General :: Unable To Connect With Remotedesktop Client (Ubuntu 2 Windows)
Aug 13, 2010
Until today I have never encountered problems taking over my old Windows-machine. But now it doesn't work anymore... Could it be that something changed with an update of my Ubuntu (10.04) which caused this?
The Windows machine does not update or change, and I cannot imagine that I changed something myself at that machine...
I can still reach it using "smb://192.168.1.33/"
But when I try Remotedesktop Client with that IP it gives the message;
Error (grdesktop)
Autoselected keyboard map en-us
ERROR: 192.168.1.33: unable to connect
When I try using Terminal Server Client (I read in another thread that could solve the problem) I get the same response...
Where can I find out what the problem is?
View 1 Replies
ADVERTISEMENT
Jan 28, 2010
I have Cisco Switch 2960, and it has been configured with dhcp (from 192.168.43.31 to 192.168.43.) and all my client connected to It. I have a modem and Its IP is 192.168.1.1, I used Fedora Linux system in between Modem and Switch , and made IP forwarding (Only one ethernet port is avaliable in Fedora Linux System), so that I can use the Internet through out the LAN. But When I try to ping modem form client system, I get an message
icmp_sep=1109 Redirect Host: (New nexthop: 192.168.1.1),
I am not able to connect Internet from my Client system.
View 4 Replies
View Related
Mar 14, 2010
I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf):
Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw
Lun 0 Path=/dev/sr0,Type=blockio
#I've skipped commented lines
[Code]....
what's wrong with my config/iSCSI target/whatever else? Or, in short
View 1 Replies
View Related
Nov 19, 2008
OS:
Red Hat ES 5.2
Kernel:
2.6.18-92.1.18.el5
Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global]
# Server name
server string = Intranet Server (Primary)
# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name.
workgroup = intranet
# Security mode. (See SAMBA documentation for details.)
; security = user
# Restrict conections to specific IP addresses.
hosts allow = all
# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10
# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody
[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet
/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.
Has anyone come across this problem in the past?
View 3 Replies
View Related
Feb 24, 2010
I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
View 1 Replies
View Related
Sep 15, 2009
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
View 1 Replies
View Related
Jun 29, 2010
I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies
View Related
Jan 20, 2010
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
View 7 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
Sep 10, 2010
I'm running Lucid on a laptop client and a desktop server. The server has windows partitions that I'd like to connect to from the client using nfs over a wireless link on my home network. Is this possible? (I'm currently using samba but find it slow and stalls shutdowns on the client.)I've successfully connected to ubuntu partitions on the server via nfs, but most of the data is on the windows partitions, and must remain there.
View 4 Replies
View Related
Mar 31, 2011
Unable to connect windows with ubuntu on one single machine
View 1 Replies
View Related
Dec 20, 2010
I have a machine with Windows 7 Ultimate with several shared folders. Then I have VMWare with Ubuntu 10.10 as guest running. Samba runs in Ubuntu and in Windows, I can see the shared folders of the Ubuntu guest (read and write) as well. This morning I saw the shared folder of the Windows host and I could still open it manually in the Ubuntu guest. After this, I wanted to mount the folders permanently with fixed entries in the /etc/fstab. This failed and now I can't see the folders of the Windows host in the Ubuntu guest..
View 3 Replies
View Related
Feb 14, 2010
I have a network of 5 Windows Machines and 1 Linux Server. I created a Filemaker Pro Database on a windows machine and share it with the other machines through web publishing (only locally). - On any Internet browser, they only have to go the IP of the computer hosting the database - http://192.168.1.99:120 to enter & use the database, and all the other windows machines connect perfectly.
However, when I type the same IP(+port No.) into Firefox on my Linux computer, it can't reach the windows computer with the database (It just times out). Is there a firewall preventing it from connecting to other computers on the network, or do I need to update firefox or run another Internet browser or install Samba? I don't have much experience with Linux, as a programmer set the server up for me, so a simple solution with as little programming as possible would be fantastic.
View 6 Replies
View Related
Dec 2, 2009
I have Samba PDC server on CentOS 5..we have 10 thin clients in our network which were working fine previously with the windows Terminal services... Now i have replaced my windows 2003 Domain to Samba Domain Controller.. Is there any why i can connect our thin clients with SAMBA DC in the our environment?
View 2 Replies
View Related
May 2, 2010
I am trying (desperately) to setup freeNX so that I can access my Mandriva box from my Macbook over my network. I have great need to be able to do this. Here's the necessary info for you: Mandriva PC: running Mandriva 2010.0 with freeNX installed from the Mandriva repos Macbook: running OS 10.4 with the Nomachine NX Client installed Now, I have followed the setup from the Mandriva wiki as well as the freenx wiki to no avail. I simply cannot connect the Macbook's NX client to the server. I get an authentication failed message. However, I can ssh from the Macbook to the server just fine (that's how I'm getting most of this work done).
[Code]...
View 3 Replies
View Related
Jun 14, 2011
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
View 6 Replies
View Related
May 29, 2011
I installed the Syncrify server and client on a Linux box. From what I've read on their site, Syncrify comes with a built in self-signed SSL certificate. However after setting the SSL port on the Syncrify Admin Set-Up, I am still unable to login with a client through SSL. This works: (5800 is the default port for HTTP)[URL]...
However the following do not work:[URL]...
View 1 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Apr 15, 2010
Client unable to listen to NIS domain server.I have configured an NIS server, which is working fine.I then configured an NIS client to share some like passwd, shadow, etc.By default the client was trying to communicate to the NIS server using the broadcast method..However if I restart the client computer, it fails to communicate or Listen to the domain server. Once I login to the pc, I then check the /etc/yp.conf file and it switched back to the broadcast method.Is there any way that I can make this entry: domain naman.com server station51.naman.com permanent so that even after the reboot it should communicate using the client-server connection rather than the broadcast connection.
View 8 Replies
View Related
Jul 12, 2010
I have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies
View Related
Sep 15, 2009
How to setup remote control on Ubuntu 9 for use of windows client ?
Just for use in a home network.
I've had a computer for media files for a long time and now I changed from Windows 2000 to Ubuntu 9.
I the home network there is some Windows W2k and XP Home and I will use VNC or RDP for remote control of this Ubuntu desktop.
I've no experience of Linux at all and I've seen some notes about this with no luck.
View 1 Replies
View Related
Sep 25, 2010
I have NIS and NFS Server in Linux EL5 and i want to make client as windows..How to make windows as client for Linux server..Can any one explain me more detail.
View 3 Replies
View Related
Aug 31, 2010
What is a good example of an Open Source IRC client for Windows or Linux? If not, something free and extensible will do.The reason I would like this to be open source is that I wouldn't mind being able to understand how the message formatting is implemented in such a project.
View 5 Replies
View Related
Jan 29, 2011
How to configure a syslog client on ubuntu I don't have a syslog.conf file in ubunut client.also how to transfer log from windows xp to syslog server
View 1 Replies
View Related
Jan 21, 2010
i m working on roaming profile where linux is the server & windows is the client... i m implementing it using samba as pdc my linux version is 2.6.27.5-117.fc10.x86_64 but my samba server is not working windows is not authenticating my domain name following is the copy of my smb.conf file
Quote:
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
[code].....
View 52 Replies
View Related
Mar 1, 2011
Last week I installed Ubuntu 10.10 on my system in dual booting. I had installed succesfully both but unable to see data files from windows OS. Though I have excercised the options in various resources available on internet/blogs. System takes about 03 hrs during installation process. I am also unable to configure Thunderbird.
System hardware info is as -
System ManufacturerVIA Technologies, Inc.
System ModelKM266APro-835
System TypeX86-based PC
[code]....
View 8 Replies
View Related
Jun 9, 2010
I've worked exclusively in Windows. I can handle that.I've worked exclusively in DOS (a long time ago!). I can handle that.I've worked exclusively in Unix.I can handle that.Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY.
I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux).My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY).My productivity drops dramatically when I cannot hit Undo, Home or End.The Solution I am Seeking
An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them.Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface.need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them.I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.)I know there are many SSH clients, but I am looking for advice for a particular need.PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite.Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?
Update: After seeing the early answers here, I turned my requirements into a blog article, which may give more background in the direction I am looking.
View 4 Replies
View Related
May 20, 2010
I set up rsyslog for the first time on my sole Linux server (Debian Lenny), and I am using one PC to test it over the next few days. I currently have the Windows syslog daemon disabled so only the client is active.Before I recommend using it to collect logs from our production servers, has anyone heard of or had any problems with Syslog for Windows (URL...) running on XP/2003/etc? From what I've read is that since it sends the data over the network using UDP instead of TCP or an NFS mount, there should be no potential for problems.
View 2 Replies
View Related
Jun 6, 2011
Is it possible to access windows network printers from a VirtualBox WindowsXP client running under Ubuntu 10.10 host? The networking type is NAT. Would Bridged Networking solve the problem? If so, is there a tutorial on how to set up bridged networking for virutual box?
View 1 Replies
View Related
