Fedora Hardware :: Canon Mp 260 Is Missing Driver ?
Jul 26, 2011In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?
View 5 Replies
ADVERTISEMENT
OpenSUSE Hardware :: Canon MP600 Driver Missing In 11.3
Oct 17, 2010I recently upgraded (fresh installed) from OpenSUSE 10.3 to OpenSUSE 11.3. One thing I noticed missing was support for my Canon MP600 printer. Searching around, I found a solution on a Finnish OpenSUSE support page (which I translated with Google):
Canon MP600 ei asennu
Here's the fix:
1. Download file Linux_Print_Filterv270.tgz from Canon Print Filter for Linux (rpm)
2. Unpack with: tar xvzf Linux_Print_Filterv270.tgz (this also has support for other printers, including MP610, MP510, IP3300, and IP4300).
3. Install cnijfilter-common-2.70-2.src.rpm
4. Install cnijfilter-mp600-2.70-2.i386.rpm
This errors out with missing dependencies:
# rpm -Uvh cnijfilter-mp600-2.70-2.i386.rpm
error: Failed dependencies:
libgdk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libglib-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgmodule-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgtk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libpng.so.3 is needed by cnijfilter-mp600-2.70-2.i386
libxml.so.1 is needed by cnijfilter-mp600-2.70-2.i386
5. I forced the installation using
zipper install cnijfilter-mp600-2.70-2.i386.rpm
Then select option "2" (break dependencies):
Solution 2: break cnijfilter-mp600 by ignoring some of its dependencies
Choose from above solutions by number or cancel [1/2/c] (c): 2
and it installs perfectly.
6. If you're using 64-bit openSUSE Linux (as I am), you need to copy the print filters:
mkdir -p /usr/lib64/cups/filter && cp -p /usr/lib/cups/filter/* /usr/lib64/cups/filter
7. Install the printer as usual.
I selected the MP610 CUPS+Gutenprintv5.2.4 simplified driver for my MP600 and printed a test page. The MP610 drivers work for MP600. There are about 4 of them, and I didn't try the others, but my guess is they will work also.
Ubuntu :: Installing Canon Printer Driver - Missing LSB Information
Jun 8, 2010I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
Fedora :: Canon I320 Driver For 14 ?
Jan 23, 2011I couldn't find a driver for Canon i320 for Fedora 14. Is there any way to get the driver ?
View 3 Replies View RelatedRed Hat / Fedora :: Canon 3108b Laser Printer Driver ?
Jan 8, 2010I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies View RelatedHardware :: Canon MX310 Suitable Driver For Fedora?
Jan 27, 2011Many have suggested that since Canon does not offer a Linux driver for the MX310, one could use the driver for the MP150. I tried that but found the results very sketchy. After a bit of digging, I found a driver from Canon for the MX340 which works extremely well for the MX310 and allows much better configuration. It wasn't easy to find, so here's the URL in case you want to try for yourself: [URL]
The package (located in the tar file) that worked for me is cnijfilter-mx340series-3.30-1-i386-rpm. Good luck!
Hardware :: Canon Ip1600 Driver ?
Jan 1, 2011Where I can find a linux driver for my Canon ip1600 printer? I have scoured the internet and cannot seem to find one.
View 1 Replies View RelatedUbuntu :: Driver For Canon Pixma MX330?
Jan 26, 2010Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.
View 5 Replies View RelatedUbuntu :: Installing The Canon Printer Driver?
Jun 21, 2011i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies View RelatedHardware :: Driver For Canon MF4370 Printer ?
Jan 16, 2011I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies View RelatedGeneral :: Getting Canon Printer Driver Installation?
Sep 11, 2010I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies View RelatedCentOS 5 Hardware :: How To Install Canon Mp 160 Driver
May 8, 2009As I try to install the driver for canon mp 160 driver, I realize that canon dun't open their drivers to open source. code...
I should follow something similar to http://forums.fedoraforum.org/archive/index.php/t-144423.html, right? i.e. download the rpms and rpm -Uvh in the same directory, right?
Fedora :: Missing Graphics Driver After Update
Apr 5, 2010I updated my fedora 12 installation the other day, and have been working since then to try to get my computer back to working order. Here's what's up:
I ran a yum update and restarted the computer. When it booted back up I couldn't see anything but a black screen where there should've been a login screen. I can do terminal stuff if I hit ctrl+F2, so keep that in mind. I've determined that the problem is that kmod-nvidia-2.6.32.10-90.fc12.x86_64-195.36.15-1.fc12.1.x86_64 didn't get installed during the update process for some reason. I tried to yum install this file through my terminal access, but it didn't recognize any internet connection (neither wired nor wireless). I've downloaded the kmod-nvidia file to my Windows XP partition, and have also put it on my flash drive. So I need to know one of three things: How to access a Windows partition from terminal, how to access a flash drive from terminal, or how to connect to the internet from terminal so I can get the kmod file.
Red Hat / Fedora :: Keyboard Driver Missing Key Up Event?
May 26, 2010$ cat /etc/redhat-release
CentOS release 5.4 (Final)
I've tried two copies of a: Microsoft Natural ergonomic Keyboard 4000 v1.0 Both fail. The result is my screen fills up with whatever key was missed. Re-pressing the key does no good. I have to unplug the keyboard and then plug it back in. So, I'm interested to know if this is a general problem or just my system. Meanwhile, I'm turning down the key repetition rate so it doesn't immediately fill my screen when it happens.....
OpenSUSE Hardware :: Canon Mp250series Driver Failure ?
Dec 18, 2010When I try to instal the rpm I downloaded from canons support website after authentication the install process fails with the following error report: [PK_TMP_DIR|dir:///var/tmp/TmpDir.kLgXId] Repository already exists.
I believe the packages I download (cnijfilter-common-3.40-1.i386.rpm and cnijfilter-mp250series-3.40-1.i386.rpm) are fine--not corrupted.
Ubuntu Networking :: Driver For Canon Pixma Mg6120?
Feb 5, 2011I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.
View 1 Replies View RelatedGeneral :: Canon I560 Driver For Ubuntu 11.04 Or Mint 11?
May 16, 2011where I can get a driver?This Printer worked fine with Ubuntu 10.10 and Mint 10
View 4 Replies View RelatedOpenSUSE Hardware :: Canon LBB5100 Capt Driver X86_64 ?
Mar 11, 20091st. I still haven't got a reliable working printer driver direct on linux.
2nd. I am currently using the driver via smb to a windows box.
Okay there is no x86_64 driver for the capt drivers, that I could find. But you can download the standard linux drivers, which also contain the source.
The easiest way to get a 64bit driver is to unpack the drivers.
You will find a directory Src. In there are two source packages.
Copy both to /usr/src/packages/SOURCE
unpack both in a temporary directory.
I can't say which other packages you need to compile and build all of this, but you will need the c++ compilers, and various -devel packages. I would just add them via yast as you go along.
Anyway off to work out how to get this working directly on linux reliably.
OpenSUSE Install :: Canon ImageCLASS MF4150 Printer Driver
Jan 23, 2010I need to install the driver and I downloaded the Canon install package. The instructions read:
# rpm -ivh [file name of common module for CUPS drivers]
This rpm package construct was used in the Fedora distro.
Does it also work in openSUSE?
The only other construct given was for a deb package.
I looked in YasT for the driver but it was not there.
Ubuntu :: Canon Printer PIXMA IP1200 Driver Required
Apr 1, 2011I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?
View 6 Replies View RelatedDebian :: Canon Ip1880 On Ubuntu Lucid 10.04 64 Bit - Searching For Driver
Jan 13, 2011I'm using Ubuntu Lucid Lynx 10:04 64 bit, with kernel 2.6.32-24-generic, and want to use my printer Canon iP1880. I've tried looking on the internet and found: the use of 32 bits drivers for Linux on Linux 64-bit platforms. I've followed the procedure given but still failed to run the printer properly. There may still be the wrong procedure that I did, could you help me again to repeat what procedures I need to do, till now,I still don't know how to uninstalling that drivers? Are there other ways that may be successful so I can use my printer, if I practice?
View 1 Replies View RelatedDebian :: Installing Driver For LaserJet Canon LBP2900 At Squeeze
Apr 23, 2011Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...
View 6 Replies View RelatedFedora Installation :: Missing Network Driver For Asus P7P55D LE?
Nov 10, 2009I get about enabling the NIC on my Asus P7P55D LE motherboard in Fedora 11. During the installation process of Fedora 11 it seems as if the network card was not installed. I cannot find any drivers on Asus support site for Linux/Fedora.
How do I get it to work?
General :: Where To Find Driver To Canon Pixma IP2600 To Work In Ubuntu?
Jan 30, 2011I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?
View 1 Replies View RelatedUbuntu :: Canon IP2600 Won't Print - Missing Dependency Was "libcupsys2"
Feb 11, 2010I searched for solutions for hours and yet can't manage to get my printer to work. I downloaded (as it was suggested elsewhere) the "cnijfilter-common" and the "cnijfilter-ip2600" that I found on Canon website. However when I want to install the first package, it says : "Error : Failed to satisfy all dependencies (broken cache)". (I use Ubuntu 9.10) Edit : I found that the missing dependency was "libcupsys2" but I can't find it on Synaptic...
View 5 Replies View RelatedUbuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?
Dec 14, 2010How to get this scanner to work with Ubuntu 10.10
It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.
I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.
Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...
Fedora :: How To Install Canon Scanner
Mar 16, 2010I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies View RelatedFedora :: Networking F11 With Windows XP (Canon Printer)
Aug 25, 2009I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies View RelatedFedora :: Get A Canon MP210 Printer/scanner To Run?
Sep 21, 2009I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies View RelatedUbuntu :: Themes Missing After Nvidia-driver Install?
Feb 13, 2011I have just reinstalled 10.10. I used the alternate version since I had to add a fake raid Windows install. Ubuntu is on a OCZ SSD (very nice )
Install went fine. Update went fine (a bit over 300MB of updates) and everything looked as it should.
Then I installed the restricted Nvidia drivers for my GTX275 card and then gnome suddenly looks like the attached screenshot. I have tried to change theme and the colour of the top bar changes but that is that. No icon changes etc.
I have updated to the latest 270.18 drivers but the problem is still the same.