Software :: Modem Dialer (not GSM/3G) With DBus Interface?
Feb 12, 2011
I am a developer working on an application which needs to dial out via modem. The modem activation/deactivation is done programmatically by the application, which may be running unattended. The online time is billed by the minute at a very high rate so it is imperative that the dialler does its best to terminate a connection whenever signalled to do so by the application.
The preferred means of communication with the dialer would be via DBus, due to design/architectural considerations. The current solution relies on a DBus wrapper around pppd, but it has been found lacking in reliability (leaving connections open from time to time).I have already reviewed some candidates such as wvdial, and network-manager but unfortunately those were unsuitable.
View 3 Replies
ADVERTISEMENT
Oct 12, 2010
I'm using handbrake to encode some dvd's and am trying to use the autoshutdown feature. It does not work.However, handbrake does not seem at fault here. When I check in qdbusviewer, there is indeed no shutdown method in the org.freedesktop.PowerManagement interface. This does not seem normal, although I have the same problem on 2 suse 11.3 boxes.Through this post, I started fiddling with policykit settings, but it doesn't change anything.Does anyone know a solution to this problem? Do you have these canShutdown/shutdown methods?
View 2 Replies
View Related
Dec 17, 2010
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies
View Related
Jan 24, 2011
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
View 1 Replies
View Related
Jan 13, 2010
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies
View Related
Jul 5, 2011
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
View 4 Replies
View Related
Mar 17, 2009
I'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
View 2 Replies
View Related
Apr 18, 2011
how configure a call center soft-dialer. I just configure freePbx on centos 5.3 and i also configure the internal extension. But i cant understand how to configure outbound & inbound settings on freepbx plz help me, and can anybody help me how to compile the lead management and auto dial of the lead features in freepbx, which software do that and what is the compile method
View 1 Replies
View Related
Jan 28, 2010
I'm trying to use as few KDE packages as possible in Xfce and yesterday found and installed Chestnut-dialer (./configure, make, make install).When trying to run it as a user it gives the message, "pppd:must be root to run pppd."Apparenty you have to set the pppd UID for root. Once done it will make the connection as user, but you can't "go anywhere." That is the e-mail client, browser, etc., report they are not connected.So far the only way to get it to work is to open a terminal, sign on as root (su) and fire up Chestnut-dialer from the command line.
View 3 Replies
View Related
Dec 21, 2010
I am trying to get my father to quit using Windows. His only demand is that he be able to have a nice contact manager. Evolution looks like just what he needs, but it seems to be missing one key feature: a phone dialer (don't confuse this with a dial-up Internet dialer or a VOIP applicaiton; those are not what I am looking for). What I want to know is:
1.) Is there a simple phone dialer for Gnome (like Kall for KDE)?
2.) Can it be used with Evolution (or is there an Evolution plugin to do this)?
3.) If there is not way to do this with Evolution, is there another Gnome contacts manager/calendar/task scheduler that has this capability?
I guess if I can't find one, I'll have to go to Kubuntu since it appears to be able to do this with Kontact, but I really prefer Gnome so I would rather not have to do that.
View 2 Replies
View Related
Dec 22, 2010
I newly installed ubuntu 9, but I am not able to setup the internet dialer. I am not using cable modem. Lan cable from my isp's switch is directly connected to my Pc's ethernet card. In windows XP one dialer is created using Rasppoe. In ubuntu I tried it using pppoeconf command but itis notable to setup the connection.
View 3 Replies
View Related
Apr 2, 2010
can any one there tell me how to make broadband connection dialer on linux which ask for username and password as on windows for connecting to the internet
View 3 Replies
View Related
Apr 14, 2010
I've bought a Conceptronics CPHONELU (C01-200) VoIP USB phone. I would like to take full advantage of my VoIP phone in Linux. Currently I'm using Sip Communicator as the softphone, but I tried x-lite 3.0 on Windows too. The phone works has like a regular headset, I can hear and speak without a problem. However I cannot take full advantage of the phone, since the phone keyboard only work in Skype through the Skype Portal software that come bundle with the phone (Windows only). Is there a driver that I can use in order to be possible to dial using the phone and display the called ID with a regular softphone?
View 2 Replies
View Related
Mar 13, 2010
I use Huawei EC1260 modem for mobile broadband connection. What are the command line shell based ppp dialing applications available apart from wvdial? insight how to use pppd/chat directly.Actually wvdial is working on debian very well with this modem. But I need to use it on an arm le based system, where wvdial does not work properly because of setcontext(), getcontext() dependency on arm platforms.
View 2 Replies
View Related
May 21, 2011
I'm using redhat linux 9 n unable to connect to the internet.my isp is log2space..they have given me a username n passwd which works in windows OS..have no clue how to setup a dialer or how to config in redhat 9
View 2 Replies
View Related
Jul 29, 2011
Wvdial give me this error
PHP Code:
--> WvDial: Internet dialer version 1.60--> Warning:
section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
View 1 Replies
View Related
Mar 9, 2010
I am using WINDOWS 7, in which i connect to the internet through broadband connection dialer wich requires username and password,aslo i have another connection wich is used to connect to LAN. I hav recently installed ubuntu 9.10.. Now my WIRED connection is showing established..with eth1 and following are the outputs of some coomands which might help u to identify the problem..
[Code]...
View 8 Replies
View Related
Jul 27, 2010
I'm trying to resolve an issue with a dial up modem and really need some help. I haven't used dial up in many years and not even sure how to approach the problem. Making matters worse, I haven't had a landline phone in years, so am trying to troubleshoot this problem and each time have to take it back to a friend, for whom I have installed Kubuntu 10.04. All works fine on my high speed ethernet and wireless, but I can't get the dial up she needs to work.
The system is a Compaq Presario V2000 laptop. KInfoCenter reports an ATI Technologies SB400 AC'97 Modem Controller. I know the modem hardware is fine, as it was working perfectly when I removed Windows XP and installed Kubuntu 10.04.I tried using KPPP, however KPPP will not let me set the DNS to Automatic...it is grayed out. So, I've installed both wvdialer and Gnome Dialer. Gnome Dialer seemed to set up fine and all user info. number to dial, etc. was set up.The problem is that when a telephone line is connected to the modem and you attempt to dial, no dial tone is detected.I don't know how to approach this, not how to troubleshoot it. I would be happy to provide any logs or output here, if someone can tell me what to do.
View 7 Replies
View Related
Mar 15, 2011
I am using Ubuntu 10.04 LTS the Lucid Lynx and gnome interface.
I have just installed a broadband USB device that was detected and all properties were shown.
I don't know to get it dialling to the service provider or what dialler shall I use
View 4 Replies
View Related
Jun 10, 2010
with installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Feb 14, 2010
I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies
View Related
Jul 18, 2011
I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
View 8 Replies
View Related
Feb 3, 2010
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies
View Related
Jun 17, 2011
I have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
View 2 Replies
View Related
Apr 11, 2011
i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
View 8 Replies
View Related
May 20, 2010
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
View 4 Replies
View Related
Feb 26, 2011
When I do...# iptables -L...I see rules in my INPUT and OUTPUT chains that look scary:ACCEPT all -- anywhere anywhere...but these rules only apply to the loopback interface. I tested it and the server cannot be reached on open ports from the outside world. How can I make iptables show the interfaces that the rules apply to?Otherwise, every time I do iptables -L it will scare the crap out of me.
View 3 Replies
View Related
Apr 14, 2011
I found multiple sites explaining how to add IPs to a network interface as virtual interface like eth0:0. However I can add IPs to an interface as well using the ip command: ip a a 192.168.2.2/24 dev eth0 What I want to know is how I can make this persistent on rhel/centos.
View 2 Replies
View Related
