when I first instaled Ubuntu on my computer my wireless mouse was working fine but today it just automaticall stopped working. the terminal command output for "lsusb" returned
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
My wireless mouse stopped working about a week after i bought it. i replaced the batteries, and tried restarting my computer. I also tried putting the receiver in all of the other usb ports, to no avail. Where is the driver software that was installed when the receiver was plugged in located on my computer? I plan to un-install this and hope that it works when it is installed again.
View 1 Replies View RelatedLooking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies View RelatedInitially it was working fine after fedora 15 install.However recently it simply stops responding after a period of time.After reboot, sometimes it does repair itself but again stops working after some time.I'm not aware of any package updateperformed or configuration change that would have impacted it.And it does work intermittently as mentioned above
View 2 Replies View RelatedThe wheel is acting as a middle mouse button and clicking. But the scroll is not working
View 3 Replies View RelatedI plug the USB receiver in, but I get no control over the pointer.me to get this mouse to work in Fedora.
Code:
/var/log/messages
Feb 16 09:31:32 spectre kernel: [ 327.500194] usb 6-2: USB disconnect, address 2
[code]...
I use a Kensington Wireless Netbook Mouse.It has worked well in Ubuntu 9.10 and 10.04.For some reason in 10.10 it works, but every now and again it sticks for a second or two. Sometimes the left button stops working.If I pull out the dongle for the mouse and put it back in my mouse works fine.
View 3 Replies View RelatedI have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
I've troubles with wireless keyboard and mouse on openSuse 11.3, XFCE. The keyboard is A4tech GL100 and mouse A4tech G7-630 working on 2.4 GHz. The mouse after few seconds of inactivity switches off and I have to click to bring it working again. The keyboard is set to CZ, but always after start automatically switched on ENG, I have to go to Yast and open keyboard setup and close even if the CZ is selected to force the CZ layout.
View 1 Replies View RelatedI have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[ 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
Every single thing is working just AMAZINGJust the mouse scroll is not working at all
View 7 Replies View RelatedI have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies View RelatedI have an asus 1215b laptop. For some reason, when I plug my mouse into any of the USB 2.0 ports it doesnt work. However, these same ports work perfectly to coppy files onto pendrives or external hdd. However, the USB 3.0 works perfectly for everything. The last thing I expected was the newer 3.0 to work and not the older 2.0. btw, my mouse is a generic, brandless laser mouse (it is an inhouse brand of PC CITY stores: PC LINE). I have never had any problems with it before.
View 1 Replies View RelatedI m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies View RelatedI just installed ubuntu on PS3 and my wireless mouse will not work, I have 2 sets of keyboard mouse combos and both the mouses wont work on the ps3 but will on the desktop. Is there a way I can get my mouse to work?? I have a usb mouse that works but Its a pain to use and I cant sit right away from the tv.
View 2 Replies View RelatedMy mouse isn't working when I plug it in, it's a USB Logitech Wireless Mouse and it doesn't work unless I boot with it plugged in then it stops working eventually.
View 7 Replies View Relatedi got a razer diamondback 3G and button 1,2,3+weel up/down works.. but the button 4 (previous) not.
instead the button 5 (next) do previous, and button 4 don't work.
i tried modify xorg.conf but do nothing..
PS/2 mouse is not working on my newly installed Ubuntu (ver:9.04).
View 4 Replies View Related(experienced in 9.XX and 10.04) Some of the time ubuntu works properley, but when i open a few windows the mouse and keyboard work fine to selected things except for the left and right buttons on the mouse...
View 4 Replies View RelatedI have read no fixes anywhere, oddly. This problem happened in 9.10 and seems to be back in 10.04. The fix on Ubuntu-Geek, which was re-posted various places, does not work either. However, I do know this is not a hardware issue... or think. I have a dual-boot with Windows 7 and it is not affected by this. Also, if I install anything 9.04 or earlier, this does not happen. Oddly, my netbook had 9.10 and now 10.04 but not this issue. Sadly I feel I must try other distros as this appears to be a Ubuntu specific error.
View 9 Replies View RelatedI've been facing this problem since months before I decided to find an answer. I downloaded a cursor theme from gnome-look.org and then installed it by dragging the tarball to the themes window. It said theme is installed. But the effects are not visible yet. I then shoot up firefox to see the new pointer working but not outside firefox. I even noticed the new pointer theme works in nautilus for all except pointing (it works while resizing, selecting text, loading but not the regular pointing).
I searched the forums and found a similar problem: [URL]
the solution doesn't work because there is no "cursor theme" option in ccsm. i've attached a screenshot too.
Is it a bug? do i need to disable compiz to "have my own desktop"? Is there a solution?
2day morning itself i m downloaded 10.04.1 (32-bit Desktop) and when trying to install first it was stopped at timezone selection phase and no reaction Forward button disabled (at this time keyboard and mouse r worked) after words when i m trying to install again keyboard and mouse r struck. Same thing happed when i trying to install 10.04 version.
View 2 Replies View Relatedi have installed ubuntu 9.01 in my i3 processor system without any partition.i hope its installed properly.now when i try to boot it.It show me the main screen with main menu bar,but cursor is struck up.i can not move the cursor.i have installed ubuntu thrice but the same problem continues
View 1 Replies View RelatedSo my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code:
[ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.840] (II) No input driver/identifier specified (ignoring)
[code]....
i just installed ubuntu through windows installer, the problem is that some times my mouse stop working i cannot click any where but i can open some stuff with my keyboard . when i open my browser with keyboard my mouse starts working , but still cant click on the top menus like volume , mails , or shutdown restart etc ... but when i right click on an empty page of the browser again my mouse stops working ... right know i am only working with keyboar
View 1 Replies View Relatedi just installed ubuntu through windows installer , the problem is that some times my mouse stop working i cannot click any where but i can open some stuff with my keyboard . when i open my browser with keyboard my mouse starts working , but still cant click on the top menus like volume , mails , or shutdown restart etc ... but when i right click on an empty page of the browser again my mouse stops working right know i am only working with keyboard
View 5 Replies View RelatedI'm brand new to Ubuntu (or any flavor of Unix/Linux, for that matter). I installed it (9.10) into a VM in Hyper-V with aplomb. However, the mouse isn't working, so I'm getting good at using the keyboard shortcuts right off the bat.Anyhoo, I'd like to get the mouse working. I downloaded Hyper-V for Linux 1.0 (integration components), but I can't seem to get it installed. I attach to the ISO from my VM and the CD shows up in Ubuntu, but then what? I tried running the setup.pl file, but nothing seemed to happen and my mouse still isn't working.
View 4 Replies View RelatedI am running 9.10 (Karmic) on a Compaq Presario CQ60 laptop with Nvidia graphics. I have installed the -185 driver which has solved most problems. However every so often the system seems to lose track of the mouse button state. The first symptom of this is that all mouse movements on text are treated as if the left button is being held down: mouse movement selects text rather than just moving the graphics cursor. I am using a M$ optical mouse.
I have tried:unplugging and replugging the mouse using Ctl-Alt-F1 to go into a console and Ctl-Alt-F7 to go back to the GUI I am able to shut down all of the open windows normally using the keyboard, but the only way I have so far found to get the GUI working again is to reboot the system.
I just installed Ubuntu 9.10 on a dell d630 laptop and tried to connect an external ps2 keyboard and mouse using USB connectors to the laptop's USB ports. However, they are not detected by the system.
View 2 Replies View Related