Today when I try to mount a samba drive on my Ubuntu 10.04 server, which worked before, I now get the error message below:
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)
Any ideas is much appreciate.
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies View RelatedI have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
Ubuntu 9.04-amd64 After a recent update every time I insert a cd/dvd or usb flash drive I get the following error popup.
View 1 Replies View RelatedI've had my Ipod working fine using both Rhythmbox and gtkpod until a few weeks ago. Now, I can't get my Ipod to mount. My external hard drive mounts fine, just not the Ipod. When I plug it in I get the following message:
"DBus error org.gtk.Private.RemoteVolumeMonitor. Not Found: The given volume was not found"
I've tried to manually mount it and that doesn't work. I updated from Jaunty to Karmic hoping that would solve it. It didn't.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
I've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:
Code:
[My Documents]
guest ok = no
comment = %u's Documents
[code]....
I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.
my samba server is working properly but i want to mount it permanently on linux (red hat) client.i have tried /etc/fstab and also autofs service but both are not working for me.
1. /etc/fstab i made the following entry in it //192.168.0.254/myshare /temp smbfs credentials=/root/pass 0 0 and when i use comman mount -a it shows "unknown filesystem smbfs" why this is so?
2. using autofs
my auto.master file is shown below
#
# $Id: auto.master,v 1.4 2005/01/04 14:36:54 raven Exp $
#
# Sample auto.master file
[code]....
im trying to get a network setup i followed the instruction via gentoo wiki samba what i have done
[Code]...
then i did chmod 777 to the shared folders on both machines went into nautilus it sees the folder but it will not mount the folder showing the error msg:"unable to mount location failed to mount windows share" ive been searching unbuntu forums opensuseforums and google for an answer to this issue but as of right now anything that i have tried to do has failed and nothing seems to be working.
I've just loaded a laptop with Ubuntu 10.04, and I am unable to mount a samba share from an older Red Hat server. The problem first occurred when I tried using "Places -> Network" or "Places -> Connect to server", and the server's log gives me something like this
[2010/08/03 15:40:38, 1] auth/auth_server.c:check_smbserver_security(363)
password server 10.100.1.2 rejected the password: NT_STATUS_LOGON_FAILURE
[2010/08/03 15:40:38, 2] auth/auth.c:check_ntlm_password(319)
[code]....
"Unable to mount iPhone DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered" The above error appears upon plugging in my iPhone 3GS using a USB connection on Ubuntu 10.04. Attempting to transfer tracks to the iPhone (using Rythmbox) results in this error: "Error Transferring Track Error while getting peer-to-peer dbus connection: The name :1.140 was not provided by any .service files"
The interesting part is that I can unmount the iPhone get back into Nautilus and the iPhone icon will still be there on the left side pane. Unmounting from Nautilus does not get rid of the iPhone icon until I physically disconnect the USB cable from the iPhone. Clicking on the unmount/eject icon next to the iPhone icon in Nautilus removes the unmount/eject icon, but it does not remove the iPhone from the left side pane. My other USB devices, such as the 2TB external iOmega hard drive, exhibit identical behavior. I'm guessing that this is a gvfs bug since it appears very similar to other gvfs bugs that I've found from a couple of years ago. I am using gvfs 1.6.2-1ubuntu1~ppa1.
My iPhone used to sync work perfectly using this same Ubuntu PC as late as November 2010. There were no changes made to the iPhone, only updates to Ubuntu -- I'd like to emphasize updates; no new software was installed on this Ubuntu PC.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedServer: Ubuntu Server Edition 8.04
/currently firewalled to only allow client ip
Client: Ubuntu Desktop 8.04
/currently firewalled to only allow server ip
Same userid and groups set up on on both. I have taken two linux courses and can maneuver around fairly well, but am still pretty newbie at all this. We have loaded Samba on a server and created a Samba share. I AM able to access that share via Windows Vista, but have not been able to successfully mount the share on the Ubuntu desktop via the fstab file. I have tried the following ways: serverip:/path/shareddirectory /net ext3 user,sync 0 0 and the samba way..
//serverip/sharename /net smbfs username=x,password=x
After modifying fstab, I reboot. No luck since that either way.Only ONCE after modifying it samba way, I was prompted to enter credentials, but after login I was unable to view the files on the server. From this point on either way, if I run commmand 'mount -a' the response is "Special device serverip:/path/sharedirectory does not exist" Also! I am able to ping client-to-server, but not server-to-client.
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
I have a samba share that I mount locally at boot through fstab. The share is writable and if I access the share directly, say with konqueror and smb (smb://hostname/sharename) then I can do anything I want (create, write, delete, edit, files/directories). I have a mount point on my local machine
Code:
/shares/mp3
and I (username dtest) was unable to do anything except read files and create directories trying to do them to the local mountpoint except as root. I figured it would be a matter of
Code:
chown -R dtest /shares/mp3
but I was unable to do that even as root, I kept getting permission denied. When I did
Code:
ls -alt /shares/ it told me the owner was 1000 and the group was root. Dtest was already a member of the root group and I was able to
Code:
chmod -R 774
as root but I still couldn't do anything except read and create directories directly via the mountpoint. Ultimately I solved this by changing the uid of user dtest via kuser and then just chowning my home directory back to dtest. It seems like as root I should be able to change the owner of the directory. I know it's because this is a samba share, but it doesn't make any sense why root couldn't just chown it. Is there another way to change the owner of a directory, or is this set by the machine hosting the samba share?
The scenario like this. I'm working on Ubuntu 10.10. I've enable samba sharing with full guest access enable. In my office I had another server (CentOS 5.5) installed just for me and I've created a Apache VirtualHost which root document pointed to share folder on my comp
This is my fstab setting
//my ubuntu computer name/sharing/www /media/www cifs context=system_ubject_r:httpd_sys_content_t:s0,username=username,password=******,iocharset=utf8,fi le_mode=0777,dir_mode=0777 0 0
After label the mount folder as httpd_sys_content_t the Apache web server working in correct way (duno much but at least it can index files and excute some php code so) then the troll come in : if some file was created by my ubuntu (personal comp) then the file would be listed in Apache virtualhost correctly.
But if I'm ssh to CentOS server goto /media/www which was mounted to my unbuntu computer. Then type command like $mkdir something Suprising that folder ./something could not be accessed by Apache anymore except I remount by umount and mount it again or "setenforce 0" What is wrong with my system can anyone point me out of this headache
I am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this:mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000.I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has?
Mount the remote samba with multiple groups on the local system?Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs.which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
Unable to mount (DVD name) DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending I recently upgraded to 9.04. Installed medibuntu, ect, but still have this problem. I did not have the problem when I was using Hardy. The DVD I used yesterday was named "TNGS3D1", and though it showed up under places, clicking on the icon (right or left clicks) gave me the message above. Restarting and manually ejecting the DVD did nothing for it. I was able to finally mount the DVD yesterday, and operate it properly, after having this probem for several hours. I don't know why it suddenly worked, or why it doesn't now.
After using the DVD, I unmounted the icon on the desktop, but it is still listed under places. Today, I went to use another DVD, called "TNGS3D2". Again, it is listed under places, but it does not show up on the desktop. clicking on the icon just gives me the message again. Actually, now that I've typed all this, it's shown up on the desktop and works properly. (after approx. 20 min since closing the DVD tray) Is it jut slow? What can I do to fix all this? Why is yesterday's DVD still listed under places?
I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedI have shared few directories through nfs in my fedora 12 OS.Here is the output of few commands from the virtual machine running on CentOS in both normal and rescue mode
Code:
[root@localhost /]# showmount -e 192.168.0.3
Export list for 192.168.0.3:
[code]...
I'm pretty new to using Linux and I installed SUSE 11.3 on Sun Virtual Box to play around with it. I am trying to mount one of my Windows shares to my SUSE system and I'm getting an error "Mount error(13): Permission denied". I have made sure my Windows permissions are open, in fact I used a test share and added everyone and gave full control. Below is the command I tried to use to mount it.
mount -t cifs -o username=Nick //computername/share /mnt/temp
I pre-created the temp folder under mnt and I tried both my PC name and my ip address in the above command with the same error each time. I also tried using my pc name in my username string as well "username=pcname/Nick" and that did not work either. Can someone advise me why this error is occuring?
Kernel version: 2.6.34-12
Thanks,
Nick
After an udate I get this error message: DBus error : Unable to get transaction id from packagekit. This error also shows when I click the yellow triangle. When I start the manual update this shows:
[code]...
It seems some shell is not there anymore. What to do?
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies View RelatedI just installed 11.2 kde 64 bit and I get this error: DBus error : Unable to get transaction id from packagekit. How do I correct this?also: the other updates have been running for a hour and they're still running. is this normal?
View 3 Replies View RelatedI need to mount two Samba shares from my Ubuntu Server to my Desktop they are:
[shared]
path = /media/share
read only = no
guest ok = yes
[www]
path = /var/www
read only = no
I made two directories in my home folder on the desktop called share and www how do I mount these now? I have to use the terminal btw.
If I run the command: smbclient -L //192.168.10.101 which is the IP of my server it works.
Can I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.