Applications :: HAL And DBUS Fail To Start
Jan 21, 2010
I don't know if this is the right place to post this but here goes anyway.
System:
ASUS Pro50n Laptop
Distro: Arch Linux
WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
View 11 Replies
ADVERTISEMENT
Jan 24, 2011
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
View 1 Replies
View Related
Aug 19, 2010
I had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)
I ended up installing xubuntu 10.4 using the text mode installer.
The system basically works, I can not get gdm running.
dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.
The system is an old eMachines T1120
Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset
[Code]....
View 1 Replies
View Related
Jan 13, 2010
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies
View Related
Jul 5, 2011
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
View 4 Replies
View Related
Jun 22, 2010
I type this 10,20,30,40,50 * * * * /root/auto.pl
my log file
Jun 23 10:10:01 localhost crond[7702]: (root) CMD (/root/auto.pl)
Jun 23 10:20:01 localhost crond[12022]: (root) CMD (/root/auto.pl)
Jun 23 10:30:01 localhost crond[14610]: (root) CMD (/root/auto.pl)
Jun 23 10:40:01 localhost crond[18676]: (root) CMD (/root/auto.pl)
Jun 23 10:50:01 localhost crond[22402]: (root) CMD (/root/auto.pl)
Jun 23 11:01:01 localhost crond[29476]: (root) CMD (run-parts/etc/cron.hourly)
but my application doesnt run at all. my script is in perl language
View 5 Replies
View Related
Mar 17, 2009
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
View 2 Replies
View Related
Sep 4, 2010
Over the past few days, I've noticed that administrative tasks sometimes fail to start. I'm asked to enter the administrative password, "Granting rights" appears in the bottom panel for a few seconds, but then disappears. I'm using Debian Lenny. This is only an intermittent problem, and if a task does fail to start, it will start on the next attempt. Tasks which have failed to start are:
*Launching Synaptic form the System menu.
*Launching a root terminal from the Applications menu.
*Launching Nautilus with root privileges from a terminal using gksu.
After coming across the following post, I thought maybe it was an issue with kernel 2.6.32-bpo.5-686, because I'd recently upgraded to that kernel too, but I'm advised that that isn't so.It was suggested that something else from backports might be causing the problem.
View 14 Replies
View Related
Mar 14, 2010
My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
View 3 Replies
View Related
Dec 23, 2010
rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
View 5 Replies
View Related
Mar 7, 2010
I have installed freeradius from repositories in both Debian and Ubuntu. I have built from source with 'fakeroot dpkg-buildpackage -b -uc' on both the official freeradius source code and the source provided by apt-src in both Debian and Ubuntu. On a normal install via aptitude there is no ssl-support, I understand this is because of license issues. Otherwise is works, but is of course useless in a wifi-auth setup. On a install from source code, after editing debian/rules and debian/control as recommended different places on the net, freeradius fail to start because of ssl error. Same on install via source code downloaded directly from [URL]... Anyone have a working ssl-enabled freeradius server running Debian or the likes?
View 1 Replies
View Related
Aug 22, 2010
I have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies
View Related
May 19, 2010
I am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
View 1 Replies
View Related
Oct 30, 2010
since it started i cannot launch software-center, vlc, emesene... they all stopped working... i checked the logs of synaptic to see if i removed a python package and i didn't. i tried selecting all python packages for reinstall, and it didn't help! i really don't want to reinstall ubuntu.
View 9 Replies
View Related
Jun 7, 2011
I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies
View Related
Jan 6, 2011
OpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP
View 2 Replies
View Related
May 24, 2011
vsftp dose not work in my machine. I try to restart vsftp by command
Code: sudo /etc/init.d/vsftpd restart but it failed:
Code: Shutting down vsftpd done Starting vsftpd startproc: exit status of parent of /usr/sbin/vsftpd: 1 failed
View 9 Replies
View Related
Sep 16, 2010
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
View 2 Replies
View Related
Mar 19, 2010
reason my wireless is constantly failing. the only solution is a reboot but it will start to fail again. I use hp mini 210 ubuntu netbook remix.here is a log file
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (
[code]...
View 4 Replies
View Related
May 18, 2011
I have a problem when trying to start Cyrus IMAP (on Ubuntu server):
#./master &
[1] 1171
[1]+ Exit 1 ./master
I got a message from /var/log/message:
May 18 16:26:44 ldap master[1146]: process started
May 18 16:26:44 ldap master[1146]: unable to setsocketopt(IP_TOS): Operation not supported
View 4 Replies
View Related
Apr 23, 2010
I am having a RAID5 with a spare(total 4 disk).then the steps which lead me to a problem:
1. i was doing I/O on the array.
2. i pulled out a drive manually. So the spare drive took care of the failed one and started rebuilding. then
3. in the, mean time i pulled out the power plug of my NAS box.
4. After power up i saw my array was not active(by -D command option of mdadm). then
5. i executed: mdadm --assemble --scan /dev/md0 it gave me
I checked into the linux source and found that bd_claim is a function inside fs/block_dev.c and it failing due to which lock_rdev function (calling bd_claim in md.c) is failing and we are not able to start the array.I don't know why my RAID is not live after power on.
Plese help atleast can i save my data?
View 9 Replies
View Related
Dec 4, 2010
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
View 9 Replies
View Related
May 16, 2010
After upgrading Centos 5.4 cluster nodes to 5.5 all virtual services failed to start. All virtual services are marked as 'failed'. The reason: new /usr/share/cluster/vm.sh requires 'which', but this is not reflected in rgmanager-2.0.52-6.el5.centos.
Solution: run 'yum -y install which' on all nodes, and reboot cluster. Hope that will save somebody hours of downtime.
View 1 Replies
View Related
May 14, 2010
I am running Sid. After a dist-upgrade, when I boot into a DE, trying to run applications doesn't work.
If I click on an icon, I see a "Starting <Application>" icon on the task bar and then it dies. If I try running Alt-F2 and then typing the name of the application, nothing happens.
View 4 Replies
View Related
Oct 27, 2015
I use Terminator as my terminal and in the last couple of months, I need to either run
LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libfreetype.so.6 /usr/bin/terminator
or
symbolic link /usr/local/lib/libfreetype.so.6 to the above file
In order to have the application run without the error message: You need to install the python bindings for gobject, gtk and pango to run Terminator.
I have been using the symlink method for the most part, but when I run an apt upgrade, often the /usr/local/lib/libfreetype.so.6 symblink changes to point to /usr/local/lib/libfreetype.so.6.5.0 and I have to manually re-link.
I have tried reinstalling gobject, gtk and pango packages for python but nothing has worked.
View 6 Replies
View Related
Jun 29, 2011
Have been running F 15 with Gnome, no problems. Decided to install KDE to compare to Gnome. (I used KDE several versions ago). Desktop appears normal, however only some applications would open. Reinstalled KDE, again desktop appears normal, however now no applications open (including settings and file system).
View 2 Replies
View Related
Jul 29, 2010
one month I switch the workspaces(desk1 to desk2), and open some applications, then I tried to save them. till now even I close them always, but they appear after each startup.
View 1 Replies
View Related
Oct 12, 2010
I'm running the latest 10.10 and loving it, former Windows user I noticed just shortly after installing 10.4, that a few select applications would open and I would see "Starting (application name)" and then it would close and nothing else would happen. I suspect this is related to the fact that I recently took my Video Card out of my PC and Ubuntu is not detecting my Intel Chip?
View 9 Replies
View Related
Jan 8, 2010
I installed today's set of updates in CentOS 5.3, and now every time I start an some applications, X resets and I am logged out.I would appreciate any tips on diagnosing this problem.
View 1 Replies
View Related
May 31, 2010
It is possible to set a keyboard shortcut to start an application in KDE? As example, win+f to start firefox. I know it is an option in menu editor, but it doesn't work. From the many distros I tried with KDE ( openSUSE, Arch, Gentoo, Mandriva ), only in Fedora 12 worked this option, and I hoped it will in F13 too, this is one of the reasons I installed Fedora. So it is a bug, regression, or I am doing things not the right way?
View 2 Replies
View Related
