Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...
View 6 RepliesI have not been able to figure out a way to install Canon LBP2900 laser printer on Natty 64-bit.
View 2 Replies View RelatedI've been on numerous websites--with tutorials telling how to install the ATI drivers, I'm running Squeeze 6.0.1 Gnome amd64, the tutorial I am using is located at the ATIProprietary Debian Wiki [URL] when I try the following:
sudo apt-get install fakeroot debhelper build-essential libstdc++5
I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package fakeroot is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source.
Package debhelper is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package 'fakeroot' has no installation candidate
E: Package 'debhelper' has no installation candidate
E: Unable to locate package build-essentials
E: Unable to locate package libstdc++5
E: Couldn't find any package by regex 'libstdc++5'
I have a feeling that apt-get is not searching the web, yet searching a CD perhaps? Because when I've tried the apt-get update, I get the following:
Ign cdrom://[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54] squeeze Release.gpg
Media change: please insert the disc labeled
'Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110324-08:54'
in the drive '/media/cdrom/' and press enter
After doing that, nothing happens, and my apt-get still doesn't work, everything I try and install like build-essential says it's not found. Also when I
su
nano /ect/apt/sources.lst
the list in nano is empty???
I'm currently running a dual boot with windows xp/debian but as soon as I can get everything working, I'm going to turn this into a full linux system. Also my sound doesn't work, but my sound is HD sound that goes via the video card, I have it hooked up HDMI to my LG tv/monitor, sound works fine on xp. I think once I get the video card drivers installed it should possibly fix my sound issues at the same time.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies View RelatedI am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
Using Squeeze and a Canon Pixma IP4600 Printer. The color on the printed pages used to be true and now it isn't, it still print is color just not the correct colors.I am color deficient or color challenged (what used to be called color blind) which dosen't mean I can't tell the difference between what is on the screen and what is printed It's not the printer as I have tested it with other Linux and a windows system and it's good.
View 2 Replies View RelatedI'm using Ubuntu Lucid Lynx 10:04 64 bit, with kernel 2.6.32-24-generic, and want to use my printer Canon iP1880. I've tried looking on the internet and found: the use of 32 bits drivers for Linux on Linux 64-bit platforms. I've followed the procedure given but still failed to run the printer properly. There may still be the wrong procedure that I did, could you help me again to repeat what procedures I need to do, till now,I still don't know how to uninstalling that drivers? Are there other ways that may be successful so I can use my printer, if I practice?
View 1 Replies View RelatedMy purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
Just installed squeeze on a new laptop(had been runny Lenny on my older one with no issues, but no sound or wireless on the new one).I decided to install the ATI drive for my Radeon Mobility 4500(or some close revision) because the fan is constantly running and based on some other postings, it seems that it could be the graphics card causing it.Downloaded the driver from ATI's site and it seemed to install fine but when starting X.
View 11 Replies View RelatedI want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedI try to install the last evtouch-0.8.8.tar.gz driver from:
[URL]
on my squeeze an get this problem:# tar xvfz evtouch-0.8.8.tar.gz
# cd evtouch-0.8.8
# ./autogen.sh --prefix=/usr/lib/xorg
# make
(CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /tmp/evtouch-0.8.8/missing --run autoheader)
rm -f stamp-h1
[Code]....
hHey i recently installed Debian Squeeze 64bit over my Ubuntu & Windows, i got everything installed and running including all programs i need without a single problem The one thing i havent been able to do yet is install the Nvidia Driver for Geforce 8800gt, ive searched a few sites but one site is telling you to do this way and the the is telling you to do it another way then people are saying about having errors when xorg updates and stuff.
So i was wanting to know whats the easiest and best way to install the Nvidia Driver package (from nvidia website) onto Squeeze 64bit, i've done it on lenny but cant remember ow
If i get this working then il probaly use Debian as my main OS from now on.
I have this PC that came with W7 installed..i am removing it to install Debian Squeeze.I already have burned the 8 DVDs plus the Squeeze Kde CD.AFAIK, BCM 4312 is a proprietary driver, not shipped with Squeeze, but present as source in Unstable..I have already downloaded the files also... will the built *.deb be enough to enable my wireless, or to i still have to do it by hand. remove confilicting modules, build the module, insert it, put it in the corresponding filder. does the deb install do all that, or do i still have to do it, "the good 'ol way"?
View 4 Replies View RelatedI want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies View RelatedI'm a C/C++ Programmer and i need to write, compile and execute programs. I've heard gcc is good for this. But for the life of me i can't figure out how to download and install it.
View 13 Replies View RelatedAlright, Lenny has a working "fglrx-driver" package for my laptop, but Squeeze does not. Would it be possible to install the one from Lenny on Squeeze since Squeeze has newer libraries and such? I know I can't install new stuff with older libraries, but can I install the old stuff with newer libraries? I am at the end of my rope here! I mean ATI sucks and we all know this, but I've always found a Linux/open-source alternative that worked, until Squeeze.
View 10 Replies View RelatedI am using the latest squeeze (2.6.32-6 kernel) on a Thinkpad X100e.Most things works fine (after some tinkering though) but I cannot install the official ATI driver.I have tried:1) Downloaded the latest official drivers from ATI's site.a) If I choose install, it says that everything works but the driver is not actually installed. After reboot I don't have X anymoreb) If I choose build packages for Debian testing, the packages are not built. 2) Downloaded the not so latest official drivers. Same as in case 1)3) Tried to install them with the sgfxi script. The script reports a success but still after a reboot, I have no X.4) Tried to apt-get install fglrx-driver package from sid. Everything installs fine, after reboot I have X but no 3d acceleration.
View 14 Replies View RelatedI am trying to build the ATI fglrx 10.12 driver using the ATI installer on debian Squeeze 64bit.
Todo this I run the following command:
./ati-driver-installer-10-12-x86.x86_64.run --buildpkg Debian/testing
Which produces this output:
Created directory fglrx-install.oFbosX
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.801
Generating package: Debian/testing
cp: cannot stat `/home/nojan/Downloads/fglrx-install.oFbosX/x710_64a/*': No such file or directory
Package build failed!
Package build utility output: .....
dh_install: Compatibility levels before 5 are deprecated.
cp: cannot stat `./usr/X11R6/lib64/modules/linux': No such file or directory
dh_install: cp -a ./usr/X11R6/lib64/modules/linux debian/fglrx-driver/usr/lib/xorg/modules/ returned exit code 1
make: *** [binary] Error 2
dpkg-buildpackage: error: debian/rules binary gave error exit status 2
Removing temporary directory: fglrx-install.oFbosX
As you can see it fails during the build.
I can't make work my HP LaserJet P1006 printer on USB with OpenSUSE.
It's being detected as usb://HP/LaserJet P1006 but there is no specific driver for it. I try to use the generic HP LaserJet driver but didn't work. There is no driver for P1005 model, either.
Someone had the same problem here: Cups Printer Driver Incompatibility Hp Laserjet P1006 Printer
I have been asked to install Windows 7 on a computer that groans to even run Windows xp properly. As I know, this is like asking for the impossible, I am posting here to have some opinions about the use of Wine in Debian. In particular, I would like to know whether wine makes Debian less secure and more vulnerable to viral, malware, adware, etc infections.
View 1 Replies View RelatedWhen installing squeeze from either a dvd or cd (i've burned loads to see if it was the problem) my computer goes through the installation, until the dreaded step of "selecting and installing software" where the installation stops, and my computer turns itself off because of a kill signal sent to everything. I've tried booting with fb=false, and for some reason acpi=off, and neither of them solved the problem (acpi=off caused my laptop to turn off unexpectedly earlier) (HP 6735s, AMD64 using Turion X2, 4GB Ram)
View 4 Replies View RelatedIs it possible to somehow install Debian on-top of Ubuntu (Lucid Lynx)? I would just install Debian, but I am limited to a wireless connection. And currently a live wire connection is just not an option.
View 13 Replies View Relatedinstaller: jre-6u25-linux-x64.bin
extracted in /usr/java/
now, how do i make it recognized by iceweasel?
the reason of me using it instead of openjdk is that i need newer jre for IBM bladecenter manager web interface.
I've tried a few threads about install flash and haven't found the correct one.What is the correct way to install Flash on Debian Squeeze 64bit?
View 14 Replies View RelatedNow I can't install skype:
Code:
dpkg -l | grep skype
root@V-Desk:/home/ventsy#
aptitude install skype
E: Failed to fetch cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 DVD
[Code]....
The story was starting newbie named cassamovefall installing graphic driver for his new Debian Squeeze. Here his uname -r : 2.6.38-bpo.2-686-bigmem He use Dell N4110 notebook, with specs : Core I5-2410M & Dual Graphics ( Intel HD 3000 & ATI Radeon HD 6630M with codename TURKS )
[Code]...
He had tried kinds driver to install it; from fglrx, ati, radeon & radeonhd ; and also with kind ways. But they are gave same result, when login screen should appear, but it didn't. It's just showed blank black screen with blinking '_' (underscore) at top left. This is his Xorg.0.log when using radeon driver, via recovery-mode (text based) :
[Code]....
I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.
View 2 Replies View Related