OpenSUSE :: Login - Cannot Connect My Server With NX Client
Mar 20, 2010I have reinstall my server. I think everything was okey. But i can not connect my server with NX Client.
View 3 Replies
ADVERTISEMENT
OpenSUSE Network :: On O.S11.4 NX Client Can't Connect To X Server
May 22, 2011until 2 weeks ago I had o.S11.3 on both my Siemens and Asus laptops. I have installed NX No Machine. ( I know it's not open source,I am using the free version). With commandline ( root) /usr/NX/bin/nxclient I was able to connect to the other machines. I got Qt: Locales not supported on X server, the NX menu popped up and I was able to connect by inserting resp codes. After fresh install of o.S.11.4 on the ASUS the commandline (root) answers:
xlib: connection to":0.0" refused by server
xlib: No protocol specified
nxclient: cannot connect to X server:0.0
The ASUS can still be reached from the other machines (one with o.S.11.3,the third one with o.S.11.2 ) SSH ( Lan)connections are all working forth and back between the machines, even to and from Win XP, however only from Win 7 on the ASUS, but that's a Win7problem. Comparing the installed xorg-x11- server-extra : on o.S. 11.3 Additional X servers ( Xmdx,Xephir,Xnest,Xvfb ) ,on o.S.11.4 the Xvfb is missing, might that be the reason?
OpenSUSE Network :: Esxi Client Cannot Connect To Server
Jan 28, 2010So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies View RelatedOpenSUSE Network :: X11 Forwarding - Windows Client Works But It's Doesn't - Cannot Connect To X Server
Jan 20, 2010I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
OpenSUSE :: Can't Connect To Netware 3.12 Server Using Netware Client 1.1
Jun 29, 2011Can't connect to netware 3.12 server using netware client 1.1. in opensuse Linux.
View 1 Replies View RelatedServer :: Which Ftp Client Will Support Key Based Login?
May 17, 2010I have disabled password logins to a server.I want to transfer some files to it using a client like FileZilla but there was no way I could give private key to filezilla is there an ftp client
which supports key based login?
Server :: Proftp Can't Connect To Ftp Client?
Feb 3, 2011I am running CentOS release 5.5 (Final) with PROFTP installed.
I am able to connect to the ftp server from local, but when I try it from dream weaver CS5 it can't connect to the server. I ran a port scan and 21 seems to be open:
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
53/tcp open domain
[Code]....
Ubuntu :: Can't Connect To VPS Server Via NX Client
Oct 13, 2009I bought VPS Linux server, but i would like remote desktop thought NX Client. Firstly I installed on server ubuntu like this:
Code:
gpg --keyserver keyserver.ubuntu.com --recv-keys 493B3065 && gpg --export -a 493B3065 | sudo apt-key add -
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install kubuntu-desktop
Then I proceed as described in this tutorial:
Code:
[URL] but it's not work when I try loging to the server via NX Client. Then I try this tutorial:
Code:
[URL] but I don't receive public key (when I put this code sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2a8e3034d018a4ce) .
Ubuntu :: Could Not Connect To Jack Server As Client
Oct 10, 2010I got the following message when starting the Jack Control.
Could not connect to JACK server as client.
- Overall operation failed.
- Unable to connect to server.
Please check the messages window for more info
15:25:37.902 Patchbay deactivated.
15:25:37.903 Statistics reset.
15:25:38.020 ALSA connection graph change.
15:25:38.216 ALSA connection change.
15:25:39.777 Startup script...
15:25:39.779 artsshell -q terminate
sh: artsshell: not found
15:25:40.182 Startup script terminated with exit status=32512.
15:25:40.183 JACK is starting...
15:25:40.183 /usr/bin/jackd -R -dalsa -dhw:0 -r44100 -p1024 -n2
15:25:40.190 JACK was started with PID=2052.
no message buffer overruns
jackd 0.116.1
Networking :: VPN Client Should Not Connect To Special Server
Feb 16, 2009in my office all users connect to internet via VPN.in our office there is one special server that we want when users connected via VPN,users can not connect to the special server and when users are not connect to via VPN can connect to that server.
View 3 Replies View RelatedProgramming :: Connect A Client To A Server In Windwos?
Mar 25, 2010I am getting this error when i try to connect a client to a server in windwos ,anybody knows why ?
View 3 Replies View RelatedServer :: Client To Use On A MAC To Connect To An Openvpn Server?
Apr 26, 2010What client can I use on a MAC to connect to an openvpn server?
All the client s seem to use password connections whereas the openvpn server uses certificates.
General :: Email Client Fails To Login Mail Server
Nov 17, 2008I'm following [URL] to build a mail server running postfix virtual. The server is now running able to send and receive mails. But remote mail client 'Evolution' can't login the server to send/receive mails.
# tail /var/log/mail.log
Code:
Nov 17 09:00:32 xen05 postfix/smtpd[6601]: warning: xen0.satimis.com[192.168.0.110]: SASL PLAIN authentication failed: authentication failure
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Nov 17 09:00:48 xen05 last message repeated 3 times
Nov 17 09:00:48 xen05 postfix/smtpd[6601]: warning: SASL authentication failure: Password verification failed .....
Still fail: "Login authentication" and "plain authentication" same result.
Networking :: Login Multiple Client Pc On Using Via Openvpn Server From That Side?
Nov 24, 2010How to login multiple client pc on the same network using via openvpn server from client side
View 1 Replies View RelatedGeneral :: Connect Thin Client To SAMBA PDC Server?
Dec 2, 2009I have Samba PDC server on CentOS 5..we have 10 thin clients in our network which were working fine previously with the windows Terminal services... Now i have replaced my windows 2003 Domain to Samba Domain Controller.. Is there any why i can connect our thin clients with SAMBA DC in the our environment?
View 2 Replies View RelatedServer :: Openldap Client Fails To Connect Ldap Server 'ldap_bind - Can't Contact LDAP Server
Sep 28, 2010Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
Server :: Samba Login/passwd Client - Why The Users Id Arent The Same On Every Machines?
Feb 8, 2010I am encountering this issue:
Samba login/passwd client : why the users id arent the same on every machines?
So the client side config looks like this:
Quote:
/etc/pam.d/ files :
Code:
returns:
Code:
CentOS 5 Server :: Ldap - Ldapsearch And Getent Works From Client But Cannot Login
Jan 26, 2009So I've configured ldap on Centos5 64 bit and I can run "ldap search" and "gentent passwd" on the client/server and it shows my users info.
But I can't login via the cli or GUI.
I can login by doing;
su - username
at the client or server but I can't login by issuing;
login username
or at the GUI login screen.
Ubuntu Networking :: How To Connect To UWF's EDesktop Via Terminal Server Client
Jan 5, 2010More for my own posterity than anything else, I thought I'd document here the way to get to eDesktop through linux (debian, ubuntu) at the University of West Florida (UWF), since they appear to only support Windows through their documentation on the University web site, and the link through Argus (the secure web site) doesn't work in Linux. This is sometimes needed to use the University resources (libraries and computer programs) from remote locations, and otherwise a google search is fruitless. I had to have a guy in the computer science department show me how to do it.This may apply for other Universities with similar setups.
View 1 Replies View RelatedUbuntu Servers :: Client Can't Connect To Mail Server / Get It To Work?
Nov 19, 2010I followed this tutorial:
http://www.howtoforge.com/virtual-us...l-ubuntu-10.04
Minus the Quota for the mailboxes, since I don't really care about that. But I don't think that should cause any problems in the configuration.
The server is in my local network.
I tried to connect with Thunderbird and Kmail. Kmal brings up an error message eventually, saying something about a time-out.
Squirrelmail says code...
I searched everything & everywhere only to see that more people have that same error message come up with Squirrelmail. From my understanding some have fixed the issue but I couldn't actually find a solution to this.
Does anyone know how to fix this?
General :: Calling All FreeNX - Cannot Connect The Macbook's NX Client To The Server
May 2, 2010I am trying (desperately) to setup freeNX so that I can access my Mandriva box from my Macbook over my network. I have great need to be able to do this. Here's the necessary info for you: Mandriva PC: running Mandriva 2010.0 with freeNX installed from the Mandriva repos Macbook: running OS 10.4 with the Nomachine NX Client installed Now, I have followed the setup from the Mandriva wiki as well as the freenx wiki to no avail. I simply cannot connect the Macbook's NX client to the server. I get an authentication failed message. However, I can ssh from the Macbook to the server just fine (that's how I'm getting most of this work done).
[Code]...
OpenSUSE Network :: Error - Cannot Connect To Core Client
Oct 5, 2010I recently donwloaded boinc and every time I launch I get this error "cannot connect to core client." I went through the guides and opened port 31416 in external zone, am I doing this right? The guide said to put it in the DMZ, what's the difference?
View 3 Replies View RelatedSoftware :: Unable To Connect To Samba Share (XP Client, RHES5 Server)
Nov 19, 2008OS:
Red Hat ES 5.2
Kernel:
2.6.18-92.1.18.el5
Samba version:
[root@intranet samba]# rpm -qa |grep samba
system-config-samba-1.2.39-1.el5
samba-common-3.0.28-1.el5_2.1
samba-client-3.0.28-1.el5_2.1
samba-3.0.28-1.el5_2.1
When I try to connect to the share from my XP machine, I get a "network path cannot be found" error message.
Below is the entry in /var/log/samba/samba.log
[2008/11/19 11:57:51, 0] smbd/service.c:make_connection_snum(1003)
'/server2/test' does not exist or permission denied when connecting to [server2] Error was Permission denied
Here is my smb.conf file:
[global]
# Server name
server string = Intranet Server (Primary)
# These are the default password settings.
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# Define NT domain/workgroup name.
workgroup = intranet
# Security mode. (See SAMBA documentation for details.)
; security = user
# Restrict conections to specific IP addresses.
hosts allow = all
# The %m variable sets a separate log file for each
# connecting machine.
# log file = /var/log/samba-log.%m
# Keep it basic - one file!
log file = /var/log/samba/samba.log
# The number of minutes inactivity before a connection is
# disconnected. (This disconnection should be transparent to most
# clients, which an have auto-reconnect feature. Removing inactive
# connections is to preserve the server's resources.)
deadtime = 10
# These socket options are suggested in the default smb.conf file.
# Who am I to disagree?
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Define both Ethernet interfaces. (Otherwise, I suspect only one
# will be configured??)
interfaces = eth0 eth1
username map = /etc/samba/smbusers
; guest ok = no
; guest account = nobody
[server2]
comment = server2
path = /server2/test
write list = @intranet
force create mode = 775
force directory mode = 2775
writeable = yes
; browseable = yes
valid users = intranet
/server2 and /server2/test are owned by user intranet and both directories have permissions set to 777.
Has anyone come across this problem in the past?
CentOS 5 Server :: Openvpn Connect To Samba Share From Windows XP Client?
Sep 15, 2009I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
Ubuntu Networking :: Make Connect To Freenx Server From Windows Using Nomachine Client?
Feb 24, 2010I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.
https:[url]....
https:[url].....
But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg
I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.
nxssh: <host-name>: no address associated with name.
how to make connect to freenx server from windows using nomachine client?
Software :: Cafe Con Leche Client / Does Not Connect To Server To Show The Timer Automatically?
Jun 2, 2010i have a problem with one of my PCs which refuses to run the CCLc timer on its screen, i have tried to run the application so many times but every time i run it it does not connect to the server to show the timer automatically as the other PCs do,therefore the client cannot know how much he/she is supposed to pay.this forces us to manually time the clients that are using that PCs.
View 1 Replies View RelatedUbuntu Servers :: 11.04 LTSP Connect Client Hard Drive - Register In The Fstab On The Client?
May 26, 2011I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies View RelatedUbuntu Servers :: Setup A Webmail Server / Suitable Client To Connect To It That Is Compatible With Windows?
Jun 29, 2010I would like to know how to install a webmail server and a suitable client to help connect to it that is compatible with both windows and linux ubuntu.
View 1 Replies View RelatedServer :: LDAP Server Vs Client / Export Server's Home Directory To The Client?
Jun 11, 2011I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
OpenSUSE :: FIrewall Setup / Client Computer Cannot See NFS Server When Scanning For Server - OSE 11.2?
Apr 21, 2010I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....