Hardware :: Sound Disabled In Slackware 13.1?
Oct 16, 2010
Up until about 12 hours ago my sound was working perfectly. Then I played a game with my daughter called Potato guy and I got a message saying that there was some conflict with the sound card.
This is the message I got:
"KDE detected that one or more internal sound devices were removed. Do you want KDE to permanently forget about these devices? This is the list of devices KDE thinks can be removed: Output: HDA Intel, ALC889 Digital (IEC958 (S/PDIF) Digital Audio Output) Output: HDA Intel, NVIDIA HDMI (HDMI Audio Output)"
I selected "no", however, in the sound configuration menu, the above devices are grayed out.
Here are some outputs:
lsmod
snd_seq_dummy 1487 0
snd_seq_oss 29884 0
snd_seq_midi_event 5620 1 snd_seq_oss
snd_seq 52643 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5459 3 snd_seq_dummy,snd_seq_oss,snd_seq
[Code]....
Linux slack 2.6.33.4 #3 SMP Wed May 12 23:13:09 CDT 2010 x86_64 Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz GenuineIntel GNU/Linux
I have reconfigured alsa but it does not make any difference. It seems that KDE is interfering here, but I am not sure. My wm is XFCE4.
View 5 Replies
ADVERTISEMENT
Jan 2, 2010
when I connect the LAN cable in mother board it is not working but when I connected an external LAN card it was working fine . Is there any solution where I can use the on board LAN
View 2 Replies
View Related
Oct 9, 2009
Decided that my internal RealTek HDA was pretty meh. I'm now using an SoundBlaster USB external. After disabling the internal sound device in System > Preference > Sound ...everything works perfectly through the external device, except Firefox, no sound at all... not even with Flash...
View 5 Replies
View Related
Aug 5, 2010
Earlier I was in windows to do school that I had to do in windows. I shut my monitor to suspend my computer, which disables my sound card. Later on I went back into ubuntu and forgot about it. Ubuntu had updates to the system and since then I have not been able to get my sound to work.
View 2 Replies
View Related
Mar 19, 2011
Because of slower machines would use this kernel? Does it mean better performance on such machines?I'm talking about kernel-generic and kernel-huge. This produces 1000 wakeups/sec.In smp kernel CONFIG_NO_HZ is set (fortunately )
View 7 Replies
View Related
Dec 5, 2010
Is there anyway to run KDE without Plasma?At install I opted out of the kdebase-workspace package, but then didn't have the xwmconfig option to run KDE.Duplicating, then commenting out the original, and on the uncommented line: removing everything after 'Exec='. Taking the 'plasma.desktop' out. ...Deleting the entire file will only get it rewritten again by the system..Now it loads into beautiful void.I still have my GUI, complete with any kApps you might want: konsole, konqueror, and even krunner; but no panels or Desktop Activities.Is it still loading plasma only no longer implementing it? Am I losing precious RAM'CPU usage with plasma getting loaded without being used?
View 6 Replies
View Related
Oct 10, 2010
I've installed SalixOS LXDE and thought it was the best thing but... After I disabled almost all services except syslog, dbus, and hald while inside lxde desktop. I rebooted and my mouse and keyboard no longer worked. So then I booted my Slackware install and edited /etc/inittab on the salix partition so I could boot into init 3 (I kinda like init 3 more than 4 anyway). Booted back into salix and keyboard seems to work but gpm doesn't... Gpm can't find any mouse so I do an lsmod and there's only about 4 modules loaded? Crap... So I dig around /etc/rc.d folder and I think it's got to do with me disabling the udev services when everything was fine after a fresh install...
I ran the init script for udev but it does nothing... I also ran pkgtool and went to setup, selected services and hit enter but it jumps back to the main menu?! I don't know if that's a glitch or what but it won't even let me pick the services with pkgtool... So what can I do to change everything back to their default value? I only booted once into my new salix install, changed services, rebooted, and then problems... I really loved the way everything was working on my first boot. Salix is one of those distro's that really gave me a happy feeling with linux so I'd really hate to stop using it over this one wrong thing I did...
View 3 Replies
View Related
Aug 30, 2010
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Aug 21, 2010
I'm currently trying to install unRaid on Slackware following this tutorial :[URL].. I'm new to Linux and after many hours, i finally managed to build the new kernel for unRAID (2.6.32.9). But audio on HDMI port doesn't work I tried alsaconf without success. HDMI sound works when i boot into the old kernel.
My codecs are :
Code:
root@unraid:~# cat /proc/asound/Intel/code* | grep Codec
Codec: Realtek ALC888
Codec: Intel G45 DEVIBX
Code:
lspci -v:
[Code]...
View 4 Replies
View Related
Feb 15, 2010
I installed Slackware 13 in VirtualBox 3.1 (seehere)When I'm logged in as a normal user, I get a mesage that Intel *** (sound device) doesn't work anymore and I hear no sound.But it works very fine when I'm logged in as root.
View 4 Replies
View Related
Jun 1, 2010
I've just finished installing slackware 13.1, but I'm not able to hear any sound.
I have tried alsaconf, but it did not help.
Here is the output of lsmod.
PHP Code:
Module Size Used by
radeon 711232 2
ttm 46904 1 radeon
drm_kms_helper 24215 1 radeon
[Code].....
View 9 Replies
View Related
Feb 20, 2010
Today I installed Slackware 13 because of some issues I'd been having with slackware 9, which I'd gradually updated, but apparently not perfectly, hence the clean install of ver 13. Anyways, I have no sound. At first I thought I had no sound at all, but then I found out that audio does work for root. When I try to run alsamixer as a non-root user, I get this error:
Code: alsamixer: function snd_ctl_open failed for default: No such file or directory Now if I run it as root though, it works just fine. If I run the KDE system settings thing, what I guess is their version of the windows control panel, and I go to the multimedia section, I can see my card, but if I click test, it says that it's failed and that it's "reverting back to ." or something to that effect.(I'm in fluxbox right now). I would imagine that there's something I need to do with respect to modifying permissions, but I really don't know what that is that I'm supposed to do.
View 5 Replies
View Related
Jun 23, 2010
I recently got a yamaha sound card from a friend because my Intel card was not working so I disabled Intel sound card from BIOS so that I can use only Yamaha card but I hear no sound in Slackware but can hear sound in my Fedora & Windows (i.e.card is working) code...
View 3 Replies
View Related
Oct 19, 2010
I got two problems. Problem 1 the sound is kind of sketchy..I thought the sound card got blown. But I heard my friend got sound on it again before we put Slackware on. Next I left him to install it while I went to class. I don't think he put a swap in. The computer is painfully slow and it can't even switch users because it looks like the ram got murdered or something. My Questions are how to test / get a working sound card. I did do the alsamixer I think the command is and turn the volume levels up yet I don't hear anything.
As far as the swap partions I don't there is one but I am not sure how to look / check to where if he made it to small or not at all.
View 3 Replies
View Related
Dec 7, 2010
This problem applies to Konqueror, Firefox, and Seamonkey. It applies equally to all forms of online sound content, from flash to yahoo media player. Yes, the sliders are up in my sound mixer! I have sound from all other apps, just not web browsers. It also applies to alluser accounts.
View 7 Replies
View Related
May 6, 2011
sound is fine in KDE, but not in Firefox.
Alsamixer shows no capture controls for the device and I get no sound through the browser. I have set the device as default. However, I get sound fine when testing in KDE's System Settings (Phonon). Sound works just fine through Amarok and Dragon Player.
How do I get Firefox to play sound through this device?
View 4 Replies
View Related
Jun 28, 2010
After installing the latest Thunderbird from the list of ~current packages the "new message arrive" sound has disappeared. I've checked the configuration and it appears to be in order.
View 12 Replies
View Related
Aug 19, 2010
I was reluctant to start yet another sound thread, but after days of searching sites and reading mini HOWTO's I'm still mute. I have tried configuring ALSA via:
# alsaconf
# /etc/rc.d/rc.alsa start
# alsamixer - all relevant sliders unmuted...
# alsactl store
...and still nothing. KDE reports that 'Audio playback device ALC889 does not work.' My kmix app doesn't even start. At boot I get this message 3 times:
"ALL CONFIG FILES NEED /etc/modprobe.d/sound - it will be ignored in a future release"
Even starting xmms brings up 'Check that - your soundcard is configured properly/the correct plugin is selected/no other program is blocking the soundcard'. btw, Windows reports I have an ALC888, not a 889. KDE lists it as present as both digital and analog, and the legacy system (whatever it is) as well as esound, but none work. I certainly had no difficulty with S11.
View 19 Replies
View Related
Oct 11, 2010
basically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
View 8 Replies
View Related
Sep 6, 2010
Got Slackware 12.2 and there's no sound. Ran alsaconf and it finds three 'soundcards' whereas I have only onboard sound. None of the choices achieve anything. Interestingly, Windows detects the sound as coming from 'C-Media AC97' whereas alsaconf doesn't see that, but reports two others:
ATI Technologies Inc. RV 610LE audiodevice Raedon HD 2400 PRO
VIA Technologies Inc. VT8233/A/8235/8237 AC97 Audio Controller
As well as:
(Legacy)
View 2 Replies
View Related
Sep 17, 2010
setting up the sound in slackware 13.1 i have tried a few things such as alsaconf but when i try alsamixer nothing comes up its showing i have no device.
View 14 Replies
View Related
Oct 19, 2010
when i plug in my headphones i was getting sound output both from the laptop speakers and the headphones, then i tried changing the sound.conf file and still no success and then i tried reinstalling the alsa - i downloaded the latest alsa-driver and alsa-lib and installed them, but when i rebooted there was no more sound from the headphones when i plug them in. I don't know what to do, i tried reinstalling alsa multiple times but still no success. Is there any way to bring back my previous configuration when i installed slackware ? Or some way to roll back using the installation dvd ?
View 2 Replies
View Related
Feb 24, 2010
on ecs gf8100vm-m5 motherboards (which have gf8200 chipset) hardware is detected ok. result from lspi|grep Audio gives
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
[code]...
View 14 Replies
View Related
Nov 17, 2010
I think it's the HDA Intel anyway. In alsaconf it comes up with, 'hda-intel Intel Corporation 82801H (ICH8 Family) HD Audio Controller', and I select that one. When I do, 'aplay /home/emor/sample.wav' it says it's playing but I don't here any audio. I've tried various configurations on both the alsamixer and the graphical XFCE sound mixer, and neither have really done anything. [URL]...
[code]...
View 2 Replies
View Related
Apr 27, 2010
I'm using slack13 and have changed entry in inittab from
Code:
id:3:initdefault:
to
Code:
id:4:initdefault:
to login straight to window system. However after that sound is gone. When I go to mixer it says that audio device cannot be used 'might be access problem'. So I've changed entry to what it was and starting X11 by 'startx' and then sound works again.
View 14 Replies
View Related
Mar 31, 2010
It's not that i use it for fun or entertainment... so, I had never noticed this...
yesterday I wanted to watch a ..... video, and no sound...
Sound ctrl works alright in my Kde 4.3.x, lspci is fine... i guess i may be missing a driver or something. code...
View 15 Replies
View Related
Mar 25, 2011
I installed Slackware 13.1 in a EEE PC 1001px. After the installation I had speaker sound but not using the headphones. Then I ran alsaconf and now I don't have any sound at all!!!
Alsamixer shows the channels: Master - Speaker - PCM - Mic Boost - Mic Boost - Capture.
What can I check to see why this is happening?
View 6 Replies
View Related
Sep 13, 2010
Only one app can use my sound card at time.
This is the alsa-info: [URL]
There's a lot of errors like that in the Internet but none really present a solution, seems like this is an old problem that has been solved a while ago by alsa, but not here.
View 4 Replies
View Related
Apr 14, 2010
Are any of you here using a HP G60 or a HP G70 series laptop and Slackware v13-64? If you have sound with this hardware and software mix, how did you do it?
View 4 Replies
View Related
