General :: Unable To Login As Root Or User
Jan 29, 2011I am trying to someone get to their records on a CentOS 5 box and the username/passwords they have given me are not being recognized.
View 11 RepliesI am trying to someone get to their records on a CentOS 5 box and the username/passwords they have given me are not being recognized.
View 11 RepliesAfter upgrading FEdora 13, user ravi was added. Then after few days neel was added. Both of the users were already existing. So when attempting login to neel, we found that every file is owned by ravi. So we did$chown -R neel:neel But after that problem started and when we rebooted the machin, there were no list of users on login screen. (then I connected to that comp remotely, it worked, but somehow I was not able to switch to root) It says incorrect password (though I new it very well). So I went to maintenance mode and changed the root password, and rebooted. Still problem persists.Now I am not able to login as root (from anywhere, login screen , terminal, remote)No list of usernames on login screen ( but i can choose, other and type login-password)
View 5 Replies View RelatedI have just upgraded my laptop from F8 to F10, and I am unable to login to the system as root user.At login, it provides 2 options, one is the user I created and another called 'other'.On selecting 'other' and providing uid/passwd as 'root/<rootpassword>, it says "Unable to Authenticate User"!!However, when I tried to access my windows partition, it happily accepted the root password
View 4 Replies View Relatedhere is Maneesh Kumar Dhiman from india persuing B.Tech in computer science and Engg. i am using ubuntu 9.04 and i have the problem with it that i cannot being able to update it by following ways:
1. by using snaptic package manager
2.by using update manager
3.by terminal commands and also i have a problem with U9.04 n that is i can not being able to login from user screen as a root.
i just installed linux mandriva 2009. i set password for root and created a user account. when i try to login as root, after logging out as user, it does not allow me and gives the error "root logins are not allowed". even it does not show the root account. if i try to go to root from konsole terminal using su root, it allows to enter as a root but when i try to start the GUI with startx it gives error.not sure what to do and why i can't see my account in GUI mode
View 5 Replies View RelatedNot able to login to a user account, even after clearing the password from root using passwd -d
[root@ivrsdb1_pnq /]# passwd -S oracle
Password locked.
[root@ivrsdb1_pnq /]# passwd -u -f oracle
Unlocking password for user oracle.
[code]....
Having installed Debian 7 on an old machine from a Liinux Format Magazine DVD I was unable to log in as a specific user. I can login as root and use useradd etc but when I logout of root I still cannot login as a user and nor will the machine accept my root password. I have to shutdown and reboot to get back into root. I'm using O'Reilly's Linux Pocket Guide from 2004 for the commands. Could it be that things have changed?
View 9 Replies View RelatedI want to disallow root login on my RHEL Machine?
View 14 Replies View RelatedI have been trying to establish a connection between two pcs via the ssh channel. I successfully made the connection as a root user, but when i tried as a non root user i had to type in the password the make contact with the other pc. how exactly does this passwordless login actually work?
View 3 Replies View RelatedDoes any body knows how to disable the root login to the GUI , like i am running my redhat server on runlevel 5 and i dont need tht root to get login to the GUI , i ma talking about redhat 5.
View 2 Replies View RelatedI'm not able to login as a root through ssh but i'm able to switch as a root user once i get into the Debian boxI already modified /etc/ssh/sshd_config to PermitRootLogin Yes and restart the ssh service
View 3 Replies View RelatedI am using CentOS. When i try to login as root using login command,i get the following:
Code:
[avi@localhost ~]$ login root
Password:
[code]...
I am unable to login as root to a linux machine through SSH. Login through console is working fine. SSH is not working only for root user. It is working fine for other users. I have checked the sshd_config file and it says:PermitRootLogin yesI'd be grateful if somebody can give an idea about what is going wrong.
View 15 Replies View Relatedi am looking for a detailed description of the login process for both root and normal user , also locally and remotely.i read some sentences that the files .bashrc and bash_profile are needed for this process. But that was very concise.
View 9 Replies View RelatedI want to set security regarding with the root user. The root user must not be allowed to login directly to the service console, how will I do this?
View 4 Replies View Relatedi am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies View Relatedi am not able to do root login even from terminal also. I was trying to block remote login through this ........
>>How can we prevent the "root" account from remote logging in via SSH
>>and Telnet but still permit root-equivalent personal accounts to log in
>>remotely?
[code]....
after this i am not able to make root login from su as well.
I have a Linux machine which I set up for my personal use at home. I installed Fedora Core 11 a long time ago, and recently I noticed that I am not able to log in as root (I didn't realize this issue until recently since I always have been logging in as a user account that I created during the FC11 installation).When I login as a user account instead of root, I can use the su command with the password I set up for the root account. Even when I'm in GUI mode and try to make changes to the system from the user account, the GUI asks to enter the root password, and I type the password I set for root and it works. However, if I boot the machine and try to log in the system as root, password that I set up is rejected.
I'm very puzzled with this problem because with my limited knowledge on Linux system, I thought the root password and the su password are the same (i.e. when you install Linux OS, you set the root password, and you use the same password for using the su command). I do not know exactly when this problem started, but the only thing that I can think of as a cause of this issue is that I once changed the root password from GUI using System > Administration > Root password since the system one time complained about the low security strength of the root password.
I was unable to change the permissions for root node and for other users also. WE have tried all the possibilities like chmod and chmod -R 777 filenem. But we are unable to change that.
View 4 Replies View RelatedI downloaded Gentoo and burnt it on CD.I did boot the livecd and the system passed starting stage and it recognised my hardware. After that, there islivecd login prompt, and obviously I tried to use root and no password but it says login incorrect. This is what I did:
Code:
livecd login: root
Password: [hit enter here]
[code]....
I need to edit the system time as a not-root user. I am carrying out the following actions in my program.
1. Read the User Id of the process. User_ID= getuid()
2. Printing Capabilities(Permitted, Efffective, Inheritable)of the process
3. Setting UID = 0, using setuid(0)
4. Calling the prctl(), function to keep capabilities
5.Switching the UID from root to User_ID of the process
6. What we have now is a process with root capabilities as a non root user
7. On printing Permitted, Effective, Inheritable capabilities, I get the following
--> Permitted = 0xfffffeff = Effective
Inheritable = 0x0; with UID = 1001;
8. I then try and set the system time with --> system("date -s 10:00");
9. I get an error: date: cannot set date: Operation not permitted
10. I am unable to understand as to why I cannot set the time even thought the capability bit CAP_SYS_TIME in the Permitted and Effective sets are SET.
I edited the passwd file to modify the default shell for root from bash to tcshnow when I try to login to root it gives me the following error:"su: /bin/tcsh : No such file or directory"
View 3 Replies View RelatedWell I did something pretty stupid and now I can't log in with my user other than the root user. Basically, I wanted to change my username and so I when to the admin > user & accounts - and selected the account I wanted to change. Anyway I did that and then logged out. Since then all I get when I reseted is a spinning mouse ball and a black screen. I can get into the shell prompt - but I'm not sure how I'd go about fixing this issue I created. At the moment I'm logged in the shell with root, and if I type 'id' I can see my old username, but I think the links behind it are broken.
View 5 Replies View Relatedhow i know am in root user or another user? how to login as root user? sudo passwd root when i typed in termninal am getting this error pa1 is not in the sudoers file.
View 2 Replies View RelatedI created a new user lets call it X. I disallowed the root login from SSH, so I login with X and after I call "#su root" command. But when I login that way, I can't use some commands like "service". I can access all the files, I can even change the sshd_config file but some commands say "not found". Do I need to get X to a group? Or make it some priveledges etc? What should I have to do to run this free of problems?
View 4 Replies View RelatedSince upgrading my Debian/unstable amd64 installation a few days back I can no longer log in as either root or user, whether to SDDM, via the console, or via ssh. When trying with the console, I can see the login message flash briefly on the screen, before the console resets itself.
I can boot into recovery mode, and examine log files. I enabled systemd debug logging and, amid reams of messages, these seem the most pertinent:
Sep 25 02:24:43 cooler systemd[1]: Received SIGCHLD from PID 937 (login).
Sep 25 02:24:43 cooler systemd[1]: Child 937 (login) died (code=killed, status=6/ABRT)
I have a problem, I have installed Fedora 11. And i need to login as root user.
How to do so?
I've recently upgraded my hardware. Now, the system boots perfectly fine, but I can't login to the tty as root or any other user. Infact yes, I can login, but as soon as it shows Last Login, it exits and then I'm back to a login prompt. I've successfully booted into single user mode, and changed all the passwords, but still it fails. X doesn't start, although I think it's due to the old xorg.conf having the wrong driver.
View 9 Replies View RelatedI cannot see what the problem is here. I have installed MySQL 5.1.36 via YaST on my openSUSE 11.2 (32-bit) system.I can log in as root. I can "create user MY_user identified by 'my_passwd';" and a new user is created. But I cannot log in to the database using that new user name. I keep getting the message:
Code:
> mysql -b -u MY_user -p
Enter password:
[code]....
I have two uesers on the syste - me (Adam) and the root. when I log in as root where is the admin user contents? in windows its under users. in suse it should be under users. but where?
View 2 Replies View Related