I installed the Syncrify server and client on a Linux box. From what I've read on their site, Syncrify comes with a built in self-signed SSL certificate. However after setting the SSL port on the Syncrify Admin Set-Up, I am still unable to login with a client through SSL. This works: (5800 is the default port for HTTP)[URL]...
However the following do not work:[URL]...
I have 389-DS ( Fedora DS) setup on CentOS 5.3 and working fine. I configured LDAP Client and want to login as user created under fedora DS Client. From Client Machine, I can easily see:
Code:
[root@fedoraDS-Client ~]# id ajrain
uid=569(ajrain) gid=569 groups=569 context=root:
system_r:unconfined_t:SystemLow-SystemHigh
This is User from LDAP Server (fedora DS Server) which is showing in Client Machine. So It means its retreiving value from Server. Correct? Now When I am trying to login , it says "Server unexpectedly closed network Connection". When I supplied user password:
Code:
login as: ajrain
ajrain@fedoraDS-Client's password:
The File /var/log/secure says:
Code:
Jan 27 02:39:27 localhost sshd[3996]: pam_unix(sshd:auth):
authentication failure; logname= uid=0 euid=0
tty=ssh ruser= rhost=10.210.53.104 user=ajrain
Jan 27 02:39:27 localhost sshd[3996]: Failed password for ajrain from 10.210.53.
104 port 1241 ssh2
Jan 27 02:39:27 localhost sshd[3997]: fatal: Access denied for user ajrain by PAM account configuration
I am not able to login to server from console attached to server, every time i enter username & password but it again asks for username & password. But when i try to login to server from remote machine, login happens properly.
View 4 Replies View RelatedI'm following [URL] to build a mail server running postfix virtual. The server is now running able to send and receive mails. But remote mail client 'Evolution' can't login the server to send/receive mails.
# tail /var/log/mail.log
Code:
Nov 17 09:00:32 xen05 postfix/smtpd[6601]: warning: xen0.satimis.com[192.168.0.110]: SASL PLAIN authentication failed: authentication failure
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Nov 17 09:00:48 xen05 last message repeated 3 times
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication failure: Password verification failed .....
Still fail: "Login authentication" and "plain authentication" same result.
Client unable to listen to NIS domain server.I have configured an NIS server, which is working fine.I then configured an NIS client to share some like passwd, shadow, etc.By default the client was trying to communicate to the NIS server using the broadcast method..However if I restart the client computer, it fails to communicate or Listen to the domain server. Once I login to the pc, I then check the /etc/yp.conf file and it switched back to the broadcast method.Is there any way that I can make this entry: domain naman.com server station51.naman.com permanent so that even after the reboot it should communicate using the client-server connection rather than the broadcast connection.
View 8 Replies View RelatedI have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies View RelatedI have Cisco Switch 2960, and it has been configured with dhcp (from 192.168.43.31 to 192.168.43.) and all my client connected to It. I have a modem and Its IP is 192.168.1.1, I used Fedora Linux system in between Modem and Switch , and made IP forwarding (Only one ethernet port is avaliable in Fedora Linux System), so that I can use the Internet through out the LAN. But When I try to ping modem form client system, I get an message
icmp_sep=1109 Redirect Host: (New nexthop: 192.168.1.1),
I am not able to connect Internet from my Client system.
Until today I have never encountered problems taking over my old Windows-machine. But now it doesn't work anymore... Could it be that something changed with an update of my Ubuntu (10.04) which caused this?
The Windows machine does not update or change, and I cannot imagine that I changed something myself at that machine...
I can still reach it using "smb://192.168.1.33/"
But when I try Remotedesktop Client with that IP it gives the message;
Error (grdesktop)
Autoselected keyboard map en-us
ERROR: 192.168.1.33: unable to connect
When I try using Terminal Server Client (I read in another thread that could solve the problem) I get the same response...
Where can I find out what the problem is?
im using open suse,my internet connection is of low speed which is a broadband connection, in order to use gyache is there any bandwidth threshold required ,because theres no problem with pidgin for my net.if so tell me what to do to use gyache.
View 2 Replies View RelatedI'm not able to login as a root through ssh but i'm able to switch as a root user once i get into the Debian boxI already modified /etc/ssh/sshd_config to PermitRootLogin Yes and restart the ssh service
View 3 Replies View RelatedI was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
I am using CentOS. When i try to login as root using login command,i get the following:
Code:
[avi@localhost ~]$ login root
Password:
[code]...
I am unable to login as root to a linux machine through SSH. Login through console is working fine. SSH is not working only for root user. It is working fine for other users. I have checked the sshd_config file and it says:PermitRootLogin yesI'd be grateful if somebody can give an idea about what is going wrong.
View 15 Replies View RelatedOne user asked me that he was not able to login through winscp. He gave me his old password and asked to reset the password.
View 3 Replies View Relatedi am not able to do root login even from terminal also. I was trying to block remote login through this ........
>>How can we prevent the "root" account from remote logging in via SSH
>>and Telnet but still permit root-equivalent personal accounts to log in
>>remotely?
[code]....
after this i am not able to make root login from su as well.
I have a Linux machine which I set up for my personal use at home. I installed Fedora Core 11 a long time ago, and recently I noticed that I am not able to log in as root (I didn't realize this issue until recently since I always have been logging in as a user account that I created during the FC11 installation).When I login as a user account instead of root, I can use the su command with the password I set up for the root account. Even when I'm in GUI mode and try to make changes to the system from the user account, the GUI asks to enter the root password, and I type the password I set for root and it works. However, if I boot the machine and try to log in the system as root, password that I set up is rejected.
I'm very puzzled with this problem because with my limited knowledge on Linux system, I thought the root password and the su password are the same (i.e. when you install Linux OS, you set the root password, and you use the same password for using the su command). I do not know exactly when this problem started, but the only thing that I can think of as a cause of this issue is that I once changed the root password from GUI using System > Administration > Root password since the system one time complained about the low security strength of the root password.
I newly installed Ububtu 8,04.3. I formatted my hard drive and erased Windows XP and tried to do the manual partitioning but don't have enough knowledge so picked the guided tour. Everything seemed to install but when I restarted it comes to "computer log-in" and wants a user name and password. I put in the user name I chose during installation and tried to put in the password but it wouldn'd type in - it also seemed to want a name for "computer." Does anyone know where I went wrong? I've been struggling to learn computer stuff on my own.
View 14 Replies View RelatedI am trying to someone get to their records on a CentOS 5 box and the username/passwords they have given me are not being recognized.
View 11 Replies View Relatedive tried to disable portreserve and dnsmasq, ive tried amarok, vagalume, rhythmbox, songbird to login to last.fm but i cant, ive gooogled for it. from the web browser its works
View 3 Replies View RelatedI downloaded Gentoo and burnt it on CD.I did boot the livecd and the system passed starting stage and it recognised my hardware. After that, there islivecd login prompt, and obviously I tried to use root and no password but it says login incorrect. This is what I did:
Code:
livecd login: root
Password: [hit enter here]
[code]....
I'm using ubuntu 9.04 formy web developments. today morning i boot my syste, normally. but it does not allow me to login. it displays some routine messages like command prompt. These messages are like this given below.,
[1.804538] phy 0 ->rt61pci_bbp+read : Error - PHY_CSR3 register busy. Read failed.
[2.804538] phy 0 ->rt61pci_bbp+read : Error - PHY_CSR3 register busy. Read failed.
[3.804538] phy 0 ->rt61pci_bbp+read : Error - PHY_CSR3 register busy. Read failed.
[4.804538] phy 0 ->rt61pci_bbp+read : Error - PHY_CSR3 register busy. Read failed.
[Code]....
I installed Fedora 11 and was trying to setup a Web server for pure LAMP development and wanted to port forward with router so that my webserver can be access from inter net.
Server installation was perfectly fine. I was able to login from the user which I created during the installation. Instead of auto get ip I assigned 192.168.1.100 and then I set a HTML Server port forward.
Where the problem started.
I wanted to configure few users on vsFTPd and I tell you truly there is no place on Google where some one has defined a descent way which any person can understand that we can add some users.
Somewhere I found that Linux normal users can also access ftp if the local_user directive is set YES which i did and I added 3 users.
I wanted that whenever user is connected by vsFTPd returned them /var/www/html directory. Where as vsFTPD was taking them to their home directory (respective to each user)
I was unable to find any way that I can configure vsFTPd to set one default directory path which take every user to www/html directory so that developers can deploy websites.
I notice Gnome GUI offers each user a home directory path so I though why not I gave every new user and existing user /var/www/html as their home directory
which i did... and this is how my Server stop responding to any further login attempts.
FTP is still working fine if I left it open It let the ftp client to connect but Linux server is not allowing login by any user
It gives an error 'Could not update ICEAuthority file /var/www/html//.ICEauthority'
And when i click close then next message is : 'There is problem with the configuration server (/usr/libexec/gconf-sanity-check-2 exited with status 256)'
Is there any way i can undo? Is there any way i can go directly to shell and remove those users and re-add some new users in the default way - I believe if I can add one new user with default directory /home/user I will be able to login
After this is resolve still I will need to search how we can add FTP users and take them to the directory /var/www/html
I installed dtc, dtc-postfix-courier and a few other depend software. When I re-started the server, I was unable to login with my usual login information. I am able to go to recovery mode to change the password but I am still unable to login to the system. Essentially, only root is able to access data on the server.
View 14 Replies View RelatedI recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
System was fine with :Ubuntu 9.04 (had also installed kde )then....I wanted to try some change to gdm so i downloaded gdm while building it , it asked "PAM" libraries to be installed so i installed PAM ... but ignored the instruction to reinstall SHADOW (library i guess..),Now :on booting system i get login menu but i am not able to login , it says some critical error occured
1) install new copy of UBUNTU and remove old
ps :1) i can log into system through live cd
2) i can use recovery mode boot and log into terminal as root(startx is not working from this terminal..
I have an iMac G4 that I installed Jessie on successfully. However, when it boots, one of the last messages is:
[FAILED] Failed to start Load Kernel Modules.
Last line is something along the lines of:
fb: switching to nouveaufb from OFfb NVDA,NVMac
And then the text starts dissolving, and the entire screen cycles through different colors. I presume it is sitting at the graphical login prompt but it's not displaying correctly.
Based on some Google searches, it seems like I should be able to resolve this by editing /etc/modules but I can't get to that point. I have tried to get to a terminal using ctrl-alt-F1 through ctrl-alt-F12. No luck. I tried different yaboot options that were supposed to avoid using the video driver. No luck. How do I get the machine to boot straight to a regular text login instead of the X one?
This machine worked fine running Mac OS X this morning, so I don't think it's the hardware. What I can do.
ive tried to disable portreserve and dnsmasq, ive tried amarok, vagalume, rhythmbox, songbird to login to last.fm but i cant, ive gooogled for it.tried from the web browser and its [URL] i have a router and i have tried an ubuntu laptop and its working here is my log, but the last date is 090128 ??
Quote:
090128 21:45:51 - 140172703823872 - setState(665) - L4
Radio state: State_Stopped
"090128 21:45:52" - "-2143815680" - virtual void ScrobblerPostRequest::request() ( 855 ) - L4
[Code]....
Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies View RelatedI have reinstall my server. I think everything was okey. But i can not connect my server with NX Client.
View 3 Replies View RelatedI have disabled password logins to a server.I want to transfer some files to it using a client like FileZilla but there was no way I could give private key to filezilla is there an ftp client
which supports key based login?