I wish to install a modem to permit dial in access (ie to be able to access the system remotely). The modem I have is an external modem on the 9 pin serial port. What configuration would I need to perform on the server?
View 1 Replies
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have a modem PROLINK PHS 100. sometimes when I plug in the modem, can be used. sometimes there is no reaction at all. What should I do.
View 2 Replies View RelatedI have FC4 installed on my system and my internet connection is a ADSL through a Router but i have a wireless isdn line as backup connection the modem i use is LG LSP 340E which is a limited mobility cdma phone with in built modem, the supplier and manufacturer has given drivers for windows only. How to install this modem onto my system, I had tried auto detection but it didn't work, I had connected the modem to the serial port in my system.
View 2 Replies View Relatedi have download all the drivers for iburst usb modem but it is not installing.
View 1 Replies View Relatedi have usb modem sierra 885 compass but i don't know how to install it, nor to make it work in fedora 7
View 1 Replies View Relatedhow to install the modem Sierra Wireless AC775 on Fedora Core 6. Fedora 6 detects the modem, but does not establish it as a device. And no entries in the directory /dev about modem. Startup Fedora 6 said that the initialization eth1 failed because no device serial_cs.
View 3 Replies View RelatedI am unable to install a ZTE AC8710 CDMA Hi Speed Modem on Fedora 10.I have somehow found the Linux Drivers but am unable to compile them as I do not have the required Kernel Headers which I can't download in Linux because my Internet is not working.I have tried the entire process of trying to add the Device ID and setting up xvdial but I am unable to find the ttyUSB or USBtty or USBacm in /dev.
View 7 Replies View Relatedhow to install broad band wireless modem (netgear)ADSL2 on Fedora core 7
View 2 Replies View RelatedI'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I just pop into my computer and idea was to dual boot with XP and gradually solo Ubuntu. But it is a bit slow (for my old hardware Penntium III , 256 ramm ) Music player asks for add ins for everything i try to play (mp3 , flv, wmw etc). I cant download those add ins as ubuntu does not let me install my modem which is (CDMA 2000 fixed wireless phone made by ZTE china). I have driver for it for xp but they dont work for ubuntu. How can I install those add ins and my modem.
View 3 Replies View RelatedI have a brand-x usb-modem and much to my suprise it had a .deb package to install the driver.The only problem is it fails during the "make" and I dont know enough about C to be able to fix the error. I'm not even sure what information is needed to help me with this chore.
View 4 Replies View RelatedI'm using Wheezy. I'd like to install modem-manager-gui, not available in Wheezy repo. How to install it (preferably without doing compiling)?
View 4 Replies View RelatedWell I got the Persistent openSUSE11.2 working. However I cannot find a way to obtain kinternet. for some reason it is NOT on the liveCD! Is there another program that I can use to connect to the repos so that I can get kinternet? I have a liveDC and an install DVD. can I install from the DVD onto the USB so that when I boot with the USB, Kinternet is available for further downloads?
View 1 Replies View RelatedI am new at ubuntu I had installed the 9.10 but couldn't get to net so stopped and right now I installed the 10.4 ubuntu but I cant get to the net. I have done install few method but the latest one said it not supported well. How to use net with my modem sagem fast 800.
View 2 Replies View RelatedI downloaded the usb-modeswitch and usb-modeswitch-data as suggested by one of the users from [URL] but whenever I try to install after going to the folder using sudo make install, none of the packages get inatalled. I am a new user and I am using ubuntu 9.10. I want to use my MICROMAX 300G USB modem to surf internet but can not do.
View 2 Replies View RelatedI recently downloaded the latest minimal Ubuntu ISO from the official download page.
Is it possible to do a minimal install if I do not have Ethernet capable internet?
I use one of those 3G (cellular) USB modems from companies like Verizon. Basically, it's a cell-phone, with the phone component taken out.
I did something similar with Debian recently, but I had to install the kernel along with the 'dpkg' package, to the HDD. From there, I had to reboot into the core system, install the packages like ppp, wvdial, etc, and then continue with a fresh install of the rest of the system.
There doesn't seem to be a way for me to either install the core files to HDD, or install the internet connectivity packages in the live environment for my modem.
how can i install the faxmodem motorola sm56.i have 2yaers of search and i dont have the answer?
View 4 Replies View RelatedI've install Linux UBUNTU in a HP Brio and i can't configure my modem correctly (HP Fast Modem D4810B with 3 com x2)
View 3 Replies View RelatedHow to install HUAWEI EG162G modem?
View 3 Replies View Relatedhow should i install the EVDO modem in rhel 5.3?
View 1 Replies View RelatedI am new to Linux and opensuse is lovely to me . However i have a problem, I dual boot windows and OpenSuse 10.3(because it plays mp3 out of the box) I actually tried newer versions but the problem is that I cant install this Huawei E1752 usb modem. I have failed people. Please help me. I need to use it for internet.
View 1 Replies View Relatedi'm trying to install zoom 3095 usb dial-up modem on my laptop which has ubuntu 9.10 on it but i got an error
Where is the linux source build directory that matches your running kernel?[lib/modules/2.6.31-21-generic/build]
Building modules for kernel 2.6.31-21-generic/build, using source directory lib/modules/2.6.31-21-generic/build. Please wait...
ERROR: Module build failed! Please examine the log file "/tmp/dgcconfig-buildlog.txt" to determine why.
dgcconfig-buildlog.txt said:
(cd /lib/modules/2.6.31-21-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.31-21-generic/build" "M=/usr/lib/dgcmodem/modules" "CC=gcc" clean)
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-21-generic'
[Code]....
I have just installed Ubunto 10.4 on a old fujitsu laptop. But I have a new router D-link 8xx and a new Gigabyte GN-WB32L usb dongel. I think I got the insallation right but Ubunto will not detect my wifi usb modem. I can see the network symbol in uppr right corner of main menu, but it�s red marked (not connected).
View 2 Replies View RelatedA problem with kppp. It will not detect modem after a fresh install. It did last week before Ubuntu 11.04 turned up its toes, but when it worked it was weird. It found the usb modem on /dev/ACM0 as user but /dev/usb/ACM0 if logged in as root. Now it will not open modem at all. Gnome ppp has no problem and wvdial correctly identifies it.
View 1 Replies View Related
