Slackware :: ALSA - Sound Will Cut In And Out
Oct 11, 2010
basically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
View 8 Replies
ADVERTISEMENT
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Oct 19, 2010
when i plug in my headphones i was getting sound output both from the laptop speakers and the headphones, then i tried changing the sound.conf file and still no success and then i tried reinstalling the alsa - i downloaded the latest alsa-driver and alsa-lib and installed them, but when i rebooted there was no more sound from the headphones when i plug them in. I don't know what to do, i tried reinstalling alsa multiple times but still no success. Is there any way to bring back my previous configuration when i installed slackware ? Or some way to roll back using the installation dvd ?
View 2 Replies
View Related
Jun 23, 2010
Slackware 13.1_64, everything works like a charm,BUTevery time my slackware boots up,the sound system changes from one device to another.So if I boot now, sound address is hw:1.0.
then if I reboot, the sound address becomes hw:0.0It's really annoying, because every time I have to re-run xmms and mplayer setup to get any sound!Also, if any program is playing audio (like xmms), other programs cannot play audio at the same time.ie: if I'm listening music with xmms then I try opening some video with mplayer or firefox/flash, I get no audio on this video....What's the deal with kde phonon? I thought it was supposed to be the new global sound system for kde4, like arts was for kde3
View 1 Replies
View Related
Oct 22, 2010
After updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Mar 15, 2010
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
View 5 Replies
View Related
May 11, 2010
How should I go about installing alsa and making it start on boot?
View 14 Replies
View Related
Dec 29, 2010
I am having problems getting sound to work. I have pasted my output from AlsaInfo.sh in hopes that someone can assist me. I have been able to fix this with the AlsaCompile scripts for Ubuntu. I am wondering if this is a distro related issue. If not I will gladly send to the alsa project.
[url]
- One sidenote that I will mention is the fact that I DO HEAR SOUND from the following command (and only this command)
Code:
View 5 Replies
View Related
Mar 16, 2011
I am using linux mint 9 with kernel 2.6.32.29. I upgraded from alsa 1.0.23 to 1.0.24 using the alsa upgrade script. Sound was working just fine before on my Asus Xonar DS, However, my nvidia geforce 430's hdmi audio card is not recognized in 1.0.23 but it is in 1.0.24. Though the card is detected, I have no sound on either cards now.
View 2 Replies
View Related
Jun 18, 2010
I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
View 1 Replies
View Related
Nov 15, 2015
So I've got a new system on which I had to re-install Debian, and I've been trying to fix the sound today, but it doesn't seem to work... I've kept the same ALSA configuration (except a minor adjustment to the card number as this system appears to have two cards instead of one), but it doesn't seem to work as expected. I got this weird error while running an app that uses ALSA:
Code: Select allALSA sound driver initializing...
ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
--> (Device: default)...Failed: Operation not permitted
In VLC it works fine, provided that I manually choose the right device under Audio -> Audio Device.here's my /etc/asound.conf:
Code: Select alldefaults.ctl.card 1
pcm.dsp {
type plug
slave.pcm "dmix"
[code]....
View 12 Replies
View Related
Sep 11, 2010
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
View 1 Replies
View Related
Mar 7, 2010
For some reason my sound stops working in KDE4. I can't trace it to any particular event, it seems to happen randomly. I think the problem started when I tried installing ktts (the text to speech engine) but I cannot be sure. I've now removed ktts but my problem persists.The strange thing is that if I go to the sound configuration in yast and play the test sound it works fine. But if I try play the test sound in multimedia settings from within systemsettings then I get an error saying "The audio playback device HDA Intel (AD198x Analog) does not work." Also that error message window is titled phonon.
I didn't install phonon but notice that it's installed. I assume it was installed with the default install because trying to remove it brings up over a 100 dependencies.The left speaker / right speak test from the konsole works but only as su and not as me. I get permission errors. Is that normal?
Code:
speaker-test -c2 -l5 -twav
speaker-test 1.0.21
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
[code]....
I also notice that sometimes when I boot up, after I login at the graphic login screen it kicks me out to the command prompt asking me to log in again. When I log in and "startx" KDE starts up but without sound and no kmix. Trying to start kmix manually doesn't start it. I just get an empty window.Again the sound works from the yast sound test.I've tried removing the kmix config files from /.kde4/config/ but that doesn't help. The logs don't show anything obvious to me and the problem appears to occur randomly in so much I haven't been able to figure out what triggers it yet.I also noticed during a session that I have this sound problem and after I've fixed it by resetting the sound card in yast that kde doesn't shutdown when trying to shut the laptop down.
I get the kde logging off chime but the desktop remains and is fully functional. After that any attempt to log-off or shutdowm is ignored. I'm forced to run the shutdown command from the konsole to shut the laptop down. I'm not sure how it's related but it only happens after the sound problem occurs. I'm using KDE4.4.1 but this started in KDE4.4.0 so the update didn't help any. When I upgraded to KDE4.4.0 I started with a fresh .kde4 directory.
View 9 Replies
View Related
Dec 2, 2009
1. I run Suse 11.2 with two sound cards , one HDA comes with motherboard and second is USB, which I use for skype and talking. In YAST everything is fine the motherboard card is marked as prime card and the usb card is marked as second. But often when I log in alsa decides that second card is main and I have to pull out the USB card, run command "rcalsasound restart" and put the USB back afterward. It is a way that to be fixed in the way that alsa remember my choices forever. 2. The other problem is that from time to time the sound suddenly dies and I have to bring it up with rcalsasound restart again.
But I have to admit that their significant improvement with managing sound with PulseAudio.
View 6 Replies
View Related
Mar 17, 2011
I've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
View 9 Replies
View Related
Aug 24, 2010
I have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies
View Related
Sep 12, 2010
Initially the sound was working fine in my ubuntu 10.04 lucid. Headphone jack was not working. I downloaded and installed following packages in order to upgrade alsa.
alsa-driver-1.0.15rc3.tar.bz2
alsa-firmware-1.0.15rc1.tar.bz2
alsa-lib-1.0.15rc3.tar.bz2
alsa-utils-1.0.15rc1.tar.bz2
Now there is no sound. Whole system is fried. I don't know what happened.
View 3 Replies
View Related
Oct 1, 2010
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
View 2 Replies
View Related
Nov 5, 2010
I was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies
View Related
Nov 16, 2010
just used the alsa upgrade script in 10.10 under headers 2.6.35-22 and after a reboot i have no sound. no mixer detects any devices.
View 4 Replies
View Related
Mar 1, 2011
I have an old Aureal Vortex 2 (by Diamond Multimedia) installed in my system (C2Q @3.4GHz, P35 motherboard), along with the on-board audio. I'm using my PCI sound card with my headphones and running everything else off of the onboard audio. Since it seems to have better sound, I would use it a lot more, but it skips like crazy whenever I try to play sound through ALSA. It sounds like something is sporadically dropping audio frames. The onboard audio works fine with ALSA.
I'm running Kubuntu 10.10 (2.6.35-25, gcc 4.4.5). I think it worked fine with earlier software, but I can't remember for sure. I've tried mplayer and kaffeine (xine backend). When using mplayer, the experimental openal works perfectly, but the advanced options for kaffeine are pitiful. I'm looking at switching video players (probably xbmc or a frontend for mplayer), but I assume I won't be able to completely avoid ALSA. I've done a quick search on google, but if there was anything useful, it was choked out by decade old discussions on getting the card to work at all.
View 2 Replies
View Related
May 10, 2010
trying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
View 5 Replies
View Related
Jun 16, 2011
My sound stopped working.
Code:
$ aplay -l
aplay: device_list:240: no soundcards found...
But:
Code:
$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
Home directory /home/georgii not ours.
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Same with alsamixer:
Code:
$ alsamixer
cannot open mixer: No such file or directory
But:
$ sudo !!
shows me the mixer.
Anyway, the sound is just gone. When I do: .....
It says: "PulseAudio seems to have crashed. Do you wish to report a bug?", then crashes.
View 1 Replies
View Related
May 13, 2011
Alsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?
View 8 Replies
View Related
Dec 17, 2010
In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?
Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.
View 11 Replies
View Related
May 29, 2011
I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
View 4 Replies
View Related
Jul 11, 2015
I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...
Always when I run tvtime it sends me:
"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
mixer: No such mixer channel 'aux', using channel 'line'."
I've got this in the .asoundrc file:
pcm.!dmix {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
channels 6
period_size 1024
[Code] ....
And everything works with sound - but tvtime can't...
View 8 Replies
View Related
Jan 6, 2011
I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.
Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.
lspci shows:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
alsactl init gives:
alsactl: init:1743: No soundcards found...
alsamixer:
cannot open mixer: No such device or address
aplay -l:
aplay: device_list:235: no soundcards found...
View 14 Replies
View Related
Mar 27, 2011
since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected
[Code]...
View 1 Replies
View Related
