Ubuntu Networking :: Unable To Connect With Windows 7 Shares
Dec 20, 2010
I have a machine with Windows 7 Ultimate with several shared folders. Then I have VMWare with Ubuntu 10.10 as guest running. Samba runs in Ubuntu and in Windows, I can see the shared folders of the Ubuntu guest (read and write) as well. This morning I saw the shared folder of the Windows host and I could still open it manually in the Ubuntu guest. After this, I wanted to mount the folders permanently with fixed entries in the /etc/fstab. This failed and now I can't see the folders of the Windows host in the Ubuntu guest..
View 3 Replies
ADVERTISEMENT
Aug 17, 2010
After running updates earlier today, none of my Ubuntu-based computers can connect to any Windows shares in Nautilus.Samba is running and working fine; I can access the shares via web browser using smb://hostname, so I know it's not an issue with Samba not working.Also, the two Windows-based computers can see each others' shares, including printers.
View 3 Replies
View Related
Mar 2, 2010
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
View 5 Replies
View Related
Oct 26, 2010
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
View 9 Replies
View Related
Jan 15, 2009
We are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"
View 8 Replies
View Related
Jul 1, 2010
I updated one of my windows boxes from XP to Windows 7 and now my Ubuntu boxes cannot connect to the shares on that windows box! I have done a lot of research on this and anything I try does not work.
View 1 Replies
View Related
Apr 9, 2010
I installed 11.2 a couple weeks ago on a machine at work, and thru YaST connected to the domain. I was then able to add a printer, and thru nautilis browse to windows computers with shares. Something changed about a week ago and I've played with everything I can think of, read lots of tutorials, and still can't make it work. I'm about ready to format and reinstall from scratch and try again, as I'm out of ideas.
So the way it was before, in nautilus if I clicked on network it would give me a list of all sorts of computers on my domain, and if I clicked on one of the windows machines it would ask me my username/password, and after I entered them, I'd be in.
Now, in nautlis if I click on network it shows me "windows network" and if I click on that it gives me a list of all sorts of workgroups and domains (or something like that). If I click on the one with my domain name, it asks username/password but it doesnt work.
I've tried leaving the domain and rejoining, I've enabled and disabled kerberos, ldap, samba, everything I can think of - although I dont think I had to change those at all from default the first time.
I dont know what I could have done between when it worked and now. I did allow some installation of updates. Shortly thereafter I noticed ssh no longer worked, and after playing with it forever I couldnt make it work, I uninstalled openssh and then reinstalled it from the repository, and it worked again. No idea why it stopped working, but maybe it's related to this domain problem, I dunno.
My main goal at this time is to be able to access windows shares from the linux machine. I don't care if I have to login to linux with my windows domain account or a local account (although all the documentation I've followed said that I should be able to login with a domain username/password too).
View 3 Replies
View Related
Jun 8, 2011
I am unable to list windows shares from terminal. I am getting the following error,
Code:
root@ubuntu:~# smbclient -L 172.29.33.10 -U karthick
params.c:Parameter() - Ignoring badly formed line in configuration file: # Samba config file
WARNING: The "Share modes" option is deprecated
Unknown parameter encountered: "read Size"
[Code]....
View 1 Replies
View Related
Feb 14, 2010
I have a network of 5 Windows Machines and 1 Linux Server. I created a Filemaker Pro Database on a windows machine and share it with the other machines through web publishing (only locally). - On any Internet browser, they only have to go the IP of the computer hosting the database - http://192.168.1.99:120 to enter & use the database, and all the other windows machines connect perfectly.
However, when I type the same IP(+port No.) into Firefox on my Linux computer, it can't reach the windows computer with the database (It just times out). Is there a firewall preventing it from connecting to other computers on the network, or do I need to update firefox or run another Internet browser or install Samba? I don't have much experience with Linux, as a programmer set the server up for me, so a simple solution with as little programming as possible would be fantastic.
View 6 Replies
View Related
Dec 19, 2009
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
View 4 Replies
View Related
Jan 13, 2011
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code:
peter@Desktop:~$ ls /net/10.2.1.21/
opt
peter@Desktop:~$ ls /net/10.2.1.21/opt/
sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
View 4 Replies
View Related
Jul 18, 2011
I'm trying to use Windows 7 to connect to a Samba server (running Ubuntu 11.04).
Server is named Mars. Below is my Samba configuration file. I can ping the server, and connect to it via RDP and ssh, so i know its not a network connectivity issue. What else could it be?
Code:
[global]
log file = /var/log/samba/log.%m
server string = %h server (Samba, Ubuntu)
winbind enum users = no
force group = nobody
[Code].....
View 8 Replies
View Related
Aug 1, 2010
Simply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
View 9 Replies
View Related
Dec 21, 2010
I have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
View 1 Replies
View Related
Jan 31, 2010
I've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
View 8 Replies
View Related
Feb 16, 2010
i have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
View 3 Replies
View Related
Feb 3, 2011
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
View 6 Replies
View Related
May 23, 2010
on 10.04 I clicked to share my music folder with the network (other computer also having 10.04) and it installed samba for me. I restarted expecting to find sharing working as it had on the other computer by doing the exact same thing. But for some strange reason I can't access the shares on either computer through the network workgroup. It just says "Unable to Mount Location".
View 7 Replies
View Related
Oct 15, 2010
i have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
View 2 Replies
View Related
Feb 13, 2010
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies
View Related
Feb 27, 2010
I setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
View 7 Replies
View Related
Jul 9, 2010
Been trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
View 9 Replies
View Related
Nov 9, 2010
when I try to access the shares from a Win98 laptop. The server name shows up in the Network Neighborhood (freaking childish names!) but when I double-click it, Win98 keeps asking me for the password for the \SHOPIPC$ connection. I have deleted the .pwl file on the Win98 and logged in using the same user/pass combination as I do on the Linux. On the Linux, I ran 'smbpasswd -a derek' and supplied my password.Windows XP sees the server just fine, but Windows 98 just does not want to play nice. Is there any thing that I can do to fix this without breaking the connection to the XP box or the Linux laptop?
View 9 Replies
View Related
Mar 3, 2011
My computer running Ubuntu 10.10 cannot see the Samba shares on either of my two Windows XP machines. I have Samba installed and configured, I am on the correct workgroup. However, under "Network", there is only one item - Windows Network, which contains no workgroups. I am hosting a share on this Ubuntu PC, but I haven't had the time lately to see if I can view it from the Windows XP computers. If I click Connect to Server, and enter the IP Address of one of my XP computers, I can connect to them. However, if I enter the computer's name I get "Failed to retrieve share list from server" without a specific share, and with it I get "Failed to mount Windows share."
View 2 Replies
View Related
Oct 4, 2010
this subject seems to have been touched a hundred times, but after following all the advice google could provide, i'm still unable to mount cifs shares as user, here's the fstab line
<server> <mountpoint> cifs rw,noauto,credentials=/etc/gattonauth,uid=1000,gid=1000,dir_mode=0770 0 0
i've chowned the mountpoint to the user,
ive tried
chmod +s /sbin/mount.cifs /sbin/mount.cifs
suggested by http://www.linuxquestions.org/questi...-lenny-711337/
View 9 Replies
View Related
Mar 26, 2011
clean install of Slackware 13.1 64-bit. From day 1 I have been unable to browse Samba servers and shares on my home network. NFS, FTP, SSH, etc all seem to be working fine. I've been updating it regularly in case this was a bug, but I'm not so sure any more.
Reboot in WinXP sp3, I can browse fine. My wife's Win7 laptop works fine. My old Slack 12.2 system worked fine. I have not made any changes to the network other than adding this computer to the mix.
Pentium Dual Core e6700 @ 3.2GHz
Asus P5G41T-M/CSM
4GB DDR3 Ram
1 TB Hitachi SATA
Gigabyte ATI Radeon HD 5670 1GB Video PCIe
[Code]....
View 2 Replies
View Related
Jan 6, 2011
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
View 4 Replies
View Related
Jun 13, 2009
I'm just staring with fedora 11 and I want to know how to do the following:
1- Connect to windows shares on another PC.
2- Set these shares to be accessible in the Computer location at all times.
View 2 Replies
View Related
Dec 8, 2010
My question is that I have a handful of servers, Server 1 is a Suse Linux machine and Server 2 is a Windows Server 2003 machine. I can mount and access the files/shares on the Linux machine no problem but when I come to using the Server 2003 shares I encounter problems ... here is a snip of my fstab ...
Code:
//10.0.0.20/applications /myfolder/applications cifs username=user1,password=pass1,auto,uid=user2,gid=group2,0 0
user1 and pass1 is the username and password of a user (local to the remote machine) and user2 and group2 are taken from the machine performing the mount.
Am I doing it right, is that how I should be mounting a share from a (Domain enabled) Windows Server 2003?
View 2 Replies
View Related
Jan 25, 2010
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies
View Related
