How to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
View 10 Replies
I need to know that how to use my micromax MMX 352G (USB MODEM) in oracle linux. i am unable to detect my modem using wvdialconf.
View 2 Replies View RelatedI have installed and setup 3G which works perfectly fine. I use sakis3g scripts for connecting to 3G network. My VPN profile created with network manager (client/NetworkManager GUI) works well.
#cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',wlan0,&
Now when I do the same with using using ppp0 (which is after connecting to VPN) I get the following error messages. #cnetworkmanager --activate-connection=user,'XXXXX_vpn_singapore',ppp0,&
[Code]...
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI am trying to connect my q75 micromax mobile with my computer as modem using wvdial. But I could not connect as modem. I insalled wvdial, gnome-ppp and mode switch through synaptic package manager.
This is the message I got from terminal window. After this, there is no connection. I closed the terminal window using ctrl+C command. My mobile is dual sim phone. I want to connect through one ISP provider for GPRS. How to set this in wvdial configuration file.
Quote:
subramanian@subramanian:~$ sudo wvdialconf
[sudo] password for subramanian:
Editing `/etc/wvdial.conf'.
[Code].....
I use ubuntu 11.04 on my laptop, which I upgraded yesterday itself. After plugging in the usb modem, lsusb shows 1c9e:f000. its product if is 9605. As it should be switching to 9605, but it doesnt. It doesnt show up in Computer as usb modem disk. Moreover, it also doesnt create any ttyUSB file in /dev. Whereas when I plug in the terracom usb 3g modem, it gets detected, switched and works fine. Kindly suggest as I am trying to solve this problem since 4 days with all the methods posted all over the internet, but nothing seems to work...
View 3 Replies View RelatedRegarding the installation of a 3g modem and it also has a built-in slot which reads micro sd cards. the company micromax has not replied even after a week for my request for linux drivers so i think that the dont have them. I have setup my network but i dont know if its working or not as i cannot connect to the internet via my usb device. i have done a dual boot of backtrack 4 final and windows xp sp2(bt4 installed after). my laptop is compaq presario v6307. i tried installing the windows drivers of the device in backtrack, they were installed and a icon was formed on my desktop in bt4 but when i connect the device the aplication tells "no device" i guess its not reading it right?
View 1 Replies View RelatedI have a Multitech MT9234ZBA-USB modem. The CD included RHEL drivers which I have installed with RPM. The lsusb command output shows the modem: Bus 004 Device 005: ID 06e0:0319 Multi-Tech Systems, Inc.Which communications software should I use to connect to the modem and issue AT commands?
View 4 Replies View RelatedFresh install of FC11. Had to install libwvstreams-4.5.1-5.fc11.i586.rpm and wvdial-1.60-8.fc11.i586.rpm
Now get following error -
ubuntu is unable to find my huawei E160 modem driver when i insert it to my computer.
View 2 Replies View RelatedI have been using an ethernet ADSL Westell modem for years and would like to upgrade to a newish Allied Telesyn USB Modem AT-AR206 in Fedora Core 10. The modem power goes on when plugged into my pc and lsusb shows that it has been recognized with this:
Bus 002 Device 003: ID 1110:9022 Analog Devices Canada, Ltd (Allied Telesyn) ADSL Loader
I used system-config-network but don't have the option of adding this new hardware.
How do I configure my network to use my DSL line?
I want to configure my ADSL but I don't know what should I do. Can you explain me How can I configure it?(I use fc10, ethernet cable <Asus Am608 ADSL modem)
View 9 Replies View Relatedim using Centos 4.8 server system.. i want to install huwawi e1550 usb modem and configure it with "nagios". Can anyone help me to install huwawi e1550 modem.
View 1 Replies View RelatedI have bought a new USB modem from my service provider. The model they provided is "Huawei EC1260" Huawei Terminal. As usual the official support is for windows and mac.
I tried to install this device using two methods..
1) Set knetworkmanager settings to "traditional with ifup". Then in wireless setup there is a choice of having "usb" (A tick box). I selected that, and setup completed successfully but the knetworkmanager was not up(I did ifdown wlan0 (wlan0 was the wireless config name), ifup wlan0 and the rcnetwork restart.)
2) Again knetworkmanager was set to "traditional method with ifup. This times while adding the connection I specifically selected the type "USB", then clicked to finish the configuration. The configuration finished without any errors but when I checked the Network Configuration screen no USB device was added there.
Are there any specific steps to configure a USB modem
I'm new to Ubuntu. Recently bought a lenovo x100e netbook and installed ubuntu. Is there any Ubuntu Expert based in Cape Town that can assist to configure my internal 3g modem and a few other minor issues.
View 2 Replies View RelatedI 've tried many ways to configure my Reliance NetConnect with Ubuntu. I 've tried with wvdial, sudo pon, tried through Network Manager, and using wine I installed the .exe driver.
I liked Ubuntu, but I need to configure usb modem..
I 'm using Huawei EC325, Reliance NetConnect USB modem..
When I try using wvdial, I can see some operations performing, its dialing #777, but some prob with the carrier..
I've recently come into possession of this modem which is supposed to be supported in linux kernels but I'm not sure how to set it up or detect where it is located (dev/ttxx)
View 5 Replies View RelatedI'm new to opensuse as well linux.today i installed suse 11.3 and installation completed.then i plug the usb modem (ZTE mf 100) and then nothing appears..i dont know what to do for configure the modem.
View 2 Replies View RelatedI have a Zoom 2920 internal hardware modem that worked well with Suse 10.0. In Suse 11.3 the modem config. overview lists 2 modems for this one board; #1- AT Modem and #2- Venus Modem (v90, 56K Flex). With #1 "edit" brings up modem parameters and the modem device line is blank. With #2 the device line shows /dev/ttys4.
When the provider parameters are entered, for either #1 or #2, the modem overview continues to list them as not configured but a third line "modem 0" is configured with the provider information at /dev/ttys4. The modem will not function.
I have an internal cextant modem in my Dell Inspiron 630m laptop, with 11.04 knatty running.How do I configure knatty to detect and run my modem, as I need it to dial into equipment to do remote diagnostics
View 1 Replies View RelatedI have a Nokia 1508i, and I want to use it as a modem. But I've tried many times, many configurations and it didn't worked.
When I connect it via USB to the computer, it's recognized as /dev/ttyUSB0 and /dev/ttyUSB1.
When I try to connect using the Code: wvdial , I get the following message:
Code:
Modem Type = USB Modem This is the log of Windows when I connect:
Code:
Scanning your serial ports for a modem.
i m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not
View 14 Replies View RelatedI am trying to access the internet via my ZTE AC2726 USB EVDO Modem in openSuSE Linux 11.3.
I have looked at the site How to configure ZTE AC2726 USB EVDO Modem on openSuSE Linux | bayuirawan.com but when I type the command:
As below,the following errors appear:
how to configure Huawei 3G modem (ec325) in ubuntu 10.04, even i tried with gnome-ppp / wvdial which unable to connect, shows "ppp deamon died" and disconnected at the end of dial.
View 3 Replies View RelatedI have started using ubuntu 11.04 desktop edition recently. And sadly i dont have an internet connection. I have an USB modem of Huawei. But I cant configure that in ubuntu. Im from india and using Reliance Netconnect 1x EC121 modem. Can anybody please tell me how to configure this modem so that I can connect to the internet? Due to lack of internet connection im not being able to download any updates or codecs. I have started using Ubuntu only 2 days ago..
View 1 Replies View RelatedWhile communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies View RelatedSteps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedHow would I configure my box to connect to a modem in bridge mode?
I have a server at home that im migrating over to be the default-gateway/router. I have everything else setup (dns,dhcp etc) now just need the ppoe part, or so i beleive?
I have two interfaces. eth0 (lan) and eth1 ready to connect to the modem.
The modem is in bridge mode ready to go.
What is my next step? Are there any good guides, I didn't find any.
I have Ubuntu 9.04 in my desktop, I am trying to configure Photon+ wireless device in my desktop, since it is having .exe file i am finding difficulty to configure it( I know .exe will not work) , but i want to know is there any possibility to configure this modem in Ubuntu machine....
View 1 Replies View Relatedi have been able to get on line running other linux os using the terminal first i type sudo modprobe -r usbserial & enter followed by sudo modprobe usbserial vendor=0x1199 product=0x120 & enter the last command is sudo dmesg|grep -i ttyusb. I have done this for years and it always has got me on line after the above i open kppp and select for modem /dev/ttyusb0 and click to verify kppp recognizes my sierra wireless usb modem and that is all i have ever had to do, plug in the usb modem type the three commands it comes back with confirmation the modem is attached to ttyusb0, ttyusb1 & ttyusb2 in kppp i click /dev/ttyusb0 and click quarry and get on line with suse11.1 it is not so the first command sudo modprobe -r usbserial comes back with a fatal error but the second and third command give me the same results saying i have attached the usbmodem to ttyusb0,1 & 2. but i cannot configure it in kppp.
i have tried researching on line but cannot find a similar thread. I believe the way i described above has worked on lindows 5.0, and it is how i do it with Mint which i can get on line with today. so i hope one of the wonderful millions of linux users will direct me as to what i am doing wrong. i am running amd 785 4 gb ram msi mainboard ms-7549 my modem is sierra wierless modem 595u (vendor=0x1199 product=0x120) connecting through Sprint pcs which requires no user name or password.
