i have not mastered the finer art of installing drivers. I am trying to install a tp-link wireless adapter tl-wn321g which are green lighted but since i don't know how to install the driver.
View 6 RepliesI'm trying to connect from my desktop to my router (Networl WGR614v6). It seems to recognise the card, but I can't get a connection. I want to run this machine as a server, which is why I'm using commandline, but I haven't had any luck through the gui either. I've disabled NetworkManager and verified that it's not running. Here's what happens:
Code:
$ lsusb | grep -i wire
Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
[code]....
I recently got a Tplink TL-WN321G wifi device for my fedora box. It has a Ralink chipset rt2870 in it.After messing it with couple of hours, i got it working with rt2800usb firmware, the LED is blinking on it and the device is listed in available...but its not scanning for available networks..lsusb:
Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
download and instal tp link wn321g wireless adapter for ubuntu
View 1 Replies View RelatedI just buy a usb wifi and I am trying installing it. TP-LINK TL-WN321Gsusb
Bus 004 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapterhere I can see that is need driver rt73. I have it in synaptic.I installed these package: firmware-ralink, rt73-common, rt73-module-2.6.26-2-686My kernel is:Linux Miros-main 2.6.26-2-686 #1 SMP Wed Nov 4 20:45:37 UTC 2009 i686 GNU/LinuxI have installed wireless-toolsI have Wicd installed.iwconfig iwconfiglo no wireless extensions.eth0 no wireless extensions.
i have a usebe Wireless TL-WN321G and i search driver for him and how i can install it without connection on the internet.
View 9 Replies View Relatedmy mate "polish dave" came round and hooked his laptop to my network 02wireless with WEP enc, using backtrack he had my password within 15mins.. now i want to copy him and see just how easy it is my 'acer aspire one' comes with a built in atheros ar5b95 wireless (useless) that i cant get backtrack to find.. i bought a tplink usb and now i cant get that to show up either.
View 4 Replies View RelatedI don't know how to install TP-LINK TL-WN7200ND drivers for Ubuntu 11.04. I have a clean install of Ubuntu 11.4. I download drivers from here [URL]2 but I don't know how to install them.It must be like for dummies because I don't have enough knowledge about Ubuntu.
View 5 Replies View RelatedI was wondering where to find the drivers for my D-link adapter. It says on the box that it has Linux support, what does that mean? I have already used it without any drivers and it works for a bit but after a week or something it doesn't work anymore (it is connected to the network but no download). What should I do? Would installing the drivers solve the problem?
View 3 Replies View RelatedI have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.
pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver
pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all
sudo: unable to resolve host paghomelinux
[code]....
i try to install my d-link dwl-g520 h/w:A1 in master mode with madwifi drivers but:
$ lshw
*-network:1
description: Wireless interface
product: Atheros AR5001X+ Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 5
bus info: pci@0000:00:05.0
[Code]...
I am trying desperately to get my wireless n adapter to work. I had it running sporadically with ndiswrapper for some months now (it was always unreliable). Now I was very optimistic, when I found new driver sources from Realtek directly: Realtek I understand the DWA-131 is based on the Realtek 8192su chipset. Unfortunately the build fails:
[Code]...
I recently upgraded to Fedora 14. I tried installing gcc using yum. But it seems there is a broken link. I get the following result:
Code:
You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest
So i tried using --skip-broken
Code:
If i try to install glibc, i get the following message:
Code:
I also tried to install it using Menu-> Administration -> Add/Remove Software, but i get the same error.
i just tried to install th ecatalyst 10.12 (ati-driver-installer-10-12-x86.x86_64.run) using sudo bash but i keep getting this error in the log:
[Message] Kernel Module : Trying to install a precompiled kernel module.
[Message] Kernel Module : Precompiled kernel module version mismatched.
[Message] Kernel Module : Found kernel module build environment, generating kernel module now.
[code]....
When I had a wubi install(after I restarted, logged in, etc.) a little icon appeared in the top right-hand corner of the screen informing me of an nvidia driver update, which was required to run compiz desktop effects. Now I have ubuntu installed on an actual hard drive(wubi was deleted beforehand) and I get no such icon. So I'm wondering how to update my drivers. BTW I have a 9500GT
View 2 Replies View RelatedI have been using Linux for over a month and have gone through several books on it. My weak point in linux is system internals and the kernel, (which I am reading up on now). I am a computer scientist and so I am computer savvy, but have not had much experience until recently with linux. (I was a windows guy, but Ubuntu 10.10 has changed my opinion) I am trying to install drivers for the alfa networks wireless adapter AWUS036H. I followed their online manual and I didn't get very far. After looking at the error messages then I assume it is a kernel issue. Here is the error messages I get when I am trying to make the program:
steven@steven-Satellite-A100:~/Downloads/Software/Wireless_Adapters/AWUS051NH/Drivers/RT2870_LinuxSTA_V2.3.0.0$ sudo make
[sudo] password for steven:
make -C tools
[Code].....
The open source drivers don't work with HDTVs right so I needed to install ATI drivers
Im so upset because I FINALLY got Kernerl 3.0 working, but now recovery mode won't even work with the ATI drivers
I installed driver 11.8, my card is a 5770. Is there anything I can to do boot it up and somehow remove the bad drivers?
I've been trying to install all the drivers for my laptop that I recently installed Ubuntu on and I've been having trouble installing the driver for my webcam.
I followed the instructions on Ubuntu Documentation > Community Documentation > Ov51x (sorry but I can't post links) but I'm having trouble with preparing the installation files with the "make" command.
This is the message I keep getting:
(See attached picture)
Also, as an aside, I often get the message when I'm trying to install a package that it is "Unable to locate pack ______".
I'm reasonably new to Linux and very new to Ubuntu . I've just installed 9.10 as a dual boot on a Windows XP Pro Dell Inspiron 9200. I have a Samsung CLP-315 that I need to configure first as a local printer then as a wireless network printer. I found the software (.bin file) on the Samsung site and downloaded it but that's as far as I got. Can I use any of the GUI package managers or do I need to use Terminal and command line syntax? Here's the real question "what is the syntax for installing software/drivers?"
View 3 Replies View RelatedI've got an old Gateway desktop machine that a friend gave me, but any time I try to do something in a window-based environment like GNOME or KDE, the system locks up. I'm under the impression that this is a driver issue since the ethernet and video are integrated on the motherboard and neither works appropriately.
I cracked the case and got the number for the motherboard, which is: 4000811. From here I'm not quite sure what to do to make sure I've got the right drivers for the motherboard in place and could use some I'm on 10.04 server and ONLY have access to a command line.
installing the drivers for my wireless adapter. An azio awu101n. I am running ubuntu 10.04 . I get all kinds of errors when i make the driver.
View 2 Replies View RelatedUbuntu's logo is to big after installing Nvidia drivers, how can i fix this?
View 4 Replies View RelatedI've been trying to install the proprietary ATI drivers from the .run file from their site as per this link [URL]
I can follow the steps perfectly until step 16, at which I am informed that the command aticonfig is not found.
I have a Mobility Radeon HD 5470 graphics card.
Three times so far I have had to re-install ubuntu because I installed an updated or new Nvidia graphics driver for my GeForce FX 5200 The first time, using Natty Narwhal, I installed an updated graphics driver, and upon reboot, I was presented with a blank screen that did nothing. Being a first-time Ubuntu user, I assumed it was me, or a bug in the new release. So I burnt a Lucid Lynx cd on another pc, and installed that instead. Same problem when I installed a new graphics driver, again via Admin>>Hardware Drivers. Reboot yielded a blank screen. Booted from cd again, as I had no files yet to worry about, and everything seemed to be fine, providing I stayed away from that tempting hardware drivers button.
I then accidentally installed a new driver when installing the dependencies(via terminal) for OGRE (Object-Oriented Graphics Rendering Engine) This time, my terminal froze, Firefox wouldn't boot, and a reboot yielded a blinking, blank login screen that did not do anything. Obviously, I'd like to have a graphics driver, as currently I can't run anything that needs 3d acceleration (Games, 3d simulations, even Desktop effects), but it's not absolutely necessary. So if nobody can suggest a fix, short of a new computer, new graphics card etc, can anybody suggest a way that I can stop myself accidentally installing anything driver-ish? The driver worked fine on windowsXP, but there's two reasons I'm not going back to that: a) I hate it. Hate, hate, hate.b) I've lost the activation key that came with computer, so I can't reinstall.
Further detail can be provided on request. Computer is Dell Dimension 2400, 256Mb RAM, Hard drive is almost empty. Old and slow, but I like it.
I was looking for live link to download ubuntu mobile but unfortunately I don't find anything... Can someone send me a link for download and a link with the installation instructions ?? All the links that I found are dead.
View 9 Replies View RelatedI have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
i installed fedora 12 on my pc and I also installed the ati drivers from ati and i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 2 Replies View Relatedafter installing the NVIDIA propriety drivers for my 8600 GTS, the loading screen that is shown when booting ubuntu is low quality. Does anyone know how to fix this,
View 9 Replies View RelatedI cannot get my Sabrent USB wireless adapter to work, please help me as I am a beginner in Linux! In their readme, they have two methods:
1.) Compiling a driver from the source code, but they do not give any instructions and I am lost on how to do that.
2.) Copying the firmware files directly to the lib/firmware folders. I did that but when I ran sudo ./wlan0up and sudo .wlan0down, but everything I do results in a "Could not get interface for wlan0"
its pretty much my first install. I am duel booting with Vista. I followed the guidelines and made a partition for my Ubuntu install. Everything installed correctly, however, it tell you to activate drivers for my video card, then restart. After restart ubuntu will not boot, it just sits at the startup screen and does nothing, I waited like an hour just to make sure that it was not just installing more things. I have re-formatted my partition and am going to reinstall later. Oh, I installed 10.4.1.
View 4 Replies View Related