I'm running Kernel 3.0 and i cannot use my TP-Link TL-WN821N v2. # lsusb Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
[Code]....
ifconfig wlan0 up doesn't work. With kernel 2.6.39 I can use it.
WiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
my mate "polish dave" came round and hooked his laptop to my network 02wireless with WEP enc, using backtrack he had my password within 15mins.. now i want to copy him and see just how easy it is my 'acer aspire one' comes with a built in atheros ar5b95 wireless (useless) that i cant get backtrack to find.. i bought a tplink usb and now i cant get that to show up either.
View 4 Replies View RelatedI see this at boot:
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
fbcon: inteldrmfb (fb0) is primary device
[code]....
I recieve the following error:
Cannot find swap device, try swapon -a
/bin/echo: write error: No such device
If I type swapon -a, I get something like this:
swapon: cannot find the device for UUID=4d79c009-9464-41d5-9f78-90644bca9ba3
It worked great before I did the upgrade... I've upgraded to 2.6.37-rc5.
Kernel: 2.6.21.5, O.S.: GNU/Linux (Slackware 12.0).
Firefox 2.0.0.4
In some sites I find a link named "Magnet Link". If I click it, the browser says:
Quote:
Firefox doesn't know how to open this address because the protocol (magnet) isn't associated with any program.These sites are p2p (peer to peer) download ones. Perhaps Magnet Link has some advantage over normal torrents and it's a pity I can't profit by it.
I try to do wireless man-in-the middle attack with my ASUS laptop and I've alreay got two wlan adaptors, a built-in Atheros NE-785H and a TP-LINK TL-W322G USB wireless adaptor. Either of them is to act as a rogue access point (soft AP). The biult-in adaptor works well but I just can't get the TP-LINK working properly.
I have alreay visited the threads below No Wireless with TP-LINK TL-WN322G found Problems with a TP-LINK TL-WN322G 54g Wireless USB Adapter (ZyDAS zd1211b Chipset ) HardwareSupportComponentsWirelessNetworkCardsTP-Link tp-link WN322G Wlan mit TP-LINK TL-WN322G
I'm running Karmic with 2.6.31-19, according to the Ubuntu help page it should work out of the box, but it just wouldn't work for me. I only got it working with ndiswrapper, which is clearly not what I want to use since it's not supported by aircrack-ng.
Here are results after running modprobe -v zd1211rw
Code:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
insmod /lib/modules/2.6.31-19-generic/updates/cw/zd1211rw.ko
then lsmod | grep zd
[Code].....
Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.
View 3 Replies View RelatedI routinely use Firefox's quick find feature. I press the slash key, /, type what I want to find on the page and it searches as I type. I love it. It's very convenient. But it doesn't work anywhere on this page.
View 5 Replies View Relatedi'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I had/have an old program which works on XP called PaperPort. It allows me to edit and fill in blank forms. I have been searching for something like that for Linux, and to date found nothing, Chances are that I am looking in the wrong places.
View 2 Replies View RelatedHow do you mark a thread as solved?
View 5 Replies View RelatedI have a raid array using mdadm made up of two drives. The drives have two parts, the first for boot information and the 2nd for LVM. Everything but /boot is under LVM management. Originly the two drives were hooked up to a sata controller in a computer with no on-board sata. However I was not able to get the computer to boot to a sata drive off of that controller. So there was an IDE drive with the MBR that loaded grub.
Now the computer in that setup seems to have died. So the drives were moved to another computer with an on-board sata controller and now the bootup works as far as getting to the grub menu. However after the grub menu the error message "Cannot find root device"
I found the boot info script [URL].. note at the time that was run the computer was running with one drive that has a full Debian install with the raid drive in question mounted and chrooted into. The script was ran from the chroot envirment.[URL]..
Just installed 64 bit Squeeze on a new build system Athlon quad core 3 GHz and 4 GB of ddr3 in a Gygabyte GA-870A-UD3 rev 2.1 mobo and I can't mount the floppy disk. The onboard controller is an ITE IT8720 chip. The floppy is a generic internal drive - Sony I think.I know the hardware is ok as various versions of Puppy linux mount and unmount it ok and.When I saved I got the message "Unable to mount floppy dev/fd0 is not a valid block device" editing back and saving got "Unable to mount floppy0 dev/fd0 is not a valid block device".Can anyone point me in the right direction?
View 4 Replies View RelatedSo far I have just used the CLI to upgrade KDE, and I get notified of upgrades once a day, where a popup shows when new upgrades are available. However, when I push the "install upgrades" button, nothing happens. In Gnome, all I had to do was click the update notifier and click install. I am pretty confident the same is posible in KDE4. I have searched the web trying to find a solution, but I can't find anything. I am probably missing some packages. Can someone help me configure:
1. Update intervals for the KDE update manager, and
2. GUI updates for the KDE4 desktop.
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) Wireless doesn't work after update of kernel (kernel-PAE-2.6.38.8-35.fc15.i686)
Quote:
Originally Posted by iwconfig
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What should I do to repair wireless?
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 1 Replies View Relatedwhenever i'm in the process of compiling and installing a new kernel in ubuntu lucid lynx i get an error message when i get to the make bzimage part is there some sort of program that i needed to install first or is there an alternative to doing this.
View 8 Replies View RelatedAfter searching other similar posts I have not found an answer. I have recently installed Ubuntu 10.4.1 after reformatting the computer from the previous Ubuntu Edgy. When rebooting get this msg (in title). I used the live CD to get into the grub files to see if I could ad 'noacip' option. But was looking for 'menu lst' file and found none. Currently when I boot I don't get any menu list and therefore no options at the bottom. Should be an easy problem to resolve Powerspec B364/160gb/856Ram/ATI raedon 200 express onboard/Geforce 8400GS PCI-e
View 8 Replies View RelatedI wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
I cannot log on. I don't know if this is related, I was setting up for remote desktop, setup a password for the remote session. After rebooting, my normal user and password do not work and my rdp password does not work.
View 13 Replies View RelatedI have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
View 8 Replies View Relatedi want to apt-get update. But it is not working.
[code]...
Is it something that is wrong in the source.list?
I'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?
I cannot restart my squeeze as a root user.I try:Code:# shutdown -r nowBroadcast message from root@WZHlinux2 (pts/0) (Fri Jun 3 23:29:33 2011):The system is going down for reboot NOW!
# init 6
but nothing happens.
BTW:
[code]...
When I type in "sudo apt-get in" and press TAB, it completes word "install".But when I logged in as super user and type in "apt-get in" and press TAB, it only beeps from system unit and doesn't complete "install". Why?
View 5 Replies View RelatedI am using my wifes comp to post thisI just installed debian but now when i boot up i get a black screen and a message from my monitor saying: input out of rangechange settings to 1280x1024 60hzas i boot up i can get into my root and get adebian~#:what code/command do i need to change the settings
View 5 Replies View RelatedI'm trying to install slackware 32 bit 13.1.After loading kernel it asks for keyboard configuration, but keyboard (usb wireless) doesn't work.
Keyboard works on the old 13.0 installation, on bios and also in the boot options of 13.1 installation cd.
I've tried removing legacy usb support and changing usb2.0 speed from high to full. Nothing changed.
Anybody with this strange problem? (kernel of setup seems also to detect it correctly as a trust keyboard).
