Only one app can use my sound card at time.
This is the alsa-info: [URL]
There's a lot of errors like that in the Internet but none really present a solution, seems like this is an old problem that has been solved a while ago by alsa, but not here.
I was just given a computer from a coworker and installed the latest Slackware version on it. I then installed Gnome Slackbuild and installed the Nvidia driver.I've run alsaconf and it seems to run fine without any errors and unmuted all the channels in alsamixer.
View 6 Replies View Relatedwith my motherboard the onboard back sound jack's audio is VERY quiet, but the front jacks wired into HD audio work fine. (I'm building an htpc, btw.)
I tried for weeks to get it to work, but eventually I just pulled a cheap Dynex DX-SC51 card from another machine and turns out it works, but now I can't use the inputs and headphone jack on the front of the case without going into system>preferences>sound and changing "output" back to "internal analog audio stereo"
Is there any way to activate these two audio devices at the same time?
I recently got a yamaha sound card from a friend because my Intel card was not working so I disabled Intel sound card from BIOS so that I can use only Yamaha card but I hear no sound in Slackware but can hear sound in my Fedora & Windows (i.e.card is working) code...
View 3 Replies View Relatedi have a serious problem with my ES1371 esoniq audio card under slackware 13.1 : no sound at all !!
View 2 Replies View RelatedI am running Slackware Linux-13.1. Recently I noticed that alsaconf has stopped working: when I run it all I get is:
Code:
However, sound works just as good as it did before I noticed the problem. The issue is present both with the generic kernel and with any custom compiled one.
Here is some diagnostics with the custom compiled 2.6.37:
Code:
Code:
I upgraded to a new(er) soundcard this morning on my Slack 13.1 desktop box. I ran alsoconf and got sound working in everything but Firefox flash. It's not specifically a flash problem; flash sound works just fine in Konqueror. It's a Firefox issue. I created the following login script in order to try and force the new card to be recognized as the default:
Code:
bash-4.1$ cat .asoundrc
pcm. !default {
type hw
card 1
} ctl. !default {
type hw
card 1 }
I have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedI have a linux (Slackware) machine and the time/date is like, June 23rd 2003, 10:00am (It's 11 here) and I am not able to set the time to have it correct. I change the timezome to Montreal but the time is still wrong.
Is there a way to force it to sync with my domain controler or even another online NTP server?
It looks,slackware is taking too much time to boot. It's starting daemons at boot time.
What are those daemons that i can stop at boot time to increase booting time?
What's the best way to stop starting daemons at boot time?
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedI installed Mangler and one of its requirements was pulse-audio. I installed pulse-audio everything worked great except i couldn't get sound out of wow if i started mangler first and vice-versa. I then found a version of Mangler that worked with alsa. So i uninstalled mangler and pulse-audio, installed mangler-alsa. Everything works great now. The problem is when i uninstalled Pulse-audio i lost all my sliders in Yast > Hardware > Sound > other > volume. The only thing that shows up is master volume > Test. My sound works great just can't adjust anything. How do i get my sliders back. I would like some advice before i screw something up. (lol) My Sound card is according to sound configuration SBx00 Azalia(Intel HDA) - Driver snd-hda-intel.Opensuse 11.2 KDE 4.3.5
View 2 Replies View RelatedI have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
sound card is working well inside SuSE and everything is ok there. But when I install Windows 7 or XP inside Xen Virtualization software, I can't use sound card and Windows is unable to find any sound hardware.
View 1 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
trying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
I seem to be having sound issues on CentOS 5. When I run the sound card configuration, my sound card is recognized and the test sound plays fine but there is no sound coming out of any applications. This just started today and I have made no changes to my computer or installed any new software.
Below is the output from lspci :
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
A friend has intalled Linux after a load of problems with windows. He very kindly installed my Edirol UA25 soundcard, and when i click 'test' on System-preferences-sound, it indeed plays a sound. The problem is that when I try to play anything from the internet on firefox, or any sounds in VLC, or any other application, it doesn't work. I believe I'm running Ubuntu Studio, version 8.04, but I am not sure. I have an Athlon 64 bit processor if that's relevant.
View 4 Replies View RelatedI'm trying to use an application (e.g., mplayer) to play sound that comes in my sound card (via the mic jack). (What I'm really trying to do is sync a sports broadcast by putting a delay on AM audio, as described here. I'm stuck at the part where it says "this shouldn't be too difficult".) I've seen some hints that there might be code-heavy solutions using LADSPA or some JACK SDK, but there's just gotta be a simpler way. I'm hoping for something like
Code:
mplayer -delay -7 - < /dev/mic
but I'm darned if I can find it. I'm sure there are plenty of other sports fans who would find this useful for syncing radio with the digital TV feed...
I'm running WinXP Pro on a Dell XPS 710 with a Creative X-Fi sound card. Been away from Linux for a year or so since I got this machine and would like to come back. Can you suggest/recommend a sound card (5.1 preferred) that has a high success rate with the Linux OS. I will probably install Open Suse or Kubuntu. I'm more than willing to dump the high end sound card for less flash.
View 3 Replies View RelatedMy usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
View 1 Replies View Related