I plug the USB receiver in, but I get no control over the pointer.me to get this mouse to work in Fedora.
Code:
/var/log/messages
Feb 16 09:31:32 spectre kernel: [ 327.500194] usb 6-2: USB disconnect, address 2
[code]...
Initially it was working fine after fedora 15 install.However recently it simply stops responding after a period of time.After reboot, sometimes it does repair itself but again stops working after some time.I'm not aware of any package updateperformed or configuration change that would have impacted it.And it does work intermittently as mentioned above
View 2 Replies View RelatedThe wheel is acting as a middle mouse button and clicking. But the scroll is not working
View 3 Replies View RelatedEvery single thing is working just AMAZINGJust the mouse scroll is not working at all
View 7 Replies View RelatedAlright, on my desktops I have always used a Microsoft basic USB optical mouse, as well as on my laptop. I recently bought a pack of three keyboards and three mice, and Squeeze hates the mice. Below is the connection output from both mice. The new mice will work for about a minute, disconnect, then reconnect. The older v1.10 mouse works flawlessly.
New Mouse:
[ 2852.268048] usb 2-1: new low speed USB device using ohci_hcd and address 4
[ 2852.476163] usb 2-1: New USB device found, idVendor=045e, idProduct=0084
[code]....
I am trying to use my Microsoft Optical Wheel Mouse (it has left button, right button and the wheel button) in Ubuntu 9.04.I would like to use the wheel button to perform the same task as backspace key in firefox browser and file browser. I have hunted around the net for the past two weeks and found many articles on imwheel and editing x11config files but they all are for 5 of 7 button mice. I have installed and used imwheel -c which tells me that it is "wheel: Left Button 6". However as a total beginner with Linux I am not sure what to do from here. I am hoping that someone would be kind enough to give me a reasonably detailed explanation of what I need to do. If someone could spend some time to list what files I need to edit and what I need to insert into them for this mouse I would be grateful.
View 3 Replies View RelatedI have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies View Relatedwhen I first instaled Ubuntu on my computer my wireless mouse was working fine but today it just automaticall stopped working. the terminal command output for "lsusb" returned
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
My wireless mouse stopped working about a week after i bought it. i replaced the batteries, and tried restarting my computer. I also tried putting the receiver in all of the other usb ports, to no avail. Where is the driver software that was installed when the receiver was plugged in located on my computer? I plan to un-install this and hope that it works when it is installed again.
View 1 Replies View RelatedLooking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies View RelatedI dont know when k3b stopped working but have just gone to burn a disk and when opening it tells me
Quote: No optical drive found. K3b did not find any optical device in your system. Solution: Make sure HAL daemon is running, it is used by K3b for finding devices.
I can boot from cd and can mount cds from within Slackware but for some reason k3b insists that i don't have a drive.
I have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
I've troubles with wireless keyboard and mouse on openSuse 11.3, XFCE. The keyboard is A4tech GL100 and mouse A4tech G7-630 working on 2.4 GHz. The mouse after few seconds of inactivity switches off and I have to click to bring it working again. The keyboard is set to CZ, but always after start automatically switched on ENG, I have to go to Yast and open keyboard setup and close even if the CZ is selected to force the CZ layout.
View 1 Replies View RelatedI have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[ 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
I use a Kensington Wireless Netbook Mouse.It has worked well in Ubuntu 9.10 and 10.04.For some reason in 10.10 it works, but every now and again it sticks for a second or two. Sometimes the left button stops working.If I pull out the dongle for the mouse and put it back in my mouse works fine.
View 3 Replies View RelatedI currently have the following:-
Optical Out from my TV into the SPDIF / Optical In on my PC
Optical Out from my PC into my Sony 5.1 Theatre Kit
The audio from the PC comes through ok when listening to music and movies. But unfortunately I can figure out how to enable the audio passthrough from my Tv so that the audio comes out of my theatre kit. In Sound Preferences, the hardware is set to 1 Output / 1 Input [Digital Stereo (IEC95 Output + Digital Stereo (IEC95 Input]. When I click on the audio tab, the Input Volume is at 100% and the Input Level is moving in conjunction with the audio coming from the Tv.
I saw it mentioned in another thread to install Gnome Alsa Mixer which I've done, it seeems to identify the audio chipset as Realtek ALC882, the motherboard is an Abit AB9 Pro. Hopefully I'm missing some config somewhere or there a box I should be ticking but I just can't find it.
I migrated to 10.04 (clean install) from 9.10 recently. I have no problems with internal sound card playback but cannot get the USB Creative Audigy Optical port working. I have defined it as Digital Output in Pulse Audio and when an application plays audio I can see Pulse Audio showing output but no output from the Audigy.
I would appreciate if anyone has come across this problem and if so could give some pointers to fix this issue.
I am using fedora 14. Previously my mouse pad was working fine, but I don't why it stopped working now.This happens only in gnome desktop as a root user, it is fine in other users. Also mouse is working fine in console as a root user. When I enter to gnome, mouse stop working.I guess my query is clear, if not please ask what was unclear
View 1 Replies View RelatedI'm currently running Fedora 14 on an ASUS laptop and I'm looking for a recommended Wireless Keyboard and Mouse.
View 3 Replies View RelatedI'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
i'm using fedora 12 on my new EASYNOTE_TJ65-DM-139IT [URL]... from time to time (about one time a day) computer freeze, i cannot use my keyboard, mouse still work (that is: i can move the pointer on the screen) but click on opened windows, button, menu doesn't do nothing. I can't understand what's the problem and how to solve it, all i can do is hardware turn off the computer and reload fedora. This is quite disappointing, hw power off it every day can harm my notebook.
View 5 Replies View Relatedafter installing the OS my mouse was not working. After searching in net for a day, I made it working. Shall give the details hereIf its a repeat thread please ignore it.1. Go to Terminal.2. Login as root.3. su -c 'yum install -y system-config-display'This step will take some 2 to 5 mins 4. su -c 'system-config-display --reconfig'After Fedora 9/10, the xorg.conf is not available and it uses HAL to detect the hardwares. The above steps create the config file.
5. su -c 'cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak'
back up
6. su - -c 'gedit /etc/X11/xorg.conf'
[code]....
My USB mouse stops working sometimes after 5 mins, sometimes 30 mins. Used two different '"corded" USB mice, different USB ports. Same issue. The power to the mouse itself seems to turn off as the laser light is off. Unplugging and replacing does not fix, only a reboot. Same problem with Ubuntu and Mint.
View 1 Replies View RelatedI have a PDSI TS230 server running redhat. I inadvertantly unplugged the mouse cable from the back. When I re insert it, the mouse not longer works. It looks like the system does not detect it anymore. Does anyone know how I can get the system to notice the mouse without rebooting the entire system?
View 6 Replies View RelatedI have Fedora 11 installed on my HP Pavilion dv6000 laptop, and have been using the installation for many months. Just this past couple of days, the 'right-click' on the mouse (whether using the trackpad mouse on the latop or an external mouse) has stopped working, but not completely. I can still right-click in firefox, on the bar at the top of screen, in a terminal window, etc. However, right-click is not working on the desktop, that is I can not right-click on a folder or a file. Nothing happens. If I right-click on the trash-can, nothing. So I know the mouse buttons are fine as right-click does work in firefox.
> uname -r
2.6.30.10-105.2.23.fc11.i686.PAE
I have a Dell Inspiron 1501 recently converted to run Fedora 13. Everything seems fine except the touchpad mouse doesn't work outside the X-Window. When I boot to full multi-user mode, the mouse doesn't work at all. I think this is responsible for the typical UNIX copy & paste by selecting and right clicking not to work within GUI. Here's the output of
[Code].....
I installed Fedora 11 on an external usb HDD (StoreJet trascend) connected to my Acer AspireOne (110 L), and it has been working marvelous for over a month. Today, something really strange happened: After I choose the booting media (StoreJet trascend) Fedora 11 freezes on the loggin screen: Both, keyboard and mouse, stop working. I have no idea what services are shoot down or not recognized since the start screen starts with the blue and fedora logo one.
View 5 Replies View RelatedAfter upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
Wondering if USB devices such as a wireless mouse suppose to automatically be detected by F11. I tried plugging my wireless mouse in to my F11 laptop and its not working..I'm I suppose to do something to get it to recongize it? Do I have to but my laptop with the mouse receiver plugged in for Linux to recongize the device.is Linux capable of true plug n' play?
View 2 Replies View RelatedI'm running Fedora 12 on a Shuttle SN78SH7. Updates are all current from the Fedora repositories. I'm using the Nouveau driver for the Shuttle's on-board Nvidia graphics adapter. At random intervals (1 to 5 times per day), my USB keyboard and the buttons on my USB mouse stop working and the desktop freezes (i.e. GKrellm graphical data stops updating, partially painted windows don't complete). However, I can still move the mouse pointer around the desktop. This only seems to happen when I am actually using the computer from the console. It has never happened while the system was turned on, but not being used.
When the mouse and keyboard stop working, I can log in from another computer via ssh. Once the computer gets in this state, the only way to fix things is either to reboot remotely using ssh or to cycle power. I've run low level hardware diagnostics - everything checks out OK. This computer only has USB and firewire inputs. No PS2 jacks.
