I just switched to a faster isp with monthly usage limits. When I install a program using Synaptic, where are the install files stored? I'd like to save them for future use. Also, I'm downloading Conky right now to monitor usage.
View 8 RepliesI download a file to my laptop desktop, it saves above and behind the panel menubar (Applications / Places / System). As such, the files aren't easily accessible.How might I ensure that downloaded files are visible on the screen and not 100px above & behind it? Perhaps related, I've got a second monitor attached to the laptop (primary). It seems this second monitor's resolution is affecting where downloaded files are put...out of sight.
Primary laptop: Dell Vostro 1310. Resolution = 1280x800
Secondary monitor: Acer 19-inch LCD Flat Panel. Resolution = 1280x1024.
I've tried all the settings in Monitor Preferences to no avail. Searched Google without luck. Currently on Ubuntu 10.10 and the system is (according to Update Manager) up-to-date.
if i configured the /etc/yum.conf file to:
keepcache=1
this seems to keep downloaded packages. in the dir specified at:
cachedir=/var/cache/yum
the next time i wish to use these packages and install them, how would i use yum to do this or do i just use rpm instead ? Would it be necessary to connect to the internet to do this? What about those package dependencies will i have to install them all one at a time?
Just installed Ubuntu 11.04 32-bit on an older Dell D610 laptop. Everything was running a little slow but all in all running fine except one thing - I downloaded the Chrome deb file and also the deb file from Moneydance. When I double-click on either of these deb files, it opens up the Ubuntu Software Center and shows an 'Install' button for the app. I click Install and then enter my root password, then nothing happens. A short while later the Install button turns from grayed out to clickable again. So I click it again, and it says that the deb file is not packaged correctly.
I've tried it with multiple deb files now and get the same thing. Installing directly through the Ubuntu Software Center works fine, but unortunately Chrome and Moneydance aren't in there (I prefer Chrome to Chromium). What could be causing this?
Also - due to the slowness of the Ubuntu install I did a clean install to Xubuntu and I like that much better and it is running perfectly except for this issue of not being able to install any 3rd-party downloaded apps.
How do I install downloaded fIles in fedora 12. For example fLASH_10?
View 6 Replies View Related"You'll probably want to operate from inside your home directory. If your user is (for example) username, your home directory will be /home/username/. For the rest of this section we will assume you have downloaded your zip file to /home/username/src. If you do not have a src directory, you can create it with the following "mkdir" (make directory) command:"
Where do the commands go? I cant make it work in terminal. How do I get back to "home" from where i am now? example /home/mydesktop/. I am working in mydesktop. I have downloaded some packages that pkcon search will not find, but when I try to install them using "synaptic" it cant find the packages i dl. So I found this tutorial.
"So, we have our source package in /home/username/src/.
Change to the /home/username/src/ directory with the "cd" (change directory) command like so: cd /home/username/src/
but I dont know where to write the commands.
A game I found recently through an web repository. Downloaded the all neded dependencies and .rpm files, but cant install them.. terminal output below:'
Code:
[root@localhost Downloads]# yum localinstall luola-1.3.2-2.fc6.rf.i386.rpm luola-levels-1.3.2-1.0.rf.noarch.rpm luola-debuginfo-1.3.2-2.fc3.rf.i386.rpm
[code]....
I just set up an VPS with ubuntu. I made a user1 and gave it ownership
Code:
chown -R user1 /home/www
This user also have been given all the root privileges (I know it is not recommended!)
The problem is that each time I make new site, and user1 wants to upload (through ftp) files to /home/www/newsite I need to redo the the above command in order to be enable user1 to upload. Not only this, I need to rework permissions (744 for folders and 644 for files), otherwise the newsite throws permission errors message.
I would like to set both user and group permissions permanently to be 'rwx' (read-write-execute). I would like these rwx settings for all the future files and folders.
I tried umask 002, chmod etc, but they don't set it for future files.
I am considering buying a netbook and installing the netbook remix from a bootable USB. During the installation, does the installer give me the option to create a dual boot scenario and keep the windows 7 as a partition? If it does not, what is the best way to clone the windows 7 install and can I put it on a usb to boot and install from in the future?
View 4 Replies View RelatedI'm going round everyone I know installing Ubuntu on their computers whether they like it or not, and I must say so far they all like it except. I have to spend 5 hours downloading and installing all the software they need to make their system run 'as good as windows'.
I really need a whole bunch of popular programmes to put on a disk and install as I go. I know Ubuntu saves the downloads in a repository on the hard drive, but looking at it I am sometimes at a loss as to which folders contain which downloads, then there is the problem of multiple folders for one programme etc.or point me in the direction of a zipped up file with all the programmes a normal user might need.
I dual boot Ubuntu 9.10 and Windows 7 and am running EXT4 file system on the ubuntu partition.
When I try to save files in Ubuntu to the mounted drives that contain Windows and other data, it writes successfully but when I try to view it in Windows 7, I cannot see the written files.
I've been getting annoyed with the way that Firefox opens files for me. I used to have it so that they would come up with a window that asked whether I wished to save files onto the hard drive or simply open them. When choosing to Save, they would go to my Desktop. Because I mainly save files from my Uni website, they are generally .pdf files. N for some reason, they open in the Firefox window, so then I have to go to File, Save, then choose where I want to save it. It would be more efficient if it worked the way it did originally. How can I get the settings back to the way they were? I am running Ubuntu 9.04 and Firefox 3.0.19. Because I use a shared computer, I'm not sure whether the version of Firefox has been changed.
View 9 Replies View RelatedI am wondering if there is already a feature, and if not, then a way to save any open files before a shutdown occurs?
I use xfce4 battery plugin and there is the option to invoke a shutdown whn the batt. hits critical percentage, but I would like to be able to run something at the low percentage stage to save any open files in case the critical stage is reached. I have had no luck googling any solutions or potential solutions.
Not sure if I am doing this correctly, just the obvious way I guess. I have dual boot with Ubuntu 10.10 and Win7 x64. They are on their own partitions, Windows on NTFS and Ubuntu on ext4.
Every now and then when I am in my Ubuntu system, I will load/save files from the NTFS partition. So I mount the NTFS by just going on places and clicking on the drive.
This morning I loaded some video files and converted them to wav files in Kdenlive, saving them back to NTFS. I then right clicked on the Windows drive and un mounted it, no problem.
Re-booting into Windows I found that the files were not there! Well one of the files was, but it was corrupt and not complete.
Looking in Ubuntu, the files were not there either.
I have seen this behaviour in the past, but never thought anything of it, just that maybe I hadn't un-mounted the drive correctly, but this was not the case this time. Does Ubuntu have a /very/ delayed write to NTFS? I assumed that if it un-mounted correctly then everything had finished writing?
I downloaded, through the torrent, the Pink Floyd's Live in Gdansk concert. It first downloaded as an ISO and when I unzipped I now have 5 CD folders with bin files in them. I've searched and followed many different instructions to open the bin files but nothing is working. How to be able to listen to the music?
View 4 Replies View RelatedIf I DL something from the Internet It askes were to save. This is normal however even though my 2 computers are nicely networked I can't seem to navigate to the network to save onto the other computer.
View 6 Replies View RelatedI have a really nuisance problem. I have two NAS servers - different makes - both of which work perfectly under Windows XP. I can write new files, save existing files without error. Both servers have drives formatted to FAT32 - the only option - although the OS's are almost certainly an embedded Linux.Both units are recognized by Ubuntu 10.04 - and I can write new files to them both without problem (although the directory does not refresh - I have to reload it). I can also delete without problems. If I try and save over an existing file I get an error "Unexpected error: Invalid argument" - I presume the implied delete is failing but am not sure. New files also seem to be saved with the Read Only flag set.OK - I can work round the problem by deleting the files (that works OK) and saving them anew. Works fine - but a backup is impossible as any changed file will give rise to the error.I have tucked both drives into the hosts files in /etc - although I attach by IP address (which is fixed) anyway.
View 3 Replies View RelatedI use RipperX to rip CD's on my Ubuntu home server. The files it rips and encodes are in mp3 and they are all fine.
However the system is not saving id3 information for the final two tracks, despite having all the information.
You can see what I'm describing in these images: [URL]
If you want more information just say, I'll get back to you.
I have to use and update many documents on a network share in my organization. I am using OpenOffice 3.2 (latest and Greatest). When I go to the document that I need via the network share, I can open up the document no problem at all but the minute I attempt to save it, it will freeze and I have to:
PHP Code:
pgrep soffice| xargs -i kill -9 {}
Kill it. To get it to work I have to save the document from a .docx format to a .doc format then all works well. Unfortunately, all of my coworkers use the latest and greatest of MS Office.
I switched from 9.10 to 10.10. In 9.10 there was a folder where the temporary flv ..... video files were downloaded, so I could capture them before being deleted. Now with 10.10, which is the folder? /tmp isn't, I'm watching videos but no flashxxxxx files there.
View 6 Replies View RelatedCan I somehow stop Firefox from saving files with rwxrwxrwx permissions?If so how do I set just user rw?
View 8 Replies View RelatedWhenever I download a file using Firefox or Google Chrome and it has a ' character on it's filename, the file is renamed and a is added before the '. It's really annoying and I'd like to know how can I solve this issue.
View 9 Replies View RelatedSo I downloaded a bunch of movies on Ubuntu, which work fine. They are on a shared drive, so when I look at them using Windows 7 they are displayed as a 'file' rather than an .avi
They can still be opened and played in VLC and play fine
I've downloaded 4 versions of Ubuntu and Kubuntu but I've had no success in making a CD. Downloading them at the same time should not have been the problem as I've done it before. This was done after a fresh install of 9.04 Jaunty I had a problem with previous installs I have of an upgraded lucid 10.04 Could several partitions cause a file corruption, I know I had a file problem with Ubuntu one across several partitions.
View 7 Replies View RelatedDoes anyone know where the files downloaded from the Ubuntu One Music Store are stored?They are not in the Music folder or anywhere else in my home folder that I can determine, yet Rhythmbox sees them. I noticed that in the Rhythmbox preferences I can no longer specify one specific folder as a watch folder (it defaults back to "Multiple Locations Set"). I'd like to transfer the files I bought to a flash drive, but cannot find them.
View 9 Replies View RelatedIs there is any application to join files downloaded from rapidshare??Generally i use hjsplit to join these files in windows.. what application i have to use to join those files in ubuntu.They have an extension like 001,002,etc.
View 9 Replies View RelatedI'm looking for a script or a bittorrent client which is able to move a file after downloading and placing it in a specific folder depending on the file type. E.g. moving a newly downloaded movie to "Videos" and an ISO-file to "Files".
I feel as if i have used a client with this functionality before but can't remember the name.
Since I at the moment use Transmission as my bittorrent client a script would also work since Transmission can run it after finishing the download.
I usually work with plain text files, and when moving them across platforms, the differing format creates problems. I want that whenever I save a file with extension *.txt, it be saved as DOS format, and all other extensions or without get saved as Unix format.
View 2 Replies View RelatedI have just downloaded fedora cds iso image it contain six zip files:
Fedora-12-i386-disc1
Fedora-12-i386-disc2
Fedora-12-i386-disc3
Fedora-12-i386-disc4
Fedora-12-i386-disc5
Fedora-12-i386-netinst
I want to know what is the last one used for?