I use Cricket Broadband. I set up my USB modem using the exact same init strings, settings and other info that makes my modem work in other distros. I don't see a way to call a PPP application to make the system dial out on my CDMA modem. Where do I find one using this Live 32 bit CD?
View 5 Repliesi can't connect the internet using Skytech CDMA USB modem in my ubunntu 10.10 (Super OS) i follow the instruction in this thread url.
1. Boot w/ out device,
2. connect the device,
3. open the terminal and type..
GC224PA-UUF:~$ usb-devices
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
code....
I think I have configured GLink usb modem so far. But when I run wvdial command, I got the following. But I can not browse the internet. Other problem is when I try to use Gnome PPP dialer, it could not connect. Modem type is listed as ttyS0 and so on while I have setting in wvdial.conf ttyUSB0 so it does not support.
chitra@chitra:~$ sudo wvdial
[sudo] password for chitra:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATE0
--> Sending: ATQ0
OK
--> Re-Sending: ATE0
OK
--> Cannot get information for serial port .....
--> Initializing modem.
I have a ZTE CDMA 1x Modem (Reliance Netconnect). The modem has a USB interface and it works as a PLUG-&-PLAY device on windows (and has a Flash Storage too for driver information for windows.) I am unable to find my modem on Linux machine so that i can use wvdial for getting connected to internet on my linux machine. This the dmesg output for my modem.
[Code].....
I am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View RelatedI would like to share my internet connectivity on eth0 with another computer on eth1.
+-----------+ +-----------+ +-----------+
| | | | | |
|ADSL Router|-------------| Computer |-------------|NFS Client |
| | eth0| |eth1 | |
| | dhcp| |static | |
+-----------+ +-----------+ +-----------+
How can i maintain this network topology and allow internet connectivity with dns across my main computer?
I am using both win 7 and ubuntu using grub. If I connect to internet in ubuntu its working fine
but if I connect to net using win 7 internet is not working. However if I connect internet in ubuntu and restart win 7 without switching off router I can access net in win7 even if I switch off router and start again its working fine. But when I shut down system and router and switch on in win7 its not connection.
I have a problem on internet connectivity. Let me explain. I'm using webkit for the browser, and when I try to connect to google, it does not connect. But if I use the ip address of this, 209.85.129.147, everything works. First of I had a suspicion from DNS but it seems ok. Because when I try to ping google, it is working again. I'm using an embedded linux, this problem on a MIPS platform, not PC. But I think there should be some settings onto webkit and this should be same with PC platform.
View 1 Replies View RelatedI just installed Ubuntu 10.04 as a dual boot with Win/XP, using the text based installer. Installation seems to have completed OK and Ubuntu boots as expected - but Firefox cannot find any web-page.
How do I start look for the problem cause?
I should say that I previously had installed Kubuntu 10.04 (64 -bit). It was installed for a few months up to May 2010, but then it suddenly lost all internet connectivity after I hibernated the system. Win/XP continued to work with no error. Despite some months of help and advice from the Kubuntu forum, I was unsable to solve the problem. Indeed one piece of advice resulted in the overwriting of my Win/XP installation. I have now re-installed Win/Xp and decided to install 32-Bit Ubuntu - but I am back into the 'no internet connection' problem again. Win/XP works fine.
The internet has been working happily on my Mythbuntu machine for many months but stopped working overnight.If I try to do "sudo start networking" I get a "Job failed to start" message.There's also a solid orange light on the ethernet socket.As it's been working for months, I don't think my interfaces config needs updating.Looking at what's been updated recently on the system:
1) I've configured the machine to wake from USB. It was working for a couple of days so I don't believe this is the issue.
2) I set up wake-on-lan with ethtool. Again, this was working (although it did seem to disable wake-on-usb and required a reboot to fix)
3) Update to 11.04 - I said no to this, as 10.10 was working very nicely indeed.
I've disabled wake on lan and rebooted. No joy.
ethtool detects the ethernet controller ok and it's listed in lshw.
I'm using Linux Mandrake 9.0 on my Dell 750MHz laptop. Linux is not making a dial-up connection, but modem test showed passed. Is there any utility to fix this problem. I have to often use dial-up connection.
View 1 Replies View RelatedI am using fedora 8. I want to upgrade my system but I don't have internet connectivity I cannot use yum can any body tell me from which site I can get all the rpm packages specially gcc, glibc so that I can take them in my pen drive and install in my f8.
View 3 Replies View RelatedI am new to linux. Whenever I boot my system. I always have to click on system eth0 to enable internet connection in network settings. How can I make it permanent so that as system boots up, network connectivity is itself enabled.
View 1 Replies View RelatedI had my desktop running ubuntu 10.10 at my sisters house hooked up to a router sharing internet with her boyfriend never had a problem with it there. I moved into my own apartment this week plugged the cable modem directly into the broadcom ethernet card and couldn't get an ip or anything it wouldn't connect period so I ended up hooking it up usb which works but only at speeds of 5-7mbit when I have 15mbit connection. So I put another ethernet card in hoping it was just problem with the card and tried it that worked.
I got a connection but it was incredibly slow like getting maybe 5k a second so I open network tools in administration menu and start pinging google. While I'm waiting on a bandwidth test to complete and it takes off getting like 20mbit keeps that connection for a while then out of nowhere just drops to almost nothing. Again for a few minutes then falls off completely so I restart and it does the exact same thing starts off slow then something clicks and it works great for 5 min then nothing?
I have a host on ubuntu and I think I would like to virtualize my web-server. So, to be more clear I have for instance the ip 92.124.74.8 to the main server (where virtualbox will be installed). After I will install the web-server into virtualbox it will have the address 196.168.1.10
So, how can I specify on the main server 92.124.74.8 that all the requests on port 80 to be transfered on 196.168.1.10 (virtual machine). The problem is that on 92.124.74.8 I don't have access to the router/switch. Is there a possibility to make this forward from the main machine 92.124.74.8?
I'm coming from CentOS background and it's first time using Debian and currently stuck with setting up a working Virtualbox Debian Guest installation
Problem 1: no internet connectivity by default, but internet works fine from within the virtualbox Debian Guest OS if i use debian's internet browser
Problem 2: only internal 10.0.2.15 ip works (NAT) while my 2nd host only adaptor doesn't work out of the box
With CentOS all i needed to do it get it all working was when creating new guest on Virtualbox is setup 2 NICs, first one is NAT and second one is host-only adaptor. After installation, i can connect to internet and also from host OS connect to guest CentOS via 192.168.56.101 ip. But with Debian 6.0.2.1 64bit i defined both NAT and host-only adaptors, and out the box, only 10.0.2.15 is defined.
Default /etc/network/interfaces
root@debian1:/etc/network# cat interfacesbackup.txt
# This file describes the network interfaces available on your system
[code]....
I've just installed Fedora 10 to basically work as a NAS for another machine - but also serve a couple of web pages. After having alot of issues with network manager (with it changing the subnet so nothing would work), I'm now almost there:
I have two network cards connected in the server:
1) eth0 connects to a switch that ultimately connects it to the net (on a 10.0.0.* network)
2) eth1 connects directly into another server for backups (192.168.0.* network).
Now when I setup eth0, I get network access can ping/ update/ surf the net - absolutely no problems, but when I connect eth1 in - the net dies and nothing works, I can ping devices on both the 10.0.* and 192.168.* networks, just nothing past the gateway. I presume this is either a route or DNS issue, but am unsure about where its falling foul - both the resolv.conf file looks fine as do the ifcfg-ethx scripts.
Lately, my internet connection stops for several minutes and then re-connects. Since there are few issues to debug here (router, modem, ADSL, internet provider), I would like first to measure the failure rate. Is there a utility or script that will do the following: Wake every 1-2 minutes, verify a certain web page is available (doesn't matter which). If it fails: dump a line to a log file and get back to sleep. If OK - get back to sleep. Is there such a utility?
View 4 Replies View RelatedI have an iphone, I am trying to get internet connectivity to that phone through wifi. I dont have a wifi router. But i do have a laptop with wifi card. I am connecting to internet via cable modem. In win7 I used to create an accesspoint and do the ics from ethernet card to share via wifi card. It used to work perfectly.
Now as I am sing ubuntu, i want to do the same. I have intalled firestarter, and shared the internet connection through wifi card(wlan0).After this I created an accesspoint using the gnome network applet. Now i can connect my ifone to ths accesspoint. But there is no internet connectivity in my fone.
how to install firmware-b43-installer without internet connectivity. I downloaded firmware-b43-installer from another computer with internet. Then I found out from the error messages I also needed b43-fwcutter. So I also downloaded then installed b43-fwcutter. b43-fwcutter installed with no problems. Then I tried to install firmware-b43-installer again with no luck. I saw in the error messages it said something about broadcom-wl-4.150.10.5.tar.bz2. I have no idea how to install a tar.bz2 file.
Here is where I downloaded the files I needed.
http://archive.ubuntu.com/ubuntu/poo...10.5-4_all.deb
http://archive.ubuntu.com/ubuntu/poo...013-2_i386.deb
http://mirror2.openwrt.org/sources/b...0.10.5.tar.bz2
I have all the files now so what do I need to do to install firmware-b43-installer?
I was having trouble with some software detecting ports so i removed ufw and now have no internet
Ive tried and none of these work:
I noticed today my dropbox wouldn't connect, so I reinstalled, still nothing. Tried to reinstall from the repo, nothing. While doing this I noticed that apt cannot check repos, or synaptic. Browsers have no issue but it looks like the system itself does. Same goes for Ubuntu update manager and software center.
View 3 Replies View RelatedI tried connecting my laptop configured with centos to a wired net connection but i was unable to do so.
when trying to connect i got this
Determining ip address for eth0.... failed
I'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.
Here is what I did so far:
Did an ifconfig command and I have the following:
pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95
inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)
When I go to the Network Configuration Panel I see the following:
Status: Device: Nickname: Type:
Inactive pan0 pan0 Ethernet
Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.
On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.
View 2 Replies View RelatedI can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies View RelatedJust installed Ubuntu 10.10 on dual boot computer. Each OS is on separate hard drive with GNOME selection between Ubuntu and Windows 7 Ultimate. Firefox was working fine yesterday when I went to use today, nothing. Email through Thunderbird is down as well.
View 3 Replies View RelatedOn my Centos 5 box my internet won't work. I am unable to get update and I can't download any native programs. But I have Samba running and I am able to access all my files for my other computers.
View 6 Replies View RelatedCentOS 5.5 fresh installed dhclient doesn't work. eth0 configured manually, but network is unreachable. tcpdump shows traffic
lspci -m| grep net
01:05.0 "Ethernet controller" "Realtek Semiconductor Co., Ltd." "RTL-8139/8139C/8139C+" -r10 "ASRock Incorporation" "Unknown device 8139"
lsmod | grep 8139
[Code]....
Tried to re-install Fedora 11 since I haven't been able to get my network connectivity up for some reason. But during the boot process it got into a comand prompt complaining about some boot record problem and the need to create a soft link to /etc/root.
View 3 Replies View Related