows for that task.

View 3 Replies View Related

Ubuntu Multimedia :: IP Camera Video Streaming

Apr 6, 2010

My local priest has asked me if I can use my computer skills to stream church services live for people who can't make it to church.I said, sure thing! I thought it would be simple, but the deeper I look into it, the more lost I have become!Here's the tech requirements:

- A camera with good optical zoom and focused on the altar (the camera will be stationed at an unobtrusive point at the back of the church on the choir balcony)
- Everything must be wireless (power is available on choir balcony to power the camera).
- Sound should be synchronised perfectly with the video (have access to the church PA system - located behind altar)
- the internet connection should be able to upload the stream to a virtual server (i.e. with root access) that's accessible to the web with ease. What upload speed would I need? Would 256k be enough? HD video is not required - ..... quality would be great. We can upgrade to HD at a later point in time!
- What bandwidth requirement would my server need if say 1000 users were connected? Seeing as they would most likely be locals, would just one stream be sent to the local exchange and that exchange would send out the stream to the 1,000 users, or would each user have to have a dedicated connection to the server?
- Say I bought a camcorder with HDMI output, what kind of processing power would I need to convert this to compressed video? (I've got an old Pentium 4 and an AMD64 2.0GHz lying idle in my bedroom and it would be great to make use of 'em instead of chucking 'em on the skip)
- I'd like all this to be done so that HTML5 browsers can access the video, resorting to flash if necessary
- I'd also like to be able to power down all the hardware with ease: i.e. set a timer. I'm sure ubuntu can do this with ease? What about configuring the camera to zoom in every time it is powered on? Can linux control the zoom on a camcorder?
- Am I totally nuts?

View 2 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved