I installed Red hat linux 5.4 on my VMware workstation and it worked finem but the filesize of linux was not as per my requirements. VMware only gave 3GB to my root (/) which is very small. How can I adjust the filesize of linux while installing it on VMware.
View 2 Replies
I have installed VMware Workstation 6.0.5 on OpenSUSE 11.3. When I run the vmware-config.p, I get the following prompts.
Your kernel was built with "gcc" version "4.5.0", while you are trying to use
"/usr/bin/gcc" version "4.5". This configuration is not recommended and VMware
Workstation may crash if you'll continue. Please try to use exactly same
compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.5" anyway? [no]
[Code]...
I had a good copy of ubuntu on a disk but i lost it in the move, lately i decided that i wanted 2 OS's on 1 machine windows vista/Ubuntu x32. I've already got VMware workstation 7, now the great feat i'm trying to accomplish is getting this .iso of Ubuntu into my VM machine, I've got Daemon tools lite and magic-iso and magic disk. But i'm not too sure which 1 to use.
View 7 Replies View RelatedI downloaded and installed successfully vmware workstation 7 on my computer. but now when I run it it ask for kernal headers of linux kernal 2.6.38-10-generic, some C files it is looking for to compile its modules. I have searched the internet for the location of the files but I have not been able to. where are these linux headers stored in Ubuntu 11.04
View 4 Replies View RelatedI have played around with Fedora for a few years and recently switched to Ubuntu. I am installing VMWare Workstation version 7.1.0 from a retail packaged CD. When I attempt to install VMWare Workstation and VMWare Player I get the following error:
Aug 15 16:24:54.826: app-3078788800| Your GCC version: 4.5
Aug 15 16:24:54.837: app-3078788800| Your GCC version: 4.5
Aug 15 16:24:54.889: app-3078788800| Trying to find a suitable PBM set for kernel 2.6.38-10-generic.
Aug 15 16:24:54.895: app-3078788800| Trying to find a suitable PBM set for kernel 2.6.38-10-generic.....
Aug 15 16:24:56.163: app-3078788800| Failed to compile module vmmon!
I tried installing the patch for kernal 2.6.38-8 found here - [URL] - but it did not resolve the issue. Is there a patch for kernal 2.6.38-10?
I also found this posting for the same problem: [URL]. I followed the following instructions as advised in the post . . .
sudo apt-get update
sudo apt-get install make
sudo apt-get install gcc
Then enter:
uname -r
My kernel was: 2.6.38-10-generic
sudo apt-get install build-essential linux-headers-2.6.38-10-generic
Now run the vmware-install.pl script.
Everything ran without error. However, I continue to get the same error. Another post suggested uninstalliung and reinstalling the software, but this had no affect either. Another post suggested that after running the above update to them run the /usr/bin/vmware-config.pl script. However I do not seem to have the vmware-config.pl in my /usr/bin directory. I checked the various VMWARE directories in /etc and the /tmp/vmware-root directories but no vmware-config.pl
am having trouble installing oracle 10g on my vmware's 7.0 redhat linux 5.9 on my dell latitude D520 notebook i have configurared my kernel parameters and followed procedure as instructed on oracle's installation docs but when i run the ./runInstaller i get this error sms.
[oracle@localhost database]$./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
[Code]...
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
Where to download VMware workstation for Linux for free?
View 1 Replies View RelatedI'm using Fedora Core 12 quad-core Linux box. However, when I run VMWare Workstation (running a single virtual XP box, running nothing) it slows to a crawl. The load average jumps from 0.11 to 4 or even 7 when I am using the virtual box. The mouse stops responding within the virtual box, and even on Fedora itself when the load average gets high enough. I can't get any work done and I can't get into "the zone".
View 2 Replies View RelatedI just purchased vmware workstation 7 and I am trying to decide what the best host is. I will be running both windows, Linux, etc. I was hoping to go with the most stable and lean is and that is pointing towards ubuntu.
Does anyone have any experience with either or? any suggestions would be great and my linux skills are entry level but I always like to learn so I'm ready for the challenge.
I cannot connect to the windows gateway from red hat Linux which is installed on VMware workstation. I cannot ping to the gateway from Linux.
View 2 Replies View RelatedI'm trying to install ns-allinone-2.34 in Ubuntu 10.04 using vmware workstation and while installing i got -
[Code]...
I'm unable to boot the LFS-6.6 which i've built on a vmware workstation 6.5. i had no trouble in installing all the packages and have managed to run all the test suites successfully w.r.t stable LFS-6.6. while booting i get 'kernel panic' and it says unknown device /dev/sda1 and unknow block (0,0). i've only one primary partition without any swap partition. i've a label assigned to /dev/sda1 and have included it in my fstab file. device.map shows 2 entries:
One for the floppy and the other for my harddisk which is- hd0 /dev/sda. this is for the 2nd time i'm stuck at a point after perfectly installing all the stuff as mentioned in the LFS-6.6 book. i've also noticed on this website the many users have similar type of issue. it would be great if somebody could help me.
note: while configuring the linux, i've inbuilt everything required for my system, including support for ramfs and other required filesystems, scsi driver etc.
My host machine is on a intel core 2 duo processor. my virtual scsi hard disk is 3 GB in size and is a ext3 fs. scsi is configured with LSI Logic which is recommended by vmware while adding an hard-disk.
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
I am recently installed linux redhat 5.0 using vmware. I am unable to connect pendrive in vmware. I've also one more problem. When i was typing small 'C'language program in vi editor and compiled it and it showed an error like "Bash: cc compiler not found".
View 3 Replies View RelatedI can install 'VMware-Workstation-6.5.0-118166.i386.bundle' without problems, but when I try to run #vmware in my terminal I get:
This is what I have installed:
I tested 11.04 beta 1 on one of my computers and was happy to see VmWare workstation 7.1.4 to work fine on it. Then I decided to upgrade my most frequently used computer to 11.04 beta 2, but I can't get VMware to work properly. When I click on some of the function button such as start a VM or maybe change a setting VMware just closes. I can't figure it out, I've tried it with Unity, Gnome with effects, Gnome without. Nouveau driver, Distro nVidia driver, downloaded nVidia driver, and VGA driver. It was nothing to do with Video driver, but that is about the only hardware difference with the other machine that works, it has Intel Video.
View 9 Replies View RelatedI keep installing Debian Workstation Player on Debian, but it just doesn't open. I think it might have something to do with the VMware kernel modules not being built or something. How can I start troubleshooting this? Also, why isn't VMware packaged? Has no one tried packaging it yet, or is there a more complex reason?
View 3 Replies View Relatedi downloaded Vmware Workstation 7 onto my Windows XP PC and i have tested the os on a HP laptop so the OS is fine, well back to the point i load it up and VMware has a error saying it can not find "C:/Documents/allusers/applicationdata/" something like that ill add a picture so you will see.
i installed an rebooted and i still get this problem.
I have a Windows 7 OS running VMWare workstation and have used a 11.2 OpenSusie distro to install OPenSusie in one of the VMWare environments. Looking in file manager I see all the 'usual' folders, but the CD-Rom is 'pointing' to the iso mounted CD - ie the virtual one. How do I open/mount the real CD/DVD and also how do I access the files in Win7.
View 1 Replies View RelatedI am using my OpenSuse 11.2 in VMware Workstation. I didn't do anything to it and when I open it, there is no more GUI coming up. Only command line interface came up. how can I change this back to GUI?
View 9 Replies View Relatedmy problem is with Vmware Workstation after upgraded from Ubuntu 10.10 to 11.04. Vmware dissapears when i do anything in it. I have posted a video for those who want to see the problem in action and i have a syncmaster t240HD as my monitor but Ubuntu says its an Unknown Monitor.
[URL]
Update: Catalyst Control Center reports my monitor and the settings correctly.
I've been trying to install VMware workstation 7.1.4- but I've run into a problem. Due some bugs i've had to install vmware a couple of times. Now one time I removed /etc/vmware before uninstalling it. This might be stupid but after I've done this vmware wouldn't uninstall anymore. It would say that there where instances of vmware running though I've never even been at the point that I ran vmware. The installer would say that vmware was already installed so it wouldn't install either. Now I've removed as much vmware files as I could find. But now if I run
Code:
sudo sh vmware-workstation-full-7.1.4-385536.i386.bundle
It wil say
Quote:
Extracting VMware Installer...done.
And then nothing. It will just silently quit. It doesn't give an error, it doesn't start the installer GUI, it will just quit. Now I suspect there are vmware files somewhere that confuse the installer but I've no idea if this is true or where these files are. how to completly wipe any vmware-workstation file from my computer as if vmware was never installed?
EDIT: if I run sh vmware-workstation-full-7.1.4-385536.i386.bundle -r, it will show the installer again but show that vmware is already installed
I'm having an issue with Vmvware workstation on Ubuntu 11.04. Well, I had many issues, but most of them have workarounds. I can't find any info on this issue. When I have multiple displays enabled (nvidia prop) and launch workstation 7.1.4, my second monitor will become disabled. The unity menu will also stretch out and basically the computer becomes unusable. I have to restart.
View 1 Replies View Relatedinstalled VMWare workstation by following the steps on this page. Everything seemed to install ok, I have a VMWare Workstation and VMWare Player link in my System menu, but when I click them nothing launches.
I even rebooted to see if that would help, nada.
how I can launch VMWare Workstation? Need to set up a couple Windows clients.
I want to run a mail server from within debian linux guest with vmware workstation xp host. The setup is a bridged network connection
Here are things that need to be done:
a)Configure the Guest with a static IP on my home network. Verify that I can telnet to port 25 of the Guest from a system on my home network.
b)Then configure my home firewall/NAT box to forward incoming connections on TCP port 25 to the static IP address I gave my Guest. Then test that I can telnet to port 25 from a system outside my home network.
c)After that I need to configure the appropriate DNS records for my domain so that outside hosts know how to contact my mailserver.
MY OS IS (Widnows XP ) I'm Using VMware Workstation 7 to run My BT4-Beta (backtrack 4)
in my OS Windows XP I have Internet I'm in big network our administrator using Cyberoam Client for Corporate to allow people using Internet.. so if any people connect this network they should has id in Cyberoam if they don't has id will can't connect to the internet.. they will redirect automatically to the log in page in Cyberoam.
So ! in VMware Workstation 7 i configure network adapter to Bridged and i see internet icon with green color but dose not browse internet and also i can't ping my computer this is mean network dose not appear to backtrack my computer is in the network when i try to do ping this is what happened.
And this output to try run network!
PHP Code:
And this is my ifconfig
How to do Step by Step to connect the network using VMware WorkStation!
Im using fedora 13 x64 install from DVD. Has anyone else found problems using vmware 7.0.1 or 7.1. My bridged networking will not pickup a dhcp address, and even if I configure static my network will still not work, yet NAT works fine. Even configuring bridged to use a dedicated device doesnt work. Workstation worked fine on Fedora 12 but this seems to be a reoccuring problem in every other release.
View 5 Replies View RelatedI have several questions regarding installation of Ubuntu 9.10 on top of VMWare Workstation:
1) can the Ubuntu .iso be on a memory stick, or does it need to be burned to a CD, for installation on top of VMWare ??
2) VMWare workstation sits on top of Windows 7, 64 bit. Am I best off with 64 bit Ubuntu or will the 32 bit install suffice ? I am not doing anything performance heavy with Ubuntu, I am just playing with it to become more familar. I've heard such great things.
