Hardware :: Canon MX310 Suitable Driver For Fedora?
Jan 27, 2011
Many have suggested that since Canon does not offer a Linux driver for the MX310, one could use the driver for the MP150. I tried that but found the results very sketchy. After a bit of digging, I found a driver from Canon for the MX340 which works extremely well for the MX310 and allows much better configuration. It wasn't easy to find, so here's the URL in case you want to try for yourself: [URL]
The package (located in the tar file) that worked for me is cnijfilter-mx340series-3.30-1-i386-rpm. Good luck!
View 1 Replies
ADVERTISEMENT
Jan 23, 2011
I couldn't find a driver for Canon i320 for Fedora 14. Is there any way to get the driver ?
View 3 Replies
View Related
Jul 26, 2011
In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?
View 5 Replies
View Related
Jan 8, 2010
I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies
View Related
Jan 1, 2011
Where I can find a linux driver for my Canon ip1600 printer? I have scoured the internet and cannot seem to find one.
View 1 Replies
View Related
Jan 26, 2010
Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.
View 5 Replies
View Related
Jun 21, 2011
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies
View Related
Jan 16, 2011
I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies
View Related
Sep 11, 2010
I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies
View Related
May 8, 2009
As I try to install the driver for canon mp 160 driver, I realize that canon dun't open their drivers to open source. code...
I should follow something similar to http://forums.fedoraforum.org/archive/index.php/t-144423.html, right? i.e. download the rpms and rpm -Uvh in the same directory, right?
View 3 Replies
View Related
Oct 17, 2010
I recently upgraded (fresh installed) from OpenSUSE 10.3 to OpenSUSE 11.3. One thing I noticed missing was support for my Canon MP600 printer. Searching around, I found a solution on a Finnish OpenSUSE support page (which I translated with Google):
Canon MP600 ei asennu
Here's the fix:
1. Download file Linux_Print_Filterv270.tgz from Canon Print Filter for Linux (rpm)
2. Unpack with: tar xvzf Linux_Print_Filterv270.tgz (this also has support for other printers, including MP610, MP510, IP3300, and IP4300).
3. Install cnijfilter-common-2.70-2.src.rpm
4. Install cnijfilter-mp600-2.70-2.i386.rpm
This errors out with missing dependencies:
# rpm -Uvh cnijfilter-mp600-2.70-2.i386.rpm
error: Failed dependencies:
libgdk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libglib-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgmodule-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgtk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libpng.so.3 is needed by cnijfilter-mp600-2.70-2.i386
libxml.so.1 is needed by cnijfilter-mp600-2.70-2.i386
5. I forced the installation using
zipper install cnijfilter-mp600-2.70-2.i386.rpm
Then select option "2" (break dependencies):
Solution 2: break cnijfilter-mp600 by ignoring some of its dependencies
Choose from above solutions by number or cancel [1/2/c] (c): 2
and it installs perfectly.
6. If you're using 64-bit openSUSE Linux (as I am), you need to copy the print filters:
mkdir -p /usr/lib64/cups/filter && cp -p /usr/lib/cups/filter/* /usr/lib64/cups/filter
7. Install the printer as usual.
I selected the MP610 CUPS+Gutenprintv5.2.4 simplified driver for my MP600 and printed a test page. The MP610 drivers work for MP600. There are about 4 of them, and I didn't try the others, but my guess is they will work also.
View 2 Replies
View Related
Dec 18, 2010
When I try to instal the rpm I downloaded from canons support website after authentication the install process fails with the following error report: [PK_TMP_DIR|dir:///var/tmp/TmpDir.kLgXId] Repository already exists.
I believe the packages I download (cnijfilter-common-3.40-1.i386.rpm and cnijfilter-mp250series-3.40-1.i386.rpm) are fine--not corrupted.
View 7 Replies
View Related
Feb 5, 2011
I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.
View 1 Replies
View Related
May 16, 2011
where I can get a driver?This Printer worked fine with Ubuntu 10.10 and Mint 10
View 4 Replies
View Related
Mar 11, 2009
1st. I still haven't got a reliable working printer driver direct on linux.
2nd. I am currently using the driver via smb to a windows box.
Okay there is no x86_64 driver for the capt drivers, that I could find. But you can download the standard linux drivers, which also contain the source.
The easiest way to get a 64bit driver is to unpack the drivers.
You will find a directory Src. In there are two source packages.
Copy both to /usr/src/packages/SOURCE
unpack both in a temporary directory.
I can't say which other packages you need to compile and build all of this, but you will need the c++ compilers, and various -devel packages. I would just add them via yast as you go along.
Anyway off to work out how to get this working directly on linux reliably.
View 9 Replies
View Related
Jan 23, 2010
I need to install the driver and I downloaded the Canon install package. The instructions read:
# rpm -ivh [file name of common module for CUPS drivers]
This rpm package construct was used in the Fedora distro.
Does it also work in openSUSE?
The only other construct given was for a deb package.
I looked in YasT for the driver but it was not there.
View 9 Replies
View Related
Jun 8, 2010
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
View 2 Replies
View Related
Apr 1, 2011
I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?
View 6 Replies
View Related
Jan 13, 2011
I'm using Ubuntu Lucid Lynx 10:04 64 bit, with kernel 2.6.32-24-generic, and want to use my printer Canon iP1880. I've tried looking on the internet and found: the use of 32 bits drivers for Linux on Linux 64-bit platforms. I've followed the procedure given but still failed to run the printer properly. There may still be the wrong procedure that I did, could you help me again to repeat what procedures I need to do, till now,I still don't know how to uninstalling that drivers? Are there other ways that may be successful so I can use my printer, if I practice?
View 1 Replies
View Related
Apr 23, 2011
Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...
View 6 Replies
View Related
Jan 30, 2011
I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?
View 1 Replies
View Related
Jul 5, 2011
I have Fedora13 OS installed in my compaq610 laptop. I want to upgrade my fedora version. What is the most suitable version to upgrade and how can I upgrade it?
View 1 Replies
View Related
Dec 14, 2010
How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
View 3 Replies
View Related
May 16, 2009
I use Fedora 10.Whenever i try to open an avi file with VLC player I get the error 'No suitable decoder module for fourcc XVID'.How can I remove this error?
View 11 Replies
View Related
Nov 5, 2010
I'm going to be building a new desktop computer and I'm trying to decide between either an ati or nvidia graphics card. I've previously only used integrated intel graphics in my laptop and I've never had any problems. However, from looking at the forums it looks like neither ati nor nvidia will be quite as smooth. What's the current consensus for ease of use?
View 1 Replies
View Related
Dec 8, 2009
I just installed fedora12 with seLinux active and OpenOffice:
Code:
# rpm -qa | grep openoffice
openoffice.org3-base-3.1.1-9420.i586
[code]....
View 5 Replies
View Related
Mar 16, 2010
I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies
View Related
Jun 27, 2011
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
View 3 Replies
View Related
Aug 25, 2009
I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies
View Related
Sep 21, 2009
I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies
View Related
