this and well i just downloaded Fusion 14.1. (which is base on Fedora) Everything seems to be working right now except for the wireless....Im running a Dell 1501 with BCM 4311 or 12 something like that. Anyway, I have now idea what is going on as to why my wireless does not work. Im not very good at the command line so i would need step by step instructions on what to do
View 3 RepliesI am playing around with aircrack.
And was trying to see whether my wireless card on my laptop can pass the injection test
And I end up seeing the following... does it mean my wireless card is not able to run aircrack?
root@myubuntu:/home/myubuntu# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11bg ESSID:"" Nickname:""
[Code].....
About two days ago was when I was last able to connect wirelessly. I cannot recall a change I made to the system that would have caused this problem. Items to consider:
1. Under Network Manager, I am unable to click "Wireless Networks"
2. I ran the following code under in the terminal (sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt6|rt7|usb|witch|wl'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'; sudo hwinfo --netcard ; cat /var/lib/NetworkManager/NetworkManager.state; sudo lsmod) and proceeded to run enter BIOS where I enabled the Network Driver.
3. I am still unable to get the "Wireless Networks" to even be selectable under the Network Manager
4. When I return to BIOS, the computer shuts down immediately.
5. The start-up menu won't allow me access.
6. I have an HP G60-445DX notebook and an MCP77 Ethernet..
[Code]....
just installed ubuntu 11.04 on my old laptop (Dell latitude XT), to experience this OS. But for some reason I cannot get online, both wired and wireless network are 'grey', and i cannot enable them. Even when I try to go online with a USB wifi dongle,I also cannot enable wireless. Enabling Networking is selected.
I include the information I collect and hope this will allow you to give me a diagnose on how to make my wireless work.
lspci, for the build-in card
Code:
I installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
View 3 Replies View RelatedI installed 9.04 clean yesterday to try and once again move from Windows to Linux and I thought I would give it a real try this time to learn the new OS. Well, right off the bat my wireless connection does not work. By default my WPA/WPK security was set on my router. My wireless adapter does connect to the router but there is no internet access. If I remove the WPA/WPK security and leave it open I can connect and I do have internet access but as soon as I re-enable WPA/WPK security I lose internet access. I even tried WEP security and same result. What the heck is going on with this? I am not going to leave my router unsecured but that seems to be the only way this works. I also upgraded this morning to 9.10 and same problem so this is not limited to 9.04.
View 4 Replies View RelatedUsing a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
1 ) Machine Brand and Model (PC/Laptop):
Quote:
Dell XPS 1330.
2 ) Wireless Brand, Model and Wireless Chipset:
Quote:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Bus 002 Device 004: ID 05a9:7670 OmniVision Technologies, Inc. OV7670 Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
At this point, I have installed the STA driver for the device, though I have also tried with B43 (fwcutter). I have also tried with ndiswrapper with windows driver. All these cases, the end effect is the same.
I can see "Wi-fi" LED light up. When I bring up the KDE control module for networks, "Wireless" is disabled. However, when I right-click on the network manager icon on the taskbar, I see "Enable Wireless" checked on.
I am wondering if in the process of installing the ndiswrapprer drivers, I am messed up something?
I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network:
*-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
I'm running a Source Dedicated Server on my Ubuntu laptop, and to connect to it via external IP from other computers in the network I need to enable loopback in my router.This was working fine, but then I disconnected my laptop for a few days, and when I came back the wireless stopped working on my Xbox. I reset the router to factory defaults, and then setup everything again. It was all working fine until I enabled loopback again and power cycled my router. Now every time I do that, the internet on Ubuntu stops working and the wireless on the Xbox stops working.
Edit: You can ignore this I guess. It seems I was actually DISABLING loopback by enabling that router option, which I guess caused this. Strange, because the first time enabling this option was the only way to get my external ip to work. Oh well, everything is fine now.
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies View RelatedI am on a DELL Latitude 6500 laptop. It has a physical button to enable wifi. On Kubuntu 10.10 it was working perfectly. Now that I have made a fresh install to 11.04, whenever I try and turn the wifi on, I get a status message that my wifi is enabled. But the led indicator does not glow. and I could not find my router nor any other routers in my building. The following is some of the that might be useful to debug.
According to this website [url] the wifi is compatible with ubuntu and does not need any external drivers I guess.
currently running karmic on an old gateway laptop with kernel 2.6.31-22-generic and, as is par for how I handle challenges, I've jumped in with both feet - which is to say this is not a dual-boot situation. I've spent some time reading the forums (and other sources of information) and am grateful for all the knowledgeable people who are willing to share what they know.
My operating system seems to be functioning properly.I can get online via ethernet, but not via wireless. I have a lucent orinoco gold PC24E-H-FC (PCMCIA) card, which the computer isn't seeing. I am trying to follow the instructions here: [URL] to install the driver. Everything is going well until I get to the sudo make line. At that point I get the following display:
make -C /usr/src/linux-headers-2.6.31-22-generic M=/usr/src/orinoco-0.15rc4 KERNELRELEASE= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-22-generic'
/usr/src/orinoco-0.15rc4/Kbuild:8: *** Wireless extensions are not enabled. Stop.
[code]....
how I can fix it so I can continue on with the instructions. (For the record - if I just continue on, I can change directory in the next line, but I cannot remove either hermes or orinoco as "no such file or directory" seems to exist.)
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
i've just installed openSUSE 11.3 on my dell studio xps 1640. but i have problem with my WLAN . it's a WLAN 1640 mini-card and i think there is no problem with driver. because it seems that it's installed correctly but i can't see any wireless networks (it says "Device is not ready"). is there any suggestions?by the way, when i turn my wireless to on (it's a touch key not a switch) only my bluetooth indicator is enabled not my wifi indicator.
View 6 Replies View RelatedI have a compaq c784tu and it was shitty with xp. Vista is quite crap, so i turned over to ubuntu 10.4. The configuration of the laptop is: 1.73 GHz Intel Pentium Dual Core Processor T2370 with 1-MB L2 Cache, 533 MHz FSB featuring Intel Mobile 945GML Express Chipset Motherboard, 2-GB PC2-5300 DDR2 667 MHz SDRAM (Maximum 4-GB in 2 slots), a 160-GB SATA 5400 rpm Hard Disk Drive and 8x Super Multi Double Layer (8.5 GB) Slot-in DVD Writer.Everything worked like a charm and I was able to connect to the internet through a public wifi network. However, I came home this week to my mothers house, where they have a dsl-router to connect to the internet whih uses bridge mode pppoe. I tried to connect to the internet through it, and it initially couldnt. However, I got around that by doing a clean install of ubuntu. I was able to then connect to the internet using "sudo pppoeconf" and "sudo pon dsl-provider"One night the network manager app on the top left disappeared and would not come on. I figured I had fried my wifi adapter, however, lspci -v confirmed its presence.Further, "system>admn>system testing" detected the adapter aswell. I tried the iwconfig command in the terminal the result was:
lo no wireless extensions
eth0 no wireless extensions
wlan0 IEEE 802.11bg ESSIDff/any
[code].....
I followed Leigh123's nvidia guide, I can't seem to get my computer to allow 3D rendering. I'm using the 32 bit edition and I have a GeForce 9800 GT Graphics card. I'm pretty much a novice with Linux right now, so I know the problem most likley is that I've done something wrong. I did install Compiz, but it wont do anything.
View 1 Replies View RelatedIt appears that the problem of Bluetooth which I suffer of them in version 12 is still in version 13, where I've upgraded and there are still problem. Bluetooth was working version 12 (before update). I was hoping that the problem is resolved version 13 but still problem I've had:
Bluetooth is connected to usb , but the computer does not recognize
Click on the button enable
There is a bug in Fedora 15 with Bluetooth so it is not enabled by default. It took me quite awhile to figure out how to enable it.
This explains how to configure Bluetooth [url]
This explains that there is a bug in Fedora 15 so bluetooth is not enabled by default. Just use these 3 commands and everything should work. [url]
I enabled my SysRq key and now can't take screenshots. I have no idea why this happened. I enabled it so that I could have a failsafe way to shut the system down in case of a failure and then this happened.
View 5 Replies View Relatedi have enable the effects but not change... in animators and add ons animations
View 3 Replies View RelatedI was trying to install and run Compiz fusion with fedora 12. I downloaded all the packages etc using both the gui and terminal according to some guides. When I click the desktop effects button, it says 3d is not enabled, however the guide I followed said to enter glxgears (or something to that effect) and if it came up with 3d gears then 3d was enabled...I am very confused. There was an application I ran after downloading/installing some packages that caused the screen to go white and I had to reboot. I read in another forum this may have something to do with my drivers...gotta check my graphics card specs, will post when I find them.
View 5 Replies View RelatedI installed fedora 13 in my system. This is the only OS in my system. I couldn't enable RPM fusion. So software cannot be installed (like VLC. etc)
View 8 Replies View RelatedTrying to keep selinux enabled. When I start SeLinux Troubleshooter from the menu, which is inautostart as well, It tells me SELinux not enabled, sealert will not run on nonSELinus systems".How do I get SELinux permanently started then
View 10 Replies View RelatedI have opened up the Service Configuration window that shows all the services and their status. My httpd says that it is enabled, but also that "this service is dead" and there is a orangish triangle. I can run phpMyAdmin on my server, but I can't run it from any other PC on my network.
View 13 Replies View RelatedEverytime I add the repo for adobe flash player YUM freezes, it does the same with RPM fusion repos as well.
I added adobe repo from their website and installed the repo via KPackagekit.
It even installed flash plugin, but now after reboot evrytime I do yum check-update it just freezes indefinately(altough it does show that loaded presto plugin message)
And if i rename adobe repo filename(from /etc/rum.repos.d) to something else YUM works perfectly fine!
I installed Nvidia drivers n my Fedora 14 and was working just fine!I also have disabled Nouveau to make it work.But after i changed the selinux to permissive my X no longer loads!
View 1 Replies View RelatedI'm struggling with my computer to get it to run a Windows 7 x64 machine as domU with VGA passthrough using Xen and Fedora 14 as dom0.
The problem is that when I enable IOMMU in BIOS, it simply freezes during boot. If booting with the dom0 pvops kernel via Xen it stops at the "IOMMU enabled" message. If I boot the regular unpatched kernel without the Xen; all I see is naught but a blinking cursor at the upper left corner.
I tried booting from the Fedora 14 liveCD and the lubuntu 10.04 liveCD and they booth freeze in a simlar fashion afer I get past their bootloaders.
The Windows 7 partition boots just fine and I can do all sorts of stuff in it (such as conducting computationally intensive tasks) without problems.
I just fresh installed Fedora 11, and tried to connect via ethernet. I connected the cable and connection was started (in the network managed the two gray circled turned green) but then instead of connecting me the connection was aborted. I am behind a router if it helps and made sure eth0 is enabled. PS this is the output of "service network start":
Quote:
[root@Gal-PC subsys]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
[code]......
In Xorg.0.log, if you have an extension disabled in the configuration file, you will see: (**) Extension DAMAGE disabled In the first few lines ... however, later on you see (II) Initializing built-in extension DAMAGE So which is it? Is there a memory map or something I can dump and view to see which extensions are actually loaded into the X server? Is there a delineation between "disabled/enabled" and "initialized"? OK I found it:
xdpyinfo -queryExtensions | awk '{print; if (NF<=1) exit;}'