About two days ago was when I was last able to connect wirelessly. I cannot recall a change I made to the system that would have caused this problem. Items to consider:
1. Under Network Manager, I am unable to click "Wireless Networks"
2. I ran the following code under in the terminal (sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt6|rt7|usb|witch|wl'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'; sudo hwinfo --netcard ; cat /var/lib/NetworkManager/NetworkManager.state; sudo lsmod) and proceeded to run enter BIOS where I enabled the Network Driver.
3. I am still unable to get the "Wireless Networks" to even be selectable under the Network Manager
4. When I return to BIOS, the computer shuts down immediately.
5. The start-up menu won't allow me access.
6. I have an HP G60-445DX notebook and an MCP77 Ethernet..
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
I have a compaq c784tu and it was shitty with xp. Vista is quite crap, so i turned over to ubuntu 10.4. The configuration of the laptop is: 1.73 GHz Intel Pentium Dual Core Processor T2370 with 1-MB L2 Cache, 533 MHz FSB featuring Intel Mobile 945GML Express Chipset Motherboard, 2-GB PC2-5300 DDR2 667 MHz SDRAM (Maximum 4-GB in 2 slots), a 160-GB SATA 5400 rpm Hard Disk Drive and 8x Super Multi Double Layer (8.5 GB) Slot-in DVD Writer.Everything worked like a charm and I was able to connect to the internet through a public wifi network. However, I came home this week to my mothers house, where they have a dsl-router to connect to the internet whih uses bridge mode pppoe. I tried to connect to the internet through it, and it initially couldnt. However, I got around that by doing a clean install of ubuntu. I was able to then connect to the internet using "sudo pppoeconf" and "sudo pon dsl-provider"One night the network manager app on the top left disappeared and would not come on. I figured I had fried my wifi adapter, however, lspci -v confirmed its presence.Further, "system>admn>system testing" detected the adapter aswell. I tried the iwconfig command in the terminal the result was:
lo no wireless extensions eth0 no wireless extensions wlan0 IEEE 802.11bg ESSIDff/any
I installed 9.04 clean yesterday to try and once again move from Windows to Linux and I thought I would give it a real try this time to learn the new OS. Well, right off the bat my wireless connection does not work. By default my WPA/WPK security was set on my router. My wireless adapter does connect to the router but there is no internet access. If I remove the WPA/WPK security and leave it open I can connect and I do have internet access but as soon as I re-enable WPA/WPK security I lose internet access. I even tried WEP security and same result. What the heck is going on with this? I am not going to leave my router unsecured but that seems to be the only way this works. I also upgraded this morning to 9.10 and same problem so this is not limited to 9.04.
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Bus 002 Device 004: ID 05a9:7670 OmniVision Technologies, Inc. OV7670 Webcam Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
At this point, I have installed the STA driver for the device, though I have also tried with B43 (fwcutter). I have also tried with ndiswrapper with windows driver. All these cases, the end effect is the same.
I can see "Wi-fi" LED light up. When I bring up the KDE control module for networks, "Wireless" is disabled. However, when I right-click on the network manager icon on the taskbar, I see "Enable Wireless" checked on.
I am wondering if in the process of installing the ndiswrapprer drivers, I am messed up something?
I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network: *-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
I'm running a Source Dedicated Server on my Ubuntu laptop, and to connect to it via external IP from other computers in the network I need to enable loopback in my router.This was working fine, but then I disconnected my laptop for a few days, and when I came back the wireless stopped working on my Xbox. I reset the router to factory defaults, and then setup everything again. It was all working fine until I enabled loopback again and power cycled my router. Now every time I do that, the internet on Ubuntu stops working and the wireless on the Xbox stops working.
Edit: You can ignore this I guess. It seems I was actually DISABLING loopback by enabling that router option, which I guess caused this. Strange, because the first time enabling this option was the only way to get my external ip to work. Oh well, everything is fine now.
I'm having an issue changing the flash plug to display flash. I clean installed 10.04 a week ago, upgraded to to the closed source adobe plugin, and everything was great. However, a day ago, I had an issue with one site, and I decided to switch back to the default swfdec player. Since that time I have not been able to switch back to adobe. Every time I attempt to, firefox complains that adobe is already installed. Even if I remove the adobe flash plugin via synaptic and allow firefox to reinstall it, it still uses swfdec.
currently running karmic on an old gateway laptop with kernel 2.6.31-22-generic and, as is par for how I handle challenges, I've jumped in with both feet - which is to say this is not a dual-boot situation. I've spent some time reading the forums (and other sources of information) and am grateful for all the knowledgeable people who are willing to share what they know.
My operating system seems to be functioning properly.I can get online via ethernet, but not via wireless. I have a lucent orinoco gold PC24E-H-FC (PCMCIA) card, which the computer isn't seeing. I am trying to follow the instructions here: [URL] to install the driver. Everything is going well until I get to the sudo make line. At that point I get the following display:
make -C /usr/src/linux-headers-2.6.31-22-generic M=/usr/src/orinoco-0.15rc4 KERNELRELEASE= modules make[1]: Entering directory `/usr/src/linux-headers-2.6.31-22-generic' /usr/src/orinoco-0.15rc4/Kbuild:8: *** Wireless extensions are not enabled. Stop.
[code]....
how I can fix it so I can continue on with the instructions. (For the record - if I just continue on, I can change directory in the next line, but I cannot remove either hermes or orinoco as "no such file or directory" seems to exist.)
Ubuntu, been using windows for years and now use Mac. I have Ubuntu running on a netbook at work and all of a sudden my wireless connection not only doesn't work, it doesn't seem to exist! Wired still works fine, but the wireless option has vanished. How do I reset or restore or whatever it takes to get my wireless working again?
I downloaded the latest version of Ubuntu yesterday (10.04 LTS) for the first time and it worked like a treat, with the Internet conencting immediately without any problems. However, this morning I turned on my laptop and despite seemingly connecting to the network, Ubuntu won't conenct to the Internet. It is also repeatedly asking for me to re-input the WEP Key despite it being correct and always automatically inputted.
I've been looking around for hours on the Internet to try and find a solution but to no avail, even though people do seem to experience similar problems.
10.04 was connecting to wireless on boot up without a problem.After updating, it can no longer do it. I have to click on the wireless icon (which has an exclamation mark through it) and connect to hidden. I can then choose my wireless profile and am asked for my elevated privileges password. Once supplied, the connection is made.I presume the encryption password is 'locked' now at boot.
I have a msi netbook with ubuntu netbook remix installed and it was working great until yesterday when suddenly it stopped detecting my home network. There are no problems on my two other machines, so I'm sure the problem is the netbook. I have no idea how to go about troubleshooting this. I was hoping someone could help me by giving me a place to start.
A couple days after an update to Ubuntu 10.10's networking stuff I was unable to connect to my wireless network that had a password. Now, I can connect to a different connection that doesn't have a password but when I try to go to mine it doesn't work.
Running on a compaq nc6000
And yes I do know that the password is correct as I am connecting right now on Win7.
I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network.My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter.
It still works fine if I boot into "good old" Windows. I must say I am SOOO disapointed with the Network Manager in Ubuntu which was great until 10.4 and has been crap ever since. I have had so many problems with my Vodafone USB and had to find an alternative method of getting it to work. Now the last straw is that my wireless LAN card is not getting recognised on startup so I have not connectivity when at home. (USb via Vodafone is no good in my area). I am typing this via an old Windows PC because my Ubuntu just does not work anymore. I have not installed anything new so what has happened - or how can I get it to work again. I was completely sold on Ubuntu but am now considering reverting to Windows. It would be worth paying for an operating system that actually works, even if I have all the other hassles as well. A year ago Ubuntu was great - it all worked ! Not any more how can all that good work have gone down the pan - I can't understand how anyone could let all these nertwork problems occur - it isn't just me - read the threads - it's widespread.
I installed Ubuntu 9.10 on a new acer emachine e525. All is fine except that now I cannot switch the wireless on as the button above the keyboard no longer functions. Can anyone tell me what I can do to fix this as wireless is obviously vital in a laptop. BTW the wireless waqs working fine while the machine had Vista on it.
recently installed 10.04 on his hp pavilion laptop and we got everything working fine, including the wireless internet. When he installed some recommended software updates his card is no longer being detected although wired networking is still fine.
I recently installed Ubuntu x64 on my dell studio 1535 using the windows installer (wubi).
All seems to be working fine apart from the built in wireless card, the proprietary driver (found in hardware drivers) installs and activates successfully and works perfectly. Until I shut down or restart the system. On the next boot the wireless card is 'disabled' and no longer works.
The card I have is a Broadcom Corporation BCM4312 802.11b/g
I am going to try a proper install on a second partition rather than using wubi later on but wondered if this was a commonly occuring problem?
The wireless card works as soon as the driver installs, however I am shown a "restart to activate driver" message and after restarting it's dead.
I had the Wireless Broadband working. It stopped working after I closed the laptop (suspend). Also the wifi will not connect until reboot. Now the entry for the Wireless Broadband is gone, and the tab for it is greyed out as well.I would be happy to submit this as a bug and assist with the debugging process.
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
just installed ubuntu 11.04 on my old laptop (Dell latitude XT), to experience this OS. But for some reason I cannot get online, both wired and wireless network are 'grey', and i cannot enable them. Even when I try to go online with a USB wifi dongle,I also cannot enable wireless. Enabling Networking is selected.
I include the information I collect and hope this will allow you to give me a diagnose on how to make my wireless work.
this and well i just downloaded Fusion 14.1. (which is base on Fedora) Everything seems to be working right now except for the wireless....Im running a Dell 1501 with BCM 4311 or 12 something like that. Anyway, I have now idea what is going on as to why my wireless does not work. Im not very good at the command line so i would need step by step instructions on what to do
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
I installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
I am on a DELL Latitude 6500 laptop. It has a physical button to enable wifi. On Kubuntu 10.10 it was working perfectly. Now that I have made a fresh install to 11.04, whenever I try and turn the wifi on, I get a status message that my wifi is enabled. But the led indicator does not glow. and I could not find my router nor any other routers in my building. The following is some of the that might be useful to debug.
According to this website [url] the wifi is compatible with ubuntu and does not need any external drivers I guess.
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output: emil@emils:~$ iwconfig lo no wireless extensions.
