do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory /usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory /usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
I was playing around with bash scripting and the last thing I remember doing was checking for suid root files. However now I cannot launch sbopkg, tpfand etc and the binaries are nowhere to be seen. I was experimenting with the sticky bit for tpfand so I could load it as a normal user.
Code: chmod u+s /usr/sbin/tpfand chmod u-s /usr/sbin/tpfand However now tpfand is no long in /usr/sbin. But a whereis produces the following results.
The same applies for sbopkg, which I have not touched. I think this problem is also related to the wicd error stating it cannot connect to DBus client From these symptoms has anybody experienced anything like this before from tinkering?
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
I am trying to compile VLC code base on my Fedora5 system. I am getting the error when i am trying to run ./configure command.DBUS >=1.0.0. installed libdubs-dev is not installedwhat should I do. I have already installed DBUS (1.4.1).
Debian and running Lenny on a server. I'm trying to install dbus and get an error:
So it seems I'm missing the /etc/rc0.d directory. I checked and all the other rc directories are there, from rc1.d to rc6.d, rc.local and rcS.d.
I don't know how deep these things go and I don't know why I'm missing the rc0.d. Can I just create the directory myself and that's it? It doesn't break anything somewhere else if I make it up myself? Or do I need to do something else to get this working?
I don't know if this is the right place to post this but here goes anyway.
System: ASUS Pro50n Laptop Distro: Arch Linux WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
i installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz here is one example
Code: dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?
I am running 64-bit current. I have not identified which update started the Dolphin crashes, but it recently has been happening very often, usually within a few seconds of starting it, but not always.
Googling suggested that it might be a dbus issue, so I rolled my own package using dbus-1.4.0 and the slackbuild from the 64 bit current source.
Dolphin has been rock solid since. I noticed that there was an 'allow root globally' patch which I commented out. I am guessing that this may affect applications that I have not used yet or the issue has been fixed in version 1.4.
I have not seen any evidence that other current users have had this problem, but maybe Robby would consider an upgrade?
SInce I upgraded to 13.1 I get the above error with lots of programs. I check the D-BUS with /etc/rc.d/rc.messagebus status and it says the D-BUS daemon is running. What should I check next??
I have an HP printer and have installed hplip in the hope of resolving some printing problems and having nicer, more consistent print dialog boxes. Unfortunately it wants dbus-python version .80+ and the current version is .70
I'm aware that centos is about stability and I'm guessing that a new version of dbus-python isn't likely to happen until centos 6-- right? So what's the best option? Can I find a newer dbus-python package that works with centos 5.2 or is that defeating the purpose of the OS? Do I have to choose between stability with printing problems and instability with better printing functionality?
Instead of changing the playback, these commands open a new Banshee window, and then I get 2 banshee processes running. I tried to get some help in Banshee's forum, and they said it's a problem with Dbus, more specifically, the variable DBUS_SESSION_BUS_ADDRESS is not set. If I run the following command, I get an empty line:
After an udate I get this error message: DBus error : Unable to get transaction id from packagekit. This error also shows when I click the yellow triangle. When I start the manual update this shows:
[code]...
It seems some shell is not there anymore. What to do?
Has anyone tried updating dbus in factory up to level 1.4 under openSuSE 11.3 x86_64 and continue to run KDE 4.4.4 Stable? Just wondering if it causes any issues or if it forces you to go to KDE 4.5.1 Factory. I've tried updating to 4.5.1 without, other thread, and the suggestion was to update dbus to 1.4 to correct speed issues.
I've just upgraded to 10.04. I love it. I've been running dark themes for a long time and this upgrade merged seamlessly with my setup.There is a nasty problem that I've noticed on only my desktop box (laptop is fine, also upgraded to 10.04). The dbus-daemon is hogging approximately 50% of my cpu cycles. Is there a way to limit this? I'm watching this via the System Monitor and the % CPU. My laptop registers its dbus-daemon % CPU as 0.
I have accidentally remove dbus which concludes removing everything including graphic-manager desktop and network manager. after removal system automatically rebooted and i only have command prompt to work with. Now i have no desktop and no network connections.
As i have lost network connections i can't apt-get any packages. so please help me with the solution?
I am a developer working on an application which needs to dial out via modem. The modem activation/deactivation is done programmatically by the application, which may be running unattended. The online time is billed by the minute at a very high rate so it is imperative that the dialler does its best to terminate a connection whenever signalled to do so by the application.
The preferred means of communication with the dialer would be via DBus, due to design/architectural considerations. The current solution relies on a DBus wrapper around pppd, but it has been found lacking in reliability (leaving connections open from time to time).I have already reviewed some candidates such as wvdial, and network-manager but unfortunately those were unsuitable.
I encountered a problem when send dbus method call message.Program A which runs as root user provides system-wide dbus service interfaces.When another program B with root permission send method call message to A,It received the error info:Error org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.41" (uid=0 pid=3397 comm="dbus-send --system --print-reply --type=method_cal") ...But when I run prgram B in generic user permission,localmachine for example,it success to send message.It confused me all the day.
I had my laptop turned on. The battery turned out low and my pc shut down (not in the correct way obviously)! Plus: I was running apt-get upgrade but it should have done before shutting down. Now, I restarted my pc and under nm-applet I see: "wireless network: device not ready" and at login I get the message: "Network configurations failed. org.freedesktop.dbus.error.spawn.PermissionsInvalid: the permission of the setuid helper is not correct" and that I could not be able to connect via bluetooth (but actuallyu I can't use wireless!)! What to do guys? I use debian squeeze. I read from someone using kubuntu that he solved the problem reinstalling all the packages with "dbus" in their name. But I don't know if my ethernet will work yet!
Update: if I run dpkg-reconfigure dbus, it tells me that dbus package is corrupted or not complete: could be the issue?
