OpenSUSE Hardware :: Canon LBB5100 Capt Driver X86_64 ?

Mar 11, 2009

1st. I still haven't got a reliable working printer driver direct on linux.

2nd. I am currently using the driver via smb to a windows box.

Okay there is no x86_64 driver for the capt drivers, that I could find. But you can download the standard linux drivers, which also contain the source.

The easiest way to get a 64bit driver is to unpack the drivers.

You will find a directory Src. In there are two source packages.

Copy both to /usr/src/packages/SOURCE

unpack both in a temporary directory.

I can't say which other packages you need to compile and build all of this, but you will need the c++ compilers, and various -devel packages. I would just add them via yast as you go along.

Anyway off to work out how to get this working directly on linux reliably.

View 9 Replies


ADVERTISEMENT

OpenSUSE Hardware :: Canon CAPT Printer (LBP5050n) Stopped Working In 11.4 ?

Jul 17, 2011

After upgrading to OpenSuse 11.4, my CANON LBP5050n printer stopped working.

I have cndrvcups-capt-2.20-1.x86_64 installed and these are the command which used to work:

View 1 Replies View Related

OpenSUSE Hardware :: Canon MP600 Driver Missing In 11.3

Oct 17, 2010

I recently upgraded (fresh installed) from OpenSUSE 10.3 to OpenSUSE 11.3. One thing I noticed missing was support for my Canon MP600 printer. Searching around, I found a solution on a Finnish OpenSUSE support page (which I translated with Google):
Canon MP600 ei asennu

Here's the fix:
1. Download file Linux_Print_Filterv270.tgz from Canon Print Filter for Linux (rpm)
2. Unpack with: tar xvzf Linux_Print_Filterv270.tgz (this also has support for other printers, including MP610, MP510, IP3300, and IP4300).
3. Install cnijfilter-common-2.70-2.src.rpm
4. Install cnijfilter-mp600-2.70-2.i386.rpm

This errors out with missing dependencies:
# rpm -Uvh cnijfilter-mp600-2.70-2.i386.rpm
error: Failed dependencies:
libgdk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libglib-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgmodule-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgtk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libpng.so.3 is needed by cnijfilter-mp600-2.70-2.i386
libxml.so.1 is needed by cnijfilter-mp600-2.70-2.i386

5. I forced the installation using
zipper install cnijfilter-mp600-2.70-2.i386.rpm
Then select option "2" (break dependencies):
Solution 2: break cnijfilter-mp600 by ignoring some of its dependencies
Choose from above solutions by number or cancel [1/2/c] (c): 2
and it installs perfectly.

6. If you're using 64-bit openSUSE Linux (as I am), you need to copy the print filters:
mkdir -p /usr/lib64/cups/filter && cp -p /usr/lib/cups/filter/* /usr/lib64/cups/filter

7. Install the printer as usual.
I selected the MP610 CUPS+Gutenprintv5.2.4 simplified driver for my MP600 and printed a test page. The MP610 drivers work for MP600. There are about 4 of them, and I didn't try the others, but my guess is they will work also.

View 2 Replies View Related

OpenSUSE Hardware :: Canon Mp250series Driver Failure ?

Dec 18, 2010

When I try to instal the rpm I downloaded from canons support website after authentication the install process fails with the following error report: [PK_TMP_DIR|dir:///var/tmp/TmpDir.kLgXId] Repository already exists.

I believe the packages I download (cnijfilter-common-3.40-1.i386.rpm and cnijfilter-mp250series-3.40-1.i386.rpm) are fine--not corrupted.

View 7 Replies View Related

OpenSUSE Install :: Canon ImageCLASS MF4150 Printer Driver

Jan 23, 2010

I need to install the driver and I downloaded the Canon install package. The instructions read:

# rpm -ivh [file name of common module for CUPS drivers]

This rpm package construct was used in the Fedora distro.

Does it also work in openSUSE?

The only other construct given was for a deb package.

I looked in YasT for the driver but it was not there.

View 9 Replies View Related

OpenSUSE Hardware :: ATI Driver Doesn't Work On 11.3 X86_64?

Jul 27, 2010

I've got a ATI graphic card, which is not a Radeon bla bla, and it is a Fire Pro MV 2260. I download the official driver from ATI(AMD) website, and it gives me:

'firepro_8.723-linux_98794.zip'and unzip will produce 'fglrx-8.723'

I change the things according to this thread:

openSUSE Lizards ATI HD57xxx fglrx drivers under 11.3

However, after installation I can't start X. The log shows the kernal doesn't match.

Then I try to install the ATI Catalyst 10.7. It won't start X as well. I think maybe ATI Catalyst 10.7 is particular designed for Radeon, isn't it?

BTW, why there is no entry for 11.3 at:

Additional package repositories - openSUSE

NVIDIA drivers is updated, but ATI seems very lazy...

View 9 Replies View Related

OpenSUSE Network :: Unable To Acquire IP Address Over DHCP With Ipheth Driver In 11.4 X86_64?

Jun 14, 2011

Although Im using SuSE since 7.2 this is my first forum post here. I just plugged in my iPhone with USB and 11.4 created an eth1 interface for the iPhone and also loads the ipheth kernel module. Anyhow I am not able to acquire an IP address using DHCP. The iPhone OS is 4.2.1 and its an iPhone 3G 8GB black

View 2 Replies View Related

OpenSUSE :: 11.3 X86_64 Compile - Not Recognized Configure: Error: /bin/sh ./config.sub X86_64-unknown-linux- Failed

Aug 3, 2010

Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed

I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.

View 5 Replies View Related

Fedora :: Canon I320 Driver For 14 ?

Jan 23, 2011

I couldn't find a driver for Canon i320 for Fedora 14. Is there any way to get the driver ?

View 3 Replies View Related

Hardware :: Canon Ip1600 Driver ?

Jan 1, 2011

Where I can find a linux driver for my Canon ip1600 printer? I have scoured the internet and cannot seem to find one.

View 1 Replies View Related

Fedora Hardware :: Canon Mp 260 Is Missing Driver ?

Jul 26, 2011

In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?

View 5 Replies View Related

Ubuntu :: Driver For Canon Pixma MX330?

Jan 26, 2010

Does anyone have an idea of where i can find a driver for this printer? The system does not have one and if I try a driver for say the PIXMA MP220 which is CUPS + Gutenprint v5.2.4 [en] (actually, all the PIXMA drivers are that one) and I print the printer seems like it receives some command but nothing else happens. The printer says 'Printing from PC' and then goes back to the main screen.

View 5 Replies View Related

Ubuntu :: Installing The Canon Printer Driver?

Jun 21, 2011

i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04

View 7 Replies View Related

Hardware :: Driver For Canon MF4370 Printer ?

Jan 16, 2011

I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?

View 3 Replies View Related

General :: Getting Canon Printer Driver Installation?

Sep 11, 2010

I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.

View 9 Replies View Related

CentOS 5 Hardware :: How To Install Canon Mp 160 Driver

May 8, 2009

As I try to install the driver for canon mp 160 driver, I realize that canon dun't open their drivers to open source. code...

I should follow something similar to http://forums.fedoraforum.org/archive/index.php/t-144423.html, right? i.e. download the rpms and rpm -Uvh in the same directory, right?

View 3 Replies View Related

Ubuntu Networking :: Driver For Canon Pixma Mg6120?

Feb 5, 2011

I am new to Linux and to make matters worse, am trying to install a new printer but cannot find the drivers for it. it is a cannon pixma mg 6120.

View 1 Replies View Related

Red Hat / Fedora :: Canon 3108b Laser Printer Driver ?

Jan 8, 2010

I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?

View 1 Replies View Related

Hardware :: Canon MX310 Suitable Driver For Fedora?

Jan 27, 2011

Many have suggested that since Canon does not offer a Linux driver for the MX310, one could use the driver for the MP150. I tried that but found the results very sketchy. After a bit of digging, I found a driver from Canon for the MX340 which works extremely well for the MX310 and allows much better configuration. It wasn't easy to find, so here's the URL in case you want to try for yourself: [URL]

The package (located in the tar file) that worked for me is cnijfilter-mx340series-3.30-1-i386-rpm. Good luck!

View 1 Replies View Related

General :: Canon I560 Driver For Ubuntu 11.04 Or Mint 11?

May 16, 2011

where I can get a driver?This Printer worked fine with Ubuntu 10.10 and Mint 10

View 4 Replies View Related

Ubuntu :: Installing Canon Printer Driver - Missing LSB Information

Jun 8, 2010

I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is

Code:
sudo update-rc.d ccpd defaults 50
which gives me the error

Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.

I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.

View 2 Replies View Related

Ubuntu :: Canon Printer PIXMA IP1200 Driver Required

Apr 1, 2011

I have a Canon PIXMA iP1200 and Ubuntu does not recognise it. Need a driver for this printer?

View 6 Replies View Related

Debian :: Canon Ip1880 On Ubuntu Lucid 10.04 64 Bit - Searching For Driver

Jan 13, 2011

I'm using Ubuntu Lucid Lynx 10:04 64 bit, with kernel 2.6.32-24-generic, and want to use my printer Canon iP1880. I've tried looking on the internet and found: the use of 32 bits drivers for Linux on Linux 64-bit platforms. I've followed the procedure given but still failed to run the printer properly. There may still be the wrong procedure that I did, could you help me again to repeat what procedures I need to do, till now,I still don't know how to uninstalling that drivers? Are there other ways that may be successful so I can use my printer, if I practice?

View 1 Replies View Related

Debian :: Installing Driver For LaserJet Canon LBP2900 At Squeeze

Apr 23, 2011

Did some one solved the problem how to install Laser Printer Canon LBP2900 at Squeeze? The driver (version 2.20; in the documentation stays that they were tested some of previous versions at Debian 5.04 or like) I found at the Canon's site doesn't wish to be installed at Squeeze, but somehow I succeeded at Ubuntu 10.04 and Ubuntu 10.10...

View 6 Replies View Related

General :: Where To Find Driver To Canon Pixma IP2600 To Work In Ubuntu?

Jan 30, 2011

I have downloaded all drivers from canon website for linux or Ubuntu . My computer find this printer which suppose to be the right one but nothing happen ? usb://Canon/iP2600%20series. do I need more drivers or files to work in Ubuntu ?

View 1 Replies View Related

Fedora :: Removing Ati-driver-installer-11-5-x86.x86_64.run From 15?

Jun 5, 2011

how can i remove this driver ati-driver-installer-11-5-x86.x86_64.run from fedora 15 ? I cant seem to find the un-installer any where..

View 4 Replies View Related

Fedora :: NVidia Driver For New Kernel 2.6.35.12-88.fc14.x86_64?

Apr 12, 2011

I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:

[Code]...

View 4 Replies View Related

Slackware :: Proprietary Nvidia Driver Crashes - 13 X86_64

Jan 23, 2010

I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.

View 14 Replies View Related

CentOS 5 Server :: X86_64 Xen Xm Create Cannot Find Device Driver?

Apr 27, 2009

I am trying to create a xen vm on CentOs 5.3 using the following config file:

name = "vm5"
maxmem = 512
memory = 512
vcpus = 1

[Code]...

I'm assuming that it can't find a driver for a cdrom - but I am not too sure of that.

View 4 Replies View Related

Fedora Networking :: Kernel 2.6.35.10-74.fc14.x86_64, E1000e Driver 1.0.2-k4 Still Had Bugs?

Feb 11, 2011

I just built some machines with the Intel 82574L gigabit ethernet chip, loaded Fedora 14, and discovered a problem with the e1000e driver dying after a few minutes. A little time spent perusing the web told me that the same driver had problems in Fedora 12 and Fedora 13 as well. Congrats to Fedora for the hat trick.As of kernel 2.6.35.10-74.fc14.x86_64, e1000e driver 1.0.2-k4 still had bugs.[URL]

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved