General :: Unable To Connect Internet From Client System
Jan 28, 2010
I have Cisco Switch 2960, and it has been configured with dhcp (from 192.168.43.31 to 192.168.43.) and all my client connected to It. I have a modem and Its IP is 192.168.1.1, I used Fedora Linux system in between Modem and Switch , and made IP forwarding (Only one ethernet port is avaliable in Fedora Linux System), so that I can use the Internet through out the LAN. But When I try to ping modem form client system, I get an message
icmp_sep=1109 Redirect Host: (New nexthop: 192.168.1.1),
I am not able to connect Internet from my Client system.
View 4 Replies
ADVERTISEMENT
Jun 10, 2011
I have installed Linux 5.6 in my home PC, i tired to use internet connection its failed to connect. Whereas i am able to work in windows XP.
In Linux:-
i am not able to ping any sites.
i am using BSNL Broadband connection.
i have enable the option DHCP (IN DNS Configuration) to obtain an IP automatically from the ISP.
/etc/resolv.conf file looks like
search localhost
nameserver 192.168.1.1
View 5 Replies
View Related
Mar 1, 2011
I Have Installed Ubuntu 10.04 according to the steps mentioned in the following pdf [URL] the problem is after installation i am unable to connect to internet. i have connected internet on LAN but cannot detect it on console. unless i update the system i cannot get GUI.
View 9 Replies
View Related
Aug 13, 2010
Until today I have never encountered problems taking over my old Windows-machine. But now it doesn't work anymore... Could it be that something changed with an update of my Ubuntu (10.04) which caused this?
The Windows machine does not update or change, and I cannot imagine that I changed something myself at that machine...
I can still reach it using "smb://192.168.1.33/"
But when I try Remotedesktop Client with that IP it gives the message;
Error (grdesktop)
Autoselected keyboard map en-us
ERROR: 192.168.1.33: unable to connect
When I try using Terminal Server Client (I read in another thread that could solve the problem) I get the same response...
Where can I find out what the problem is?
View 1 Replies
View Related
Feb 1, 2011
Iam using suse linux desktop 10.0. when i connect tata photon USB modem for internet, the system recognises the USB device but unable to connect to internet. How to use tata photon in suse linux
View 3 Replies
View Related
Mar 21, 2010
I am unable to connect to the internet. I have Motorola Netopia DSL (NO router) and can't connect to the internet in ANY linux distro (openSUSE, fedora, slax, mandriva, simplymepis, mint, dreamlinux, ubuntu, ubuntu studio, artist linux). The only linux distro that works right away is backtrack linux 3. All other distro do not work including new back track linux 4 because in version 4 they switched to debian. My ISP is Bellsouth and they do not want to cooperate. I was told they do not support linux.
DSL shows internet and activity lights green but it does not connect.It seems to me problem is in eth0 because when I go to terminal and ifup eth0 it gives me can't assign requested address. I have dynamic DHCP and can't assign static address.I have 2 questions:
1.- How to connect to the internet?
2.- As I said above backtracklinux 3 works out of the box but doesn't have flash.How to install flash in backtrack linux 3 so I can play chess on Yahoo games and [URL]?
I run all linux distros from live CD/DVD from external DVD drive except fedora which is on C: drive.I did try to run already network devices, dsl configuration without any results If I can go to my modem thru browser address 192.168.1.254 I would be able to solve the problem but I always get message can't connect to server.
View 8 Replies
View Related
Jan 8, 2010
i am not able to connect to internet in red hat enterprise linux 5.2 but i have a connection in windows 7 and its working wid same settings..i have taken following steps:
1. neat-tui
2. entered the ip, subnet mask, gateway
3. vi /etc/resolv.conf
nameserver serveraddress
nameserver serveraddress
4. service network restart;chkconfig network on;shows every thing ok..
5. launch firefox shows the error message: address not found firefox can't find the server at [URL]
View 2 Replies
View Related
Nov 16, 2010
I have crunchbang lite 9.04.01 installed on an old laptop and I am very pleased with it. apart from one thing, I am unable to connect to internet as it is unable to detect my NIC.
lspci can detect it, see output below:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
[Code].....
I have tryed running puppy linux live usb to see if that can detect it but none of the modules worked, this may just be a coincedence though?
View 14 Replies
View Related
Jan 31, 2011
I'm an Ubuntu lucid user and i have AnyData adu 560d modem. i try to connect to the Internet using my modem, but ubuntu read it as usb, how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies
View Related
Aug 5, 2011
On the server having live ip address, I have installed vnc server using:
yum install vnc-server
yum groupinstall "X Window System" "GNOME Desktop Environment"
yum install xinetd vnc-ltsp-config
/sbin/chkconfig xinetd on
/sbin/chkconfig vncts on
/sbin/service xinetd restart
On my local machine connected to internet via LAN, I have installed vnc viewer using: yum install vnc When I connect to the vnc server using vncviewer ipaddressofvncserver:1 it shows unable to connect to host. No route to host (113)
View 3 Replies
View Related
Aug 26, 2010
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
Output of dhclient
View 2 Replies
View Related
Feb 10, 2010
I instaled vmware and created a virtual machine which is bt4. first of all i cant creat an user password and i log on with root second when i run the command airmon-ng i cant get my device name or anything caz nothing comes up under interface or i forgot what its caled.
View 3 Replies
View Related
Aug 11, 2009
My wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
View 1 Replies
View Related
Jan 23, 2011
This is my first attempt at a server, and I running Ubuntu 10.04 server. I had to reconfigure my network, so now I am attempting to use it as a server. I have a Linksys WRT54G2 connecting various machines-- Windows XP, Ubuntu builds, and LinuxMint 10 Julia.
The long and the short of it is that the server connects to the Internet-- I can get updates and install programs via terminal. The server also connects to the router, as tested by pings. The client computers all ping back and forth nicely, and I can access the file share via FTP from the local side and externally (this is part of a larger network).
How can I get it so that my client computers can access the Internet through the router and server?
View 3 Replies
View Related
Jun 20, 2010
i'm using redhat enterprise version, i'm facinh problem in wifi. i able to browse internet via ethernet but unable 2 connect via wifi and how to install applications.
View 2 Replies
View Related
Jan 5, 2010
I am a user or consumer of Knoppix 5.1 and Knoppix 6.2, I see in 6.2 version a very usefully tool, an icon in task bar thats help my internet connection in auto, even if I use a mobile modem like Huawei E160, I only select a 'Auto Mobile Broadband (GSM) connection' and, voila, internet is active. Into version 5.1 don't exist this option. I need to find packages like network-manager.... and all relatives and install in 5.1 in correct order to success.
View 2 Replies
View Related
Jan 25, 2011
I'm an Ubuntu lucid user and i have AnyData adu 560d modem.i try to connect to the internet using my modem, but Ubuntu read it as usb tell me how can i using usb mode-switch to solve this problem,in otherworld i know what is the problem but i need the steps to solve this problem .
View 1 Replies
View Related
Jun 4, 2010
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies
View Related
Apr 6, 2011
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
View 5 Replies
View Related
Mar 21, 2011
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies
View Related
Sep 24, 2010
i have installed Linux i.e ubuntu 10.04 on my PC in which i have installed pptp client and able to connect it successfully but problem is that it unable to browse internet. in windows it works fine.
View 1 Replies
View Related
Nov 19, 2008
OS:
Red Hat ES 5.2
Kernel:
2.6.18-92.1.18.el5
Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global]
# Server name
server string = Intranet Server (Primary)
# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name.
workgroup = intranet
# Security mode. (See SAMBA documentation for details.)
; security = user
# Restrict conections to specific IP addresses.
hosts allow = all
# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10
# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody
[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet
/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.
Has anyone come across this problem in the past?
View 3 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Apr 16, 2010
I have configured LDAP server on RHEL 5.2 Linux.
Client is unable to change its password from client linux box.
I think there is PAM configuration problem in /etc/pam.d/system-auth file.
What will be the exact entries in this file.
View 3 Replies
View Related
Jul 20, 2010
I'm currently using Ubuntu and have installed debian using dual boot. In debian neither my wifi card appers nor LAN interface appears. I think during installation I'm not able to install the drivers. Can anyone help me to download the driver packages for debian (than I can download in ubuntu and then use pen drive to install in debian).onsider that I'm completely new to debian and have been using ubuntu for 2 months now and is familiar with packaging.
View 12 Replies
View Related
Oct 15, 2010
Just installed Fedora 13 (64-bit). Brand new to Linux and not much of a computer expert.
As the subject line says, I am unable to connect to the Internet.
Things that I have already tried based on threads posted for similar problems:
* ping -c 5 www.google.com
unknown host www.google.com
* ping -c 5 74.125.159.105
Network is unreachable
I connect to the Internet via wired ethernet. The modem/gateway is 2Wire mod. 2701HG-B. Service provider is AT&T DSL. Ethernet controller is Realtek Semiconductor RTL8111/81688 PCI Express Gigabit Ethernet. When I go to System -> Administration -> Network Device Control it shows eth0 as inactive.
Network Configuration shows:
* Hostname: localhost.localdomain
* Primary/Secondary/Tertiary DNS: blank
* DNS Search Path: blank
I have no problem whatsoever connecting to the Internet when using Windows XP.
View 14 Replies
View Related
Jul 20, 2011
I've been using 3 different distros for the last 2 weeks. Ubuntu, Fedora and Mint. And i've been using Windows since I can remember. I won't talk here about the benefits I got with Linux, because everyone knows that. But there's something about Linux that keeps annoying me, no offence to Linux users, and I want to ask you about that.
It just seems impossible to install additional software without an Internet connection. I tried: Keryx, Opyum, Suhi,huh?, Synaptics generate download script, yum -downloadonly. I didn't yet: Debian 10DVD I'm not programmer, and my knowledge about computers and operative systems is very small. But installing software on Windows the worst case of dependencies i saw was I had to download just one more .exe file (.NET framework or klite codec pack installers, for example).
question: Is there any Linux distro or any way where packages are managed in a more compact fashion? Suppose I want to use Wine, how I download some megapackage with ALL dependencies or something like that? How system administrators manage where no Internet connection at all (if that possible)?
View 14 Replies
View Related
Dec 27, 2010
i just used wubi to install ubuntu 10.04 LTS. everything is smooth except i cant connect to internet. i get the wireless icon in the notification thing with a red exclamation point on it.ive tried two different wireless connections, the important one being a verizon Mifi 2200 intelligent hotspot (its not usb-style, look it up). no matter what wifi i try, nothing shows up when i click the internet icon in the notification thing.
View 6 Replies
View Related
Dec 31, 2010
I recently installed Ubuntu onto my computer. It was going great until i could not connect to the internet. I looked up the troubleshooting, and it didn't help. They all said to click on the Network Manager, which I did, but then it said to clock on "Wireless Networks" and select the network, however I was unable to click on Wireless networks, and there is no other way to connect to the internet! It isn't detecting my Wifi, and I am unsure of where to go from here.
View 1 Replies
View Related
Oct 1, 2009
I have been using Windows XP, and last month i had Linux Mint installed. I was connecting to the internet with an external modem and everything was running fine, until while experimenting with the settings,i bust the whole thing. What i did was to do a "right click" on the 'computer icon' at the bottom right-hand corner to disconnect and from that day i am unable to connect from Linux, but i can still do it under Windows.I had done the same thing under Windows but after going to the 'control panel/network settings' i managed to get the thing working.I went to the 'control panel' in Linux, and under 'network ' i get the message: "Auto eth0 => never". i have been trying to 'edit' the 'settings'
View 2 Replies
View Related
