I have no luck in configuring zte ac2627 so for, have searched many threads but no luck yet.
Code:
[root@Wazirkutz ~]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have a creative modem blaster V.92 which I know works because I have used it on windows and ubuntu how ever I am having some problems with F11 it sounds like its dialing okay and the box pops up that says please wait when I try to connect via the network manager thing but thats all it does the box never goes away and I've looked at the modem lights thing I added to my panel and it says its not sending or receiving anything and firefox doesnt work so I am not sure what I am doing wrong here.
I got an error with the default settings so I switched the device to ttys0 and set the baudrate according to what wvdialconf said was okay which also wont connect for some reason it hangs too.. I am confused here. Has anyone successfully set up a dial up connection in fedora 11
I have F9, F10, F11 and F12 installed along with WinXP on my desktop PC. I connect to the internet thru 56K dialup modem (USR-5610B). The earlier versions of Fedora, F9, F10 and F11, all can connect via dialup modem.
My F12 installation is augmented with the following rpms - kudzu-1.2.86.2.i686, libwvstreams-4.6-5.fc12.i686 and wvdial-1.60.10.fc12.i686 (and the rpm for USR-5610B modem)
Network Configuration GUI shows ppp0 (Modem) in the Common Active Profile
However, ppp0 does NOT show up in the Network Device Control GUI, AND ACTIVATE and DEACTIVATE buttons are GREYED-OUT.
My EVDO (Mass storage cum Modem device) like USB Modems not working on Linux-2.6.10 kernel.I used usb_modeswitch-1.0.5.tar.bz2 package on Linux to flip from mass storage device to modem
View 3 Replies View RelatedBeen trying to get my UML 290 (4g) modem to work under Fedora 15. I have tried to use networkmanager, wvdial and ppp guides onhtml. I am at my wits end trying to get this to work!I am beginning to think that Fedora doesn't recognize it at all.
View 1 Replies View RelatedI am new in linux, have just installed ubuntu server 9.4 64bit ver and cannot get my usb modem mc950d to work.
View 3 Replies View RelatedI use O2 HSDPA USB modem to connect Internet. I think theirs no Brand for it. (Unbranded O2 dongle)
Its successfully working in Windows7. But I cant connect to the internet using the same dongle on Fedora13
I tried USB modswitched and also the Sakis3G script...but no effect..
Below are some information I got after executing lsusb on bash.
Bus 006 Device 002: ID 1c9e:6061
getting a gobi un2420 internal 3g modem working in FC13?
View 8 Replies View Relatedcdma usb modem recognized on as mass storage device.nstalled wvdialler and made appropriate lines to conf file and still does not work.
View 5 Replies View RelatedI have bought a so-called web'n'walk stick, which identifies itself as a "Globetrotter HSDPA Model". I managed to get it identified as a serial device (initially, it is detected as a USB drive), but I fail to get it working.
Things that might be of interest:
Code:
Code:
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI've tried setting usb_modeswitch wvdial etc .. modem has been detected as a modem fff1 but still could not connect to the internet ... I try to use the network connection settings still can not ..so what should I do?
View 2 Replies View RelatedI have tried to get several USB modems to work with Fedora without success. Some time ago I was able to get a Maxon BPS6 to work but I no longer have that unit. I have tried a ZTE 636 which is recognised by the system and have run usb_modeswitch to make it be recognised as a modem and not a cdrom. Seems that what ever I do the modem produces an error - unable to connect to modem.getting my modem working on a completely fresh install of Fedora 13
View 2 Replies View RelatedI use a modem which is not on fedora inbuilt list. I need to give linux a shot. what is my work around.
View 1 Replies View RelatedHow to configure micromax mmx 310g usb modem in fedora 13? it comes with default installation files for windows and Mac.....moreover it is detected as a cd-rom when i am inserting it in fedora 13....
View 10 Replies View RelatedI have installed the 3 packages required for MTS Mblaze 3G Modem to get connected to the internet.
Quote:
1. usb_modeswitch
2. usb_modeswitch-data
3. wvdial
Here is the "/etc/wvdial.conf" file that gets generated when I do the "wvdialconf"
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
[code]...
But now when I open Mozilla or Google Chrome Internet Browsers, I am not able to connect. Moreover, I also tried to ping to [URL] but it is not pinging.Is it related to some Network Manager settings. As when I look at the Network Connection Icon, it shows CROSS i.e. not connected to any network...
I have installed Ubuntu long ago, and I just loved it =), but I have been quite disappointed about the drivers support of some components, for example: I have a USB Modem ZTE MF622, my ISP is TMN. I have read about people that have configured it Ubuntu 9.04 and with another ISP, but when it comes to Ubuntu 9.10, nothing appears to be working.
View 1 Replies View Relatedi delete windows a while back, but i have received a new modem from my telco, it has i disk with it that won't work on ubuntu so i need to either get the modem working or recovery my whole system and start again, the old 2wire work straght up so this might if i install it in windows and install ubuntu again, the problem is when i start the windows vista recovery wizard, it starts to format and i get an error 0x400110020000100A, the modem is a thomson TG782T
View 7 Replies View RelatedIm using usb wimax modem for qubee. its web address is [URL]
in terninal after giving the lsusb command i get the following output
sanjoy@ubuntu:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
after that I give dmesg>output.text so a text file I goet which is attached. output.zip
Imagine this scenario at my home: I'm working on my laptop using WLAN receiver as I have a router installed at my home. Suddenly the electricity fails (it's a regular incident here in Bangladesh called Load-shedding) and the power source to modem and router dies.As a result, my internet connection drops. To connect to the internet without power, I use this QUBEE UH-235 WiMAX USB Modem. Now I know QUBEE may not be there in your country. But after a bit of research I figured that this UH-235 modem is commont every country. QUBEE just branded its logo on the device and the software within.This one is not my device, mine is here.
In my windows, the software is installed as soon as I plug in the USB. That software then detects the modem, scans for network, and then connects to the internet. No extra CD is required for this. However, on an Ubuntu machine, I can't get it working. I guess there are ways to get this UH-235 modem working on my Ubuntu machine. This is keeping me from using Ubuntu as you know I'll have to restart and log in to WIndows whenever electricity is off as Ubuntu works with Wi-Fi, not this UH-235 modem when the Wi-Fi is out of power
I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing.
View 3 Replies View RelatedI installed Cent OS 5 in my computer system. I use GPRS modem for browsing the net. I use my cell phone as a modem. The problem is that when I connect the phone modem to the system the computer gets turn off. And it does not start again until I disconnect the usb cable of the phone.how to use a GPRS modem in Cent OS 5?
View 2 Replies View RelatedIt's been a while since I've logged into this forum, but I'm back to using openSUSE, and my experience with this OS has so far been quite pleasant. I have a U.S. Robotics Dial-up modem, model USR5637, that I've used with other linux OS's, such as Ubuntu, Fedora, and Puppy, but I haven't had any luck using this modem with openSUSE. This is a full hardware modem.
Usually, when using this modem on a new Ubuntu system, I got into the terminal, type "lsmod" and then "modprobe cdc_acm" and the modem begins to work. However, in openSUSE this is not the case. I'm using Gnome and KDE, with kppp, and I'm unable to connect to the internet. Is there a way of installing this modem that I am overlooking?
I just can't seem to get this thing going. I've also tried Gnome-ppp. Press detect and it says "no modem installed" I did install it in Windows as well to make sure the darn thing actually works. It did perfectly.
Your US Robotics modem attached at /dev/ttyACM0 >>> The problemt: wvdial for some reason cannot use it
I had to edit the /etc/wvdial.conf file with gksudo gedit /etc/wvdial.conf
john@ubuntu:~$ sudo wvdial
[sudo] password for john:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port
[Code]....
This is really weird, and I would like just this question answered: I've spent like 2 hours by plugging, unplugging, rebooting, and doing everything I could, but the modem wasn't working. When I did ls /dev/ttyU* it was showing up a list of 6 usb devices.
Code:
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2
/dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5
And when I sent the command wvdialconf after looking into all the devices, it didn't recognize any modem.
The thing is, that by the time I was writing here for a solution, I disconnected the modem, and when I reconnected it I did a ls /dev/ttyU* just to copypaste the info, and Voil! there were just 2 devices, and wvdialconf worked out just fine! I would like to know what I was doing wrong, so I make sure it won't happen again.
Oh, and I forgot to say: I use Ubuntu 8.04
I have a ZTE USM Modem from 3 Tre Italy, on the tre.it network. The modem worked fine for a month or so. Yesterday I recharged the SIM and the modem has stopped working after midnight. Earlier, the modem would indicate a red light, and then turn to green, blink a few times, and connect on its own.
Now, it shows red, goes off, and then stays red constantly. I've tried putting the priginal PIN that came with the SIM into my Mobile Broadband settings in Network Manager to no avail.
[Code]...
I recently received my Ubuntu 9.10 CD, Kubuntu 9.10CD and Server Edition. I was recommended to do so by a friend because my computer Running on Windows Vista Home Basic with 512MB RAM has been extremely, unbearably slow for the last month or so I got the CD's yesterday and I ran the Ubuntu CD and everything was fine, I rebooted the Computer and it started up! It was great!! Really quick and responsive and easy to use and i LOVE it's features...
My only problem is my Broadband. I live in Ireland and I have my broadband with o2, it's quick and sufficient for my needs. I have a Huawei E270 usb modem (It's wireless broadband). And it wouldn't Work. I plugged it into my pc with Ubuntu up and running and it opened the File for o2 rather than the Interface for it. When I plugged the modem in there was a green lock symbol on the top right of the screen. Is Ubuntu even compatible with the E270 modem?
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
I'm new to ubuntu. I'm trying to get my US Robotics external serial modem working so I can use Ubuntu.
I copied
wvdial & dependencies:
libuniconf4.6
libwvstreams4.6-extras
libwvstreams4.6-base
to a flash drive.
How do I get them to /var/cache/apt/archives? I tried to copy and drag&drop wont work.