OpenSUSE Hardware :: Wireless Keyboard And Mouse Not Working Properly
Sep 13, 2010
I've troubles with wireless keyboard and mouse on openSuse 11.3, XFCE. The keyboard is A4tech GL100 and mouse A4tech G7-630 working on 2.4 GHz. The mouse after few seconds of inactivity switches off and I have to click to bring it working again. The keyboard is set to CZ, but always after start automatically switched on ENG, I have to go to Yast and open keyboard setup and close even if the CZ is selected to force the CZ layout.
View 1 Replies
ADVERTISEMENT
Oct 20, 2010
Looking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies
View Related
Nov 19, 2009
I have a strange keyboard problem. If I enable keyboard repeat from system settings, every key press gets repeated no matter how fast I press the key. For example if I try to type the letter 'a' I get 'aaaaaaaaaaa'. Or if I type 'mouse' I get 'mouseeeeeeeeeeee'. I've tried different delay and rate options but that doesn't change the problem. If I disable keyboard repeat I can type normally, but it's very annoying when you can't for example delete characters quickly.
View 5 Replies
View Related
Jan 6, 2010
I'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
View 2 Replies
View Related
Jul 14, 2010
Was running out of room on / and set in Yast to delete /tmp on startup. Also deleted /var/log and /var/tmp while logged in. Rebooted and now mouse and keyboard (both USB) not working. Keyboard works on grub menu. Also works now in XP. Tried reconnecting (sync & plug unplug) different usb ports and nothing. Gave it a few minutes on startup and still nothing. Plugged in a PS2 keyboard and the lights just blink after startup and it will not work either.
View 7 Replies
View Related
Jan 16, 2010
I have a new system with Asus M3A78-EM mobo, 4 GB RAM, AMD Phenom II quad-core 955 3.2 GHz CPU, on which I've installed the 64-bit version of openSUSE 11.2. It's a lightweight server as well as a desktop machine, and is on 24/7 (and on a UPS). The problem is that the system reboots itself spontaneously, on average a couple of times a day, at seemingly random times. After one of these reboots, an examination of the system log shows nothing at all suspicious logged in the minutes prior to the sudden reboot. Sometimes the system recovers after the reboot, but about half the time the KDE4 desktop comes up with the keyboard and mouse not working. The system log in that case shows that the USB subsystem is wedged, with the message "task khubd:38 blocked for more than 120 seconds", followed by a series of call traces. At that point, I can usually log in via SSH from another local machine and execute a shutdown/reboot, and the system usually recovers fully after that... until the next spontaneous reboot. The only thing unusual about my USB setup is that I have a Hauppauge HVR-1950 TV tuner plugged in, and the pvrusb2 driver installed on the system.
The mobo has an onboard ATI Radeon HD 3200 graphic controller, and I installed the proprietory ATI driver for it in the hopes of improving system stability. It didn't.
Due to the lack of syslog warnings before one of these reboot events, I was inclined to think the hardware was at fault, and my first thought was bad memory. However, fairly extensive testing with memtest86+ showed no errors. Of course, it could be other more obscure hardware problems, but it would be nice to be a little more certain before I resort to replacing the motherboard or the whole system.
Other info... booting in failsafe mode doesn't seem to cure the problem. Setting acpi=off in the boot menu doesn't seem to help either. There are some suspicious things in the boot log, though, such as:
My system does not have ECC memory, so it is indeed properly disabled in my BIOS. Again, I see discussions of this bug(?) on the net, but little indication of whether it is anything serious.
At this point, I'm running out of ideas... I'm still not sure whether the hardware or openSUSE 11.2 are at fault, and I don't want to give up on either prematurely.
View 9 Replies
View Related
Jan 30, 2010
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
View 5 Replies
View Related
Jan 12, 2011
A wifi card with the ath5k driver used to work properly until a couple of weeks ago. Now, if I ping the router the response times sometimes are okay but often fluctuate into the range of many hundreds or thousands of milliseconds. Occasionally the connection breaks down entirely.My laptop, which uses a different card, works fine (typical ping response times of 2 ms), so its probably not the router which is faulty.I use opensuse 11.3 x86_64, currently with the 2.6.34.7-0.7 desktop kernel and knetworkmanager
View 1 Replies
View Related
Mar 2, 2010
I am using ubuntu 9.10 , but while opening eclipse and working with it, i used to face some strange problem which is my mouse does not work properly inside eclipse and these effect the other application and i used to get stuck (the keyboard will be still working) which force me sometimes to kill the whole eclipse (using keyboard)....
View 7 Replies
View Related
Feb 19, 2011
I've recently installed Ubuntu 10.10 and everything worked like a dream the first 10 days. Now I have to restart X to get my keyboard to work like it should. When I start the computer everything is fine until the login prompt where my password contains certain letters that don't work. To fix this I must use ctrl + alt + F1 and then start htop/top to find PID of X and kill it. This fixes the problem temporary but after next reboot I need to the same again...
View 2 Replies
View Related
Aug 1, 2009
I just installed F11 on my new laptop (Acer Timeline 3810T) and I have the following issue when adjusting volume. The keyboard shortcuts work, but they don't raise/lower the volume smoothly, instead they do it in 4 or 5 increments total. What's weird is that the notification that appears in the screen when I adjust the volume (the whitish square with a picture of a speaker, I think it's part of Compiz) shows the the volume changing in small increments, but when I get to the 3rd or 4th little increment from the right the volume is already muted. If I look at the alsa volume controls at the same time, I see it changing by the 4 or 5 big increments.
View 2 Replies
View Related
May 6, 2010
My keboard was working perfectly (backlight, inverse FN) until upgrade from karmic to lucid. Now neither backlight neither inverting FN (in pommed.conf) works- backlight is always off, FN is default OSX-like.
Trackpad worked "almost superb" (missing click with one finger and drag with another!!) but after upgrade (=no mode udev) event number changes with every reboot so I cannot put configuration based on /dev/input/eventX to Xorg.conf. How can I make it have the same number after reboot now?
View 2 Replies
View Related
Feb 3, 2010
I m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies
View Related
Aug 1, 2010
I am running Linux Mint and Windows 7 in a dual-boot.
I'm looking to buy a wireless mouse and keyboard that has a linux driver. Haven't been able to find any.
View 4 Replies
View Related
Oct 9, 2010
So my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
View 7 Replies
View Related
Nov 5, 2010
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code:
[ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.840] (II) No input driver/identifier specified (ignoring)
[code]....
View 7 Replies
View Related
Apr 14, 2011
I'm currently running Fedora 14 on an ASUS laptop and I'm looking for a recommended Wireless Keyboard and Mouse.
View 3 Replies
View Related
Dec 22, 2010
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies
View Related
Jun 11, 2009
I'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
View 14 Replies
View Related
Feb 12, 2010
I just installed Ubuntu 9.10 on a dell d630 laptop and tried to connect an external ps2 keyboard and mouse using USB connectors to the laptop's USB ports. However, they are not detected by the system.
View 2 Replies
View Related
Jun 7, 2010
I was having a problem with the mouse and keyboard randomly failing to work after upgrading to version 10.04. I tried both the 32 and 64 bit versions. The problem went away after I edited the file /etc/default/grub and changed the following line:
from
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noapic nolapic"
If you are unable to open a terminal window, try doing the following
Ctrl+Alt+F1
Log into you account.
sudo nano /etc/default/grub
After saving your changes and exiting nano you can reboot by using the halt command.(FYI Ctrl+Alt+F7 gets you back into X server -- but you need to reboot for the change to take effect) Update: problem recurred. I had to do Ctrl+Alt+F1 to log into a console. I executed 'ps aux | more' to find the PID for X.Using the PID I restart X with 'sudo kill -S SIGTERM <PID>'.Once it started up again it was fine.
View 1 Replies
View Related
Jul 15, 2011
I have an Acer 5102 WLMi laptop from 2005 with Ubuntu 9.10 installed. It has worked fine for years but now when I boot up my mouse and keyboard don't respond leaving me stuck at the login screen. I have tried using a USB mouse without sucess. My USB-powered cooling fan still works in all three USB ports fine. I have tried booting into the LiveCD and got the same results except for the CD auto-logging in. Eht0 still auto-connects to the network fine in the LiveCD. I can't find any wrong except for the keyboard and mouse not responding. My next step is to burn a LiveCD with start-up scripts to enable ssh. Also the touch-pad doesn't respond either
View 4 Replies
View Related
Aug 25, 2009
I am running 8.10 64 bit on my laptop and when making a new user I noticed that on my shell prompt, it said "I have no name!". It was bugging me so I logged out and went to log back in. I got some error saying I was logged in for less than 10 seconds after trying a couple times to login. So I restarted and now my mouse and keyboard don't work!
View 1 Replies
View Related
Jul 18, 2011
I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
View 2 Replies
View Related
Jun 3, 2011
Ive got a ClearCube Blade server installed with a mirrored clone of a Centos 5.4 system. Running X with GNOME. Upon starting the new blade, i find that I am having issues with the keyboard and mouse. When I plug in USB mouse and keyboard directly into the blade they work fine. When I hook the use mouse and board to the cport kvm, I don't even get any power to the devices. If I plug in ps2 mouse and board through the kvm, I get power and can use them in the bios but once Centos starts to load, they go dead. I have changed the kvm 3 times with new kvms, and I spoke with the manufacturer there are no incompatibilities with the hp mouse or keyboard or any reason why the usb ports wouldn't be working on the kvm for the devices.
View 7 Replies
View Related
Aug 27, 2011
I just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies
View Related
Nov 17, 2015
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
View 0 Replies
View Related
May 19, 2010
I have tried Lucid on two computers. Wireless mouse and keyboard are DEAD. Even the server version (before the desktop is installed) ignores them. If I connect a wired mouse or keyboard they both work fine.
View 2 Replies
View Related
Dec 25, 2010
I tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
View 2 Replies
View Related
Aug 22, 2009
I installed Fedora 11 on an external usb HDD (StoreJet trascend) connected to my Acer AspireOne (110 L), and it has been working marvelous for over a month. Today, something really strange happened: After I choose the booting media (StoreJet trascend) Fedora 11 freezes on the loggin screen: Both, keyboard and mouse, stop working. I have no idea what services are shoot down or not recognized since the start screen starts with the blue and fedora logo one.
View 5 Replies
View Related
