Fedora Hardware :: Sound Card Not Recognized ?
Aug 11, 2010
I just closed another issue about an unrecognized USB C-Media headset, because the issue seems to be deeper... On an Asus Eee 1001p running Fedora 13, I've run lspci | grep -c audio, which returns 0.
Running alsa-info.sh --no-upload I get a report that tells me that there are no soundcards... Pulseaudio is running though. Also, if I use VirtualBox the sound works fine there (including my USB headset).
I used to have sound, and I'm not sure how it disappeared. I really don't know where to start with this, it's been a pain in the ass all week.
View 3 Replies
ADVERTISEMENT
Feb 3, 2011
The soundcard was working with the exception of the mic.
So I tried to install linuxant drivers and the installation failed for some reason.
So I uninstalled it. After that my sound card is not being recognized.
Here is the output of the alsa diagnostic script.
Code:
View 9 Replies
View Related
Oct 14, 2014
I've got a problem on my Debian, I've tried installing all the correct alsa packages and all packages that have the word sound or audio description. The problem that is happening here is that when I go into settings and click on sound in Gnome, it appears to have a dummy output and in fact, a few weeks ago, the sound was working properly. Now, I believe, that after an update, the sound card was not recognized. Used the lspci command in root mode, and showed my sound card which is onboard. I'll leave the model below it, because I've tried everything and could not solve anything.
Code: Select allroot@debian:/home/weiller# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
[code]....
View 1 Replies
View Related
Oct 9, 2010
make sound card recognized by alsa?
Code: !!Sound Servers on this system !!
----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
[Code]....
View 1 Replies
View Related
Jul 7, 2010
I have an issue with my Sound on OS 11.2.It is correctly recognized under hardware and the driver seems to start properly as well when I do rcalsasound start.But under Control Center / Sound Preference there is no audio hardware listed (and hene no sound playing)
View 3 Replies
View Related
Feb 11, 2011
Sound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
View 1 Replies
View Related
Jun 2, 2010
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies
View Related
Nov 25, 2009
I have had a Broadcom Corporation BCM4318 since Fedora 10. In addition, both Fedora 10 and 11 wouldn't recognize the card with out third-party drivers. I was pretty excited when I booted the 12 Live CD and it recognized it at boot.
Since this is my lab box I thought its time to give Fedora 12 a try.
I did an DVD upgrade from 11 to 12 and rebooted. The Broadcom came up fine this time. I did a yum upgrade to finish from whatever was not on the DVD and rebooted. This time no 'b43' network card was recognized. I still had my third part driver files so I:
b43-fwcutter -w /lib/firmware/ ./broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o
and a 'modprobe b43' and I had my card back.
I am sorry for dragging this out this far, but now every time the Fedora 12 box reboots I have to type in modprobe b43 to get my card to work. I did not have to do this for neither Fedora 10 nor 11.
I put a line in /etc/modprobe.conf - 'alias wlan0 b43' but I still don't get my wireless card until I type modprobe b43.
url
View 8 Replies
View Related
Aug 6, 2011
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
View 3 Replies
View Related
Dec 30, 2009
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
View 14 Replies
View Related
Jun 12, 2010
My PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
[Code].....
View 1 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Jan 14, 2011
if so I shall have to abandon it again. I have a Motherboard Gigabyte GA-MA74GM-S2, which has an integral sound card. I can't put another sound card in as I have no spare slots.
View 3 Replies
View Related
Mar 24, 2010
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
View 7 Replies
View Related
Dec 9, 2010
I've followed the steps outlined in the Fedora FAQ regarding sound issues. I am attempting to play some MP3 files using RhythmBox, and there's no sound. I have dug a bit deeper. I've tried alsamixer, and when I press F6 (Select Sound Card), I see three entries:
- (default)
0 HDA Intel
1 HDA NVidia
I have tried selecting a different sound card. When I select 1, I see this text: "This sound device does not have any controls". I have an NVidia GeForce 480 video card, but it has been suggested to me that I don't want to use it for sound. My speakers are in my monitor. I would assume that has ramifications on how I set things up for sound within Fedora. I have used some kind of sound test utility by executing this at the command prompt:
"speaker-test -c 2 -t wav".
I hear nothing. I don't know what to do next. If anyone can IM with me using Pidgin, that would be perfect
View 3 Replies
View Related
Jul 28, 2009
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies
View Related
Sep 11, 2010
My sound card isn't being found on F13, it's a VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60). I ran alsa-info and posted it to the following url:
[URL]
I've had these problems before intermittently and it was working until I rebooted recently. I've also attached my yum log if there was something updated that affected it.
View 1 Replies
View Related
Jul 18, 2010
everytime i use alsamixer command i get only the "Master" volume control, and i see the card its using is "Pulseaudio" so i press f6 to select the sound card and i found that i have "default" and "HDA SIS966" so i wanted to know how can i change that "default" to the HDA SIS966?.i tried pressing f6 and selecting the card but when i close alsamixer and run it again i get the "default" sound card again.
i left some pics, the 1st one is what i get when i run alsamixer, the 2nd is the options i got when i try to change the sound card, and the third is what i get with the card HDA SIS966 which is the one i'm trying to get as my default.
View 4 Replies
View Related
Sep 30, 2009
My wife is reluctant to move from WinXP so I started my own personal campain to promote fedora at home but my wife complains that I "spend too much time fidling with the thing(PC)" and that "it wasn't the case with WinXP" so I =was looking for ways to impress my wife with fedora's capabilities so I flashed her with compiz and dual screen using our old 52" projection tv as a DVR but rhe problem is that my daughter want to watch her DVDs and my wife want to watch a ..... video.I have a system with two Sound card one embedded on the main board and one on a PCI slot and what I am trying to achive is haveing two applications, like two instances of VLC play their sound on the souncard I select per instance, or one Sound card playing VLC and the other playing a ..... video's sound.
I have looked at pulse audio properties and it detects both of my sound cards just fine and it plays wonderfully on either but that is just it... it will pay on either but not both.I have read that you can configure pulse audio to use your second sound card as sorround or duplicate audio but the idea is dicrete audio from dicrete application. Is there such an use case already supported by pulseaudio?So there might be a solution if I disable Pulse Audio but I rather not but I'm open to either.
View 1 Replies
View Related
Jan 7, 2010
I can not set default sound card for alsa. It detects my sound card and I can play audio with xmms when I config that to use alsa and my intel sound card, but other applications which use default alsa sound card, and also pulse audio, can not play any sound.
View 2 Replies
View Related
Mar 24, 2010
I have a Dell PowerEdge 840 that has no sound card. I would like to install a completely compatible sound card. I have not been able to find any recommendations for compatible sound cards on these forums, but I have learned that the C-Media chipset is supposed to be well-supported by Linux. There are C-Media sound cards on e-bay for under $10. I was considering a 6ch c-media 5.1 surround sound 3D PCI sound card. I believe the chipset is CM8738. Does anyone know whether this card is supported in F12? Or does anyone care to share any recommendations for sound cards that are known to be compatible with Fedora 12?
My intention is to be able to install a decent, inexpensive, commodity sound card that is known to be compatible with Fedora 12. I would prefer to purchase and install one that I know works rather than guessing and then fiddling with it forever and asking a lot of questions that could have been avoided.
Surprisingly, this information has been very hard for me to find. I understand that there is no Fedora hardware compatibility list, but it seems that a very brief list of hardware that is know to be compatible with the most recent release or two of Fedora could save a lot of time and resources. The purpose of such a brief list wouldn't necessarily be to see if a certain piece of hardware is compatible, but to find a component that is know to be compatible, so as to easily be able to get a completely functional system up and running.
View 5 Replies
View Related
Jun 5, 2010
Fedora-13 will not play sound. It's definitely a kernel issue and I am not the only one from what I read elsewhere. Prior to kernel 2.6.28 audio works on this Samsung Q1 Tablet PC. Any kernels from 2.6.28 onwards will not recognize my sound card and therefore won't play sound no matter what. I've proved it running different livecds (Suse, Mandriva, PCLOS, etc.) with kernels 2.6.25, 2.6.27, etc., all with audio. How can I use/import a suitable kernel for Fedora-13 so that it will recognize my sound card (driver snd-hda-intel) on this Q1?
View 2 Replies
View Related
Jan 20, 2011
With my Compaq CQ62 it seems I can either have a distro provide a working wifi or a working soundcard but not both. I would love to have Linux working properly. Wireless internet works great in Windows 7. The ethernet works perfectly when I plug directly into my router, but pressing the wireless button will not change the light on it from orange to white or do anything else. Yet a simple distro like crunchbang or kubuntu seems to make the wireless work fine.
They just cant make my soundcard work. Being that there is at least some sort of a protocol for installing wireless drivers, I figured I would go with the distro that gives me SOUND since installing a sound driver seems unheard of or impossible. I have a realtek wireless network card in my laptop that Fedora, one of the biggest names in Linux, seems oblivious to even recognize. When I click on the network icon and go to Manage Connections, the Wireless tab is greyed out and cannot be clicked on.
View 14 Replies
View Related
Apr 14, 2011
I know I can use alsamixer in a terminal to adjust the sound for various input/outputs. But when I launch the alsamixergui, I only get Master Volume for Pulse Audio, which does me no good (Experienced the audio bug described in this ..... video [URL] how can I change the sound card in the Gui Mixer (S and F6 does nothing).
View 1 Replies
View Related
Jan 27, 2010
I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 Replies
View Related
Mar 7, 2009
i have a creative sound card installed in my system. But it is not working. What I got is a mono sound output. I also check pulse audio volume control but only mono sound it displayed in the play back tab. i checked sound & volume control in
system-> preferences -> hardware ->sound
system-> preferences -> hardware ->volume control
But no avail it can only play analog front speaker, neither IEC958 centre nor left/right speakers.Actually in this,(F-10) there is no options to check a 5.1 surround sound(which is available in windows explicitly). Can anyone please help me to configure the sound card for a 5.1 surround system?
View 1 Replies
View Related
Apr 30, 2010
I have a PC with Fedora Core 5, and only command line available for this PC. I try to use the ALSA sample program to playback a simple sine wave, and I can't get any sound from the audio out. I suspect that the sound card is set as mute. My question is how to unmute the sound card, which is integrated with the VIA82xx mother board.The following is some of the info about the PC and sound card.
Code:
[root@mu153097 cards]# lsmod | grep snd
snd_via82xx 20316 0
[code]...
View 2 Replies
View Related
Nov 23, 2009
why my sd card is not recognised (not mounted) when I insert it into the sd card slot...neither if it is already inserted at bootup nor if it is inserted afterwards? I am running Opensuse 11.2 (with KDE4), and I have no reason to suspect the hardware (yet), since it was OK recently with OS 11.1.
[code]....
View 6 Replies
View Related
Apr 9, 2010
I am very new to Linux. I installed ubuntu 9.10 on my Acer 3050 aspire. It works very well except for a few issues. I can not use my 5 in 1 card reader, nothing shows up in "computer" except "cd/dvd" and "file system". My lg phone does not show up when using my data cable as mass storage, and the touch pad is too sensitive, (i have adjusted the settings listed under mouse/touchpad but to no avail. The biggest problems is the card reader and phone. Can this be fixed?
View 14 Replies
View Related
Mar 3, 2011
I have a Mini-ITX VIA EPIA LT series motherboard running Slackware 13.1
Graphics card is not recognized properly.
But the graphics is OK the first half of the boot, then it turns weird and stays that way.
The screen is very dark, tux in the upperhand left corner is colored wrong. (Red, Purple, Green)
I did a Xorg -configure, and this is the content of xorg.conf.new:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 14 Replies
View Related
