Debian Hardware :: Logitech Wireless Mouse Not Working On 64 Bit Jessie
Sep 22, 2013
I have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
View 14 Replies
ADVERTISEMENT
Nov 17, 2015
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
View 0 Replies
View Related
Feb 21, 2011
the Squeeze uprgade I also lost the middle mouse functionaly of my Logitech Marble Mouse. I do not remember how I set it up to be honest. I am not sure if it was by default middle was mouse was "pressing 2 buttons on eachside at the same time" or I did set up manually using Xmod or similar tool. I might have even set up in the hal settings. The reason I do not remember exactly is that I used multiple tuts and places to set this up long time ago and now that the functionality is gone I am kind of confused about how to go ahead about it.
View 1 Replies
View Related
Dec 22, 2010
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies
View Related
Sep 19, 2015
I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.
I have installed the b43 firmware and after that everything seemed working but just for a few seconds.
I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.
I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.
I can easily use my wifi with my smartphone too.
View 1 Replies
View Related
Apr 27, 2010
I just purchased this mouse today. The box brags that one can insert the include AA battery, put the little remote in a USB port, turn the mouse, on, and away you go.
However, it doesn't work. I've gone through the whole troubleshooting guide, which generally consists of silly questions such as "Is the mouse on?"
My previous mouse was a logitech, but it was not wireless. It worked fine. Are there any restricted extras in order to get this beauty up and running? Or should I return it and invest in a more Linux-friendly mouse?
View 1 Replies
View Related
May 2, 2010
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
View 9 Replies
View Related
Aug 5, 2011
I just bought a usb logitech LS1 laser mouse, plugged it in restarted ubuntu 10.10 and its not working.
Where can i change the mouse?
View 1 Replies
View Related
Jan 17, 2010
It works under Windoze but in Linux the integrated mouse doesn't work. Whilst it's forced me to learn some keyboard shortcuts, the mouse would help a lot.
This is my media PC. I run currently run Mandriva 2008 & use Kafiene to watch/record etc TV.
View 5 Replies
View Related
Apr 14, 2010
I have a Logitech VX Revolution, and I would like to change the "search/find" button to be used to middle click as opposed what it currently does, opening a new google tab in firefox. The mouse settings in System Settings does not have a tab for editing what the buttons do. (I thought there should be a Logitech tab, but I guess that is for USB only)
openSUSE 11.2 KDE 4.3.5
View 1 Replies
View Related
Nov 2, 2009
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
View 4 Replies
View Related
Dec 31, 2009
I am trying to get the forward and back buttons on my Logitech Surface mouse working in openSUSE 11.2 running as a guest in VMware Workstation 7 on a Win7 x64 Pro host. I have read many places about editing the xorg.conf file and have done so successfully under Ubuntu in the past. I have successfully installed VMware Tools and everything is working as expected except the side buttons on the mouse. I have no current xorg.conf file
View 5 Replies
View Related
Jan 16, 2016
I'm not having the invisible mouse problem, I don't have a mouse at all. Nothing is selected when I attempt to use my touchpad no matter how much I try. I've been trying to fix this problem for three or four days including by installing alternative OSs (Ubuntu Gnome 15.10, Ubuntu 14.04, Ubuntu 15.10), but those OSs have trouble finding the boot drive and is generally a massive nightmare. I figured Debian's lack of mouse would likely be easier to fix and so here I am. I've searched Google relentlessly for days now, the Man pages are useless for my problem, and the only mouse related posts on the forum didn't fit my own issues.
I'm using a Toshiba Satellite C55D-B5102 AMD-64 with Debian 8.2 (Jessie) and none of the operating options like Cinnamon selected at install.
View 14 Replies
View Related
Sep 30, 2014
I have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[ 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
View 3 Replies
View Related
Jan 7, 2015
I think my USB mouse randomly suspends, at the very least it freezes. It is plugged into a USB switch, I have to either unplug the mouse and plug it back in, or switch it to a different computer for it to come back, sometimes it freezes within seconds again.
How can I resolve this. I looked at [URL] ...., but had problems following the folder hierarchy.
NOTE: laptop-mode-tools, powertop NOT installed.
lsusb reveals:
Code:
Select allBus 003 Device 010: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
[Code] ....
I'm not sure where I can find Bus 003 Device 010 to check 'power/control' for 'auto'.
View 7 Replies
View Related
Apr 24, 2014
I'm using Debian Jessie (64-bit) with XFCE
Code: Select all$ uname -srvmo
Linux 3.12-1-amd64 #1 SMP Debian 3.12.6-2 (2013-12-29) x86_64 GNU/Linux
And my middle button doesn't work anymore. The problem doesn't seem to be configuration-related as xev, xinput test and cat /dev/input/mice show nothing after clicking the middle button.
Here's the output from xinput:
Code: Select all$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
[Code] ....
Could it be a kernel issue?
View 1 Replies
View Related
Mar 28, 2010
I am suffering from the following problem: after updating udev from 125 (lenny) to 151 (squeeze) my wireless keyboard Logitech diNovo Edge totally stopped working (says it is disconnected). If I downgrade back to 125 all works fine again.
View 4 Replies
View Related
Dec 19, 2015
I have a problem with compiling bibliography in Latex running on Debain Jessie. I have even tried to compile the stock example provided by ShareLatex web site, and it still doesn't work.I keep getting same error messages, when I run my own files AND the stock example:
I found no citation commands---while reading file document.aux
I found no ibdata command---while reading file document.aux
I found no ibstyle command---while reading file document.aux
View 1 Replies
View Related
Mar 20, 2015
How to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.
So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.
lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1
[Code] ....
View 4 Replies
View Related
Jul 13, 2010
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies
View Related
May 30, 2014
My wireless connection doesn't work at the Debian jessie installer. This problem appears both on netinst installer and dvd-1. I try to install by USB key. I get message: network key exchange failed. I've tried to disable wifi WPA2, however I can't connect even then. This problem doesn't appear on Debian wheeze installation.
View 8 Replies
View Related
Jul 2, 2015
Dell Vostro 230 with integrated Broadcom NIC.
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake
Supports Wake-on: g
Wake-on: g
A bit of research found the suggestion:
$ lspci -tv | grep -i ether
+-1c.2-[02]----00.0 Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe
$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
P0P2 S4 *disabled
P0P3 S4 *disabled
[Code] ....
How to get wakeonlan working under Jessie with a Broadcom BCM57788?
View 8 Replies
View Related
Jul 4, 2015
I've installed debian stable (Jessie) on an HP probook g2 laptop, but bluetooth isn't working.
Code: Select all/etc/init.d/bluetooth restart
gives in /var/log/syslog:
Code: Select allJul 4 12:02:35 mypc bluetoothd[5043]: Bluetooth management interface 1.6 initialized
Jul 4 12:02:35 mypc bluetoothd[5043]: Sap driver initialization failed.
Jul 4 12:02:35 mypc bluetoothd[5043]: sap-server: Operation not permitted (1)
Jul 4 12:02:35 mypc bluetoothd[5043]: hci0 Load Connection Parameters failed: Unknown Command (0x01)
Jul 4 12:02:35 mypc pulseaudio[1197]: [pulseaudio] bluez4-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.DBus.Error.UnknownMethod: Method "GetProperties" with signature "" on interface "org.bluez.Manager" doesn't exist
View 1 Replies
View Related
Jan 9, 2016
Installed Jessie and added the Nvidia Proprietary drivers. All looks good.
When I open the Gnome Tweak Tool it appears to be working fine but won't change anything. If I click on a check box the check appears for a split second and then disappears. Tried re-starting a few times, same. Haven't found anything relevant on the net yet.
View 2 Replies
View Related
Feb 1, 2016
I have a 'little' problem with my vps, which was working before. Here is what I made:
- order an new IP and I was trying to modify /etc/network/interfaces in order to configure the ip
- even if I was logged as root, I wasn't able to modify 'interfaces' so I tried sudo and alsoto mount (different commands I found.)
- rebooted the VPS
Current situation: I can access ssh, but ispconfig3 and the websites are not working anymore.
View 1 Replies
View Related
May 9, 2015
i can't use imondo restore anymore, due to upgtading to jessie, did aynone get to make it work with jessie. I love to use mondo restore because i can get hots backpus, and i can do partial restore so i can restore my full system preserving home foldest, other way i have to move my home folder, very much waste of time. I cant get installed it but it doesnt open up, it says mondo, mindi bad installed or something like that.
View 1 Replies
View Related
Jun 29, 2015
I installed Jessie (8.1.0) and encountered a problem which is non-existent in Wheezy (7.8.0).
My shell is zsh and I use tmux both installed from packages, I use this zsh feature that when you type "ls /" and then hit "Tab" twice, it will present you a menu where you can select the directory you want navigating the menu with the arrow keys. It works fine out of tmux (in bare shell) but stopped working inside a tmux session. In bare shell you hit Tab twice and get into the menu, in tmux you hit Tab twice and it displays the table of suggestions but just keeps cycling suggestions (cycling directory names) and not sending me to the menu.
Here's some screenshots:
1) Working (no tmux): I hit tab twice and got in the menu.
2) Not working (in tmux): I hit tab twice and it just cycled directory names after "/"
t isn't in my config file, I tried without my .tmux.conf (with tmux set to default settings) and it still had no effect.
View 5 Replies
View Related
Jul 13, 2015
updated my jessie by apt-get dist-upgrade and there was an error said there was something wrong with some database, and I needed to run some command, but after the upgrade I forgot to run the command. After I rebooted my system I found there was not any password needed for a normal user or the root. But if I change to the emergency mode, a root password is needed.
View 4 Replies
View Related
Oct 21, 2015
I installed elog 2.9.2+2014.05.11git44800a72 on my Jessie system. When entering a new post just a simple plain text editing box is shown instead of the WYSIWYG editor, and no drag and drop area for attachments is shown. When I start the elog service with "systemctl start elog" I get this suspect message in the journal: "FCKedit NOT detected".
Indeed, I see that the elog installation creates a symlink which I guess is supposed to point to the fckeditor installation, which nevertheless is missing:
Code: Select allroot@static-3-080:/usr/share/elog/scripts# ll fckeditor
lrwxrwxrwx 1 root root 15 Oct 25 2014 fckeditor -> ../../fckeditor
root@static-3-080:/usr/share/elog/scripts# ll ../../fckeditor
ls: cannot access ../../fckeditor: No such file or directory
I installed ckeditor 4.4.4+dfsg1-3 but his did not fix the problem. I'd say that either the elog package is broken or that it misses a dependency on a package providing FCKedit. Or maybe my system is misconfigured?
View 0 Replies
View Related
Oct 17, 2015
I upgraded from wheezy to jessie, but now I just boot to a console. I've gone through and made sure all packages are up to their latest versions, and I've made sure gnome, xorg, and xserver-xorg are reinstalled (during the upgrade they got uninstalled..).
Here's what happens when I run startx manually:
Code: Select allcharlie@asimov:~$ startx
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[Code] ...
Note also that this whole time, gdm3 has been running:
Code: Select allcharlie@asimov:~$ ps ax | grep gdm3
1058 ? Sl 0:00 /usr/sbin/gdm3
3993 tty2 S+ 0:00 grep gdm3
charlie@asimov:~$ sudo service gdm3 status
[Code] .....
I'm not sure why it prints that it's starting gdm3, but it does that every time I run `sudo service gdm3 status'.
Here's a copy of my /var/log/Xorg.0.log.
View 8 Replies
View Related