SInce I upgraded to 13.1 I get the above error with lots of programs. I check the D-BUS with /etc/rc.d/rc.messagebus status and it says the D-BUS daemon is running. What should I check next??
View 1 RepliesI use Debian Squeeze with Banshee 1.6.1 and I'm having a problem with some commands in Banshee via terminal:
$ banshee --play
$ banshee --stop
$ banshee --next
$ banshee --previous
Instead of changing the playback, these commands open a new Banshee window, and then I get 2 banshee processes running. I tried to get some help in Banshee's forum, and they said it's a problem with Dbus, more specifically, the variable DBUS_SESSION_BUS_ADDRESS is not set. If I run the following command, I get an empty line:
login@host:~$ echo $DBUS_SESSION_BUS_ADDRESS
login@host:~$
I searched in google and I found some solutions that worked for other distros, but in Debian they are not working.
hypothetically speaking, can i write a script in which a telnet session is opened and then some more commands are forwarded to that session?
View 4 Replies View Relatedi installed compiz fusion on my slack 13.1 i installed in the good order all the packages nevetheless when i try to use DBUS in command line i don't have any response from compiz
here is one example
Code:
dbus-send --type=method_call --dest=org.freedesktop.compiz /org/freedesktop/compiz/switcher/allscreens/next org.freedesktop.compiz.activate string:'root' int32:`xwininfo -root | grep id: | awk '{ print $4 }'`but no reaction .what can i check to have a functionnal DBUS ?
I am running 64-bit current. I have not identified which update started the Dolphin crashes, but it recently has been happening very often, usually within a few seconds of starting it, but not always.
Googling suggested that it might be a dbus issue, so I rolled my own package using dbus-1.4.0 and the slackbuild from the 64 bit current source.
Dolphin has been rock solid since. I noticed that there was an 'allow root globally' patch which I commented out. I am guessing that this may affect applications that I have not used yet or the issue has been fixed in version 1.4.
I have not seen any evidence that other current users have had this problem, but maybe Robby would consider an upgrade?
do have installed glib and dbus and can find them manually , /usr/include/glib-2.0/glib.h , but while comipling applicaiton it gives following error messages.
/usr/include/libosso.h:32:18: error: glib.h: No such file or directory
/usr/include/libosso.h:38:23: error: dbus/dbus.h: No such file or directory
/usr/include/libosso.h:39:32: error: dbus/dbus-protocol.h: No such file or directory
I was playing around with bash scripting and the last thing I remember doing was checking for suid root files. However now I cannot launch sbopkg, tpfand etc and the binaries are nowhere to be seen. I was experimenting with the sticky bit for tpfand so I could load it as a normal user.
Code:
chmod u+s /usr/sbin/tpfand
chmod u-s /usr/sbin/tpfand
However now tpfand is no long in /usr/sbin. But a whereis produces the following results.
Code:
tpfand: /etc/tpfand.conf /etc/tpfand.conf~ /usr/share/tpfand
The same applies for sbopkg, which I have not touched. I think this problem is also related to the wicd error stating it cannot connect to DBus client From these symptoms has anybody experienced anything like this before from tinkering?
I do a clean install of slackware64 13.1 beta1 with KDE and switch default runlevel to 4 in /etc/inittab.
I try to login in kdm, I always come back to the login....
I try this with default runlevel 3 and an .xinitrc with "ck-launch-session startkde" .. works without problems, so I switch back to default runlevel 4, now i can login and only get the error "Cannot open ConsoleKit session: Unable to open session..."
Here are some logs
syslog
Code:
Code:
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies View Relatedwhen I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
I installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.
View 4 Replies View RelatedI'm not sure what when wrong since I have a few DVDs and they all play well in my normal DVD player, I later attempt to mount it in my Ubuntu 8.10 I'm presented with the following message:
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
May I know what does this really mean?Is there something in my computer that require a fix?
I have installed ubuntu Server 9.10 [ubuntu-9.10-server-i386]in ma machine. After giving the command startx i couldnt goto gui . It saying x session : warning: x rdb command not found resource not merged.
View 1 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
When in an SSH session I modify my command prompt by appending (ssh) to the command prompt string. Works nicely to remind me I'm in an SSH session.I also modify the prompt command by inserting the host name, but the (ssh) string really helps.Works nicely until I run the su - {username} command. Using the "-" option ignores the original SSH environment variables that are created.Of course, when not using the "-" option then the original SSH environment variables are preserved.Any ideas how I can determine I am in an SSH session to modify the command prompt after using the "-" option?
View 7 Replies View RelatedI am installing Slackware on a friends computer soon and I want to be able to log into his machine from home so that I can run updates and such for him. What programs do you guys recommend for this, freenx, realVNC, etc?
View 1 Replies View RelatedI have been using vim for years without problem but today I have met one weird scenario which I can't solve it after troubleshoot for the whole day and google around. This happen to my 2 machine at home which both installed with Slackware 13.1..I just got my laptop done setup with Slackware 13.1 and I ssh from my laptop to my desktop that have vim installed. I use one of my laptop virtual console to do the ssh login to that desktop.
And using vim in that laptop virtual console and Konsole itself, all works fine. The problem only occur when I ssh into the desktop using a virtual console.It seems like if I supply the vim specifically a .vimrc, it will work fine. It seems like it's taking forever to find the .vimrc file. But if I remove that .vimrc, it will also freeze. If I create a new user in that desktop and ssh again and then do vim, it will also freeze.Any one face this strange problem before ? I know I can still use Konsole to ssh and do vim, but I wish to solve this and since vim is been there for so long, I think this problem will most likely faced by someone before.
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
Does anyone know how to do a 'shadow' session with freenx client, qtNX?I don't see any options in that particular client to 'attach' or 'shadow' a current X11 session. Does anyone have a slackbuild for nomachines NX client?
View 2 Replies View RelatedI'm using slackware 13.1 now (dual boot with win7) and recently, my slack oftenly freeze on it's own while i use GUI session (KDE4) i can't use ctrl+alt+del or prtsc+alt+REISUB it's just like my notebook absolutely freeze.
View 11 Replies View RelatedI have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.
Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.
I installed freenx-0.7.3-i486-1alien.tgz on the server (with Slack 12.1), all according to instructions. I installed the no machine nxclient 3.4.0-7 on the client (with Slack 12.2). I ran setup and configured. I used the default no-machine keys, not custom ones. Since authentication failed at the beginning, I enabled DBauthentication, and added my user and password, which seemed to allow authentication to occur.
Here is my node.conf:
# node.conf
#
# This file is provided by FreeNX. It should be placed either into
# /etc/nxserver/node.conf (FreeNX style) or /usr/NX/etc/node.conf
# (NoMachine NX style).....
Slack 13.0 X sometimes fails to start after boot about 50% of the time. linux says "starting X11 session" then I get a blank screen with a flashing cursor and absolutely nothing else. I can <ctrl>-<alt>-<F7> and get a text prompt, log in, and startx from a command prompt. After that, I can reboot once or twice and still get a graphic login, but will soon revert to the dumped condition. I have reinstalled X and KDE twice now as well as deleting my .kde folder. This condition started when I inadvertently ran out of disk space on my /home drive. Since then I have migrated /home to a larger drive and watch it's disk space very carefully.
View 14 Replies View RelatedI have a question regarding runlevels, shutdown procedure and KDM. I am on a freshly installed Slackware64 13.37 multilib system. The default runlevel in /etc/inittab is set to 3: multiuser w/o X.
Now, I log in as root and issue the command:
Code:
As expected, KDM starts up, and I log in to KDE (or another WM/DE) as a normal users. When I am finished, I either issues
Code:
In Konsole or click on Shutdown in the KDE menu. The shutdown process is initiated, as expected, but then it stops, and a window alerts me, that there is a session open by user 'root'. If I click OK, the machine is finally shut down.
Now, if I interpret this correctly, the behaviour of Slackware64 13.37 has changed here, compared to 13.1. In previous versions, the root seesion was closed, when I changed the runlevel to 4 with the telinit command. Now, the session remains open, obviously.
My question is: Is this the correct behaviour, and isn't this a security whole? An unnoticed (!) open root session while I am surfing the web as an unprivileged user in KDE could be dangerous, I think...
Is it misconfiguration in my system, or is this the way it should be?
I want to configure my tightvnc server installation to use my already running X session (on current :0 screen), but as i understand its not really and its working only at another screen. How can I configure to use it on my current screen?
View 2 Replies View RelatedI was just mucking about in xfce, trying out new window buttons in conjunction with the black theme - dusk?? - when POW! - X shut down. Rebooting didn't restore things. Error is along these lines:
xfce4-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0. xfwm4: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
[Code]....
Is there a config file I can edit to get away from the window button setting it dislikes, or is reinstalling xfce the only option?
I have a very bad attempt at hashing the components of an tcp session to assign/locate the session in a hash table bucket. I am pretty sure that it has a very high collision rate and when there are a very large number of tcp sessions my application is having to search a long linked list to find the session within the bucket.
All the hashing functions I have found take a single string input where I need to input several integers and hash them into a single result. My guess is that any real hashing function is going to produce better results than what I am currently doing.
[Code]...
Problem :A couple of programs I use (or would like to use) seem to be unable to locate "gdkpixbuf.h". This kind of error occurs, every-time :
Code:
/usr/include/gtk-2.0/gdk/gdkpixbuf.h:37:35: fatal error: gdk-pixbuf/gdk-pixbuf.h: No such file or directory
Now, I realize, this file that is being looked for, is over at "/usr/include/gdk-pixbuf-2.0/gdk-pixbuf/",
[code]....
this is the library needed by CD-burner k3b. I wonder which package contains this library.
View 1 Replies View Related