General :: Ubuntu 10.10 Blank Screen On Startup?
Nov 25, 2010
and I've had Ubuntu Linux (10.10) for maybe a month and a half now. Im very satisfied with the whole system, no problems up until an update about maybe 2 weeks ago from today (rough estimate). Anyways, when I start my computer and choose to start Ubuntu, about half of the time it will load with some weird new login screen (because of update), and their are other times where the screen will go blank. I dont think its very safe to cut the power from the computer through the power button :/ I realize there are other posts regarding this, and I apologize if this is against the rules, I just thought maybe it would be appropriate to start a thread with this problem for 10.10 users
View 2 Replies
ADVERTISEMENT
Jan 3, 2010
I've recently installed the 64bit version of WUBI on ASUS K50IJ with windows 7. Everything went smooth however when I try to boot into ubuntu, it shows that all the drivers are loading, I can even see the desktop background image for a second and then the screen goes blank. It is still ON however nothing is showing on it.
Pressing "CTRL+ALT+DEL" reboot the system.
even get access to the console for further debugging?
View 9 Replies
View Related
Aug 31, 2010
i recently was trying to install the ubuntu 10.04 in a machine with a 2x xeon processor but i'm getting some errors.In the installation first (and second, third...) try, the splash screen just freeze.After a lot of tries, just when i actived the acpi=off, noapic and nolapic, i finaly mounted the virtual desktop but after the succesful installation the machine wont boot! Only thing i get is a blank screen with a blinking dot on the left top.? it probaly somenthing related to the things i actived in grub boot, but i'm new to linux and can't find the problem! i can acess the ubuntu via hdd. I edited the boot on grub menu removing the "quite splash" from it and added "nolapic" in there place.Only thing left was the OS are now too slow. He works fine for 5 seconds and completely freeze for 2 seconds, then work for 5 secs again.
View 1 Replies
View Related
Apr 26, 2010
I've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz)
512MB RAM
40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
View 9 Replies
View Related
Aug 23, 2010
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies
View Related
Nov 13, 2010
when trying to startup Ubuntu 10.04 the screen goes blank and says no signal. But there are three Ubuntu's to chose from. the middle one will boot-up and works all right. But for when it is starting up the screen flashes and comes back on. the top one doesn't work at all screen goes blank but the lights on tower stay on.
the bottom one starts to boot but when it gets to the screen for your id and pass. it goes all blank but for a white line on the right side of the screen. this is on an old e-machine with a dual boot windows xp home. currently with 1g of ram and a 160gb hard drive split in two. with an AMD processor and ATI graphics on board. cant remember the numbers after that come after Ubuntu on the grub it is listed three times. how do you remove the other. let me know if you need more info.
View 5 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Sep 3, 2010
Basically i install Ubuntu using a boot CD and it install 100% but after i restart my desktop the screen just goes blank, i can run it of a live CD.The same thing happens with openSUSE and zorin.
View 7 Replies
View Related
Mar 3, 2011
I've used Mint a couple times to try to recover my old computers, but I only worked with it as long as I needed to. Now, I'm going to give Ubuntu a try so I downloaded Ubuntu 10.10 x64 and burned it to a DVD. When I try to boot it up with the DVD in, it does the startup screen that I'm used to before it loads the actual OS, and then it just gives me a blank screen. The only way to exit is to shut down the computer
View 1 Replies
View Related
May 14, 2010
i have installed ubuntu 10.4 on my compaq 615 system successfully but when i restart the system it freezes, jus giving me a blank screen... i already have windows 7 home premium on the system then i partitioned sum space for the ubuntu but it still dosent work...
View 4 Replies
View Related
Mar 17, 2011
My laptop screen goes blank right after the bios is loaded. Live CDs have no effect either.I installed arch linux to my whole HDD today. Last time I installed ubuntu linux to my whole HDD, the same problem happened.The way I fixed the problem last time was by formatting the HDD with an internal HDD dock and then installing windows with linux dual boot.As I do not want to go through the hassle by installing windows again, and I would be very delighted if anyone had an alternate way. I really want my laptop to be windows free!It seems to me that my laptop is somehow constructed to crash / go blank if no windows partition / boot loader is detected. I have no idea why they would do that, maybe you have a better explanation?
View 9 Replies
View Related
Jul 8, 2011
I would like to get better 3D performance, so I decided to try the proprietary ATI driver. The Arch Wiki page about it (https://wiki.archlinux.org/index.php/Catalyst) isn't very helpful, I don't really understand it. It mentions different packages and something about some kernel modules, with no explanation at all about what they do and very poor instructions on how to use them.
I just tried installing "catalyst-daemon" from the AUR, but it just gives me a blank screen when I start X. Nothing happens when I try to use Ctrl+Alt+F2, and nothing happens when I try to blindly log in and enter "shutdown -r now" (I ended up pressing the Reset button). I uninstalled it (everything still worked fine as long as you don't start X), and now everything's back to normal.
View 14 Replies
View Related
Feb 4, 2010
I am trying to install Ubuntu Netbook on an iiView A2. I realize this is not necessarily supported according to the Ubuntu documentation, however, one of my friends who has the same netbook was able to accomplish this with no issues. The computer boots up from the USB just fine, I get to the menu and choose install Ubuntu. I see a cursor flash on the screen for a second and then the Ubuntu logo. Immediately after seeing the Ubuntu logo the screen goes black (or blank) and I get no HDD activity (or any other activity). I have let it set for quite some time but it does not appear to be doing anything. This same kind of thing happens when I choose Try Ubuntu without installing from the initial menu after boot.how to install from the command line and edit xorg.conf later?
View 2 Replies
View Related
Jan 20, 2011
I have installed fedora 10 successfully but when reboot the system after installation not initrd or vmlinuz load and display first blue screen and some processing show after this blank screen display and held the system please tell me what should I do? I have reinstall many times but the problem is same.
View 3 Replies
View Related
Jun 6, 2011
I'm relatively new at Linux, and I am trying to get Nagios to work correctly. I'm running CentOS if that matters. I think I followed the directions here correctly, but all I get is a blank white screen after I login. The documentation page works fine, but I don't see anything on the main http://localhost/nagios page. I have looked at other solutions to this problem (adding the correct path to the open_basedir in /etc/php.ini) and that still did nothing. Any Way to decode my httpd logs... Any time I refresh, I get these four errors from /var/log/httpd/error_log:
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Warning: require_once(/usr/local/nagios/share/includes/../config.inc.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
[Mon Jun 06 09:56:15 2011] [error] [client 127.0.0.1] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required '/usr/local/nagios/share/includes/../config.inc.php' (include_path='.:/usr/share/pear:/usr/share/php') in /usr/local/nagios/share/includes/utils.inc.php on line 4, referer: http://localhost/nagios/
View 2 Replies
View Related
Jul 1, 2011
I installed rhel 5.0 on my hcl laptop, all steps completed successfully, but after booting it goes blank nothing happens, I also have a windows xp installed in c:
View 5 Replies
View Related
Jul 1, 2010
So I downloaded ubuntu netbook edition 10.04 to put on my Asus Pro50G laptop, had heaps of issues installing from a usb so I just used the wubi installer instead and that worked fine, my laptop now dual boots with both windows vista and ubuntu however when I open ubuntu all i get is the purple loading screen, then the initial back group and a space were i believe a dialog box should be, but instead its just a white space, I have left it overnight to load or see if it does anything but to no avail.
further details(from system option in control panel)
vista home premium 2007 sp 2
Asus notebook F5GL series
intel pentium dual cpu T34000 @ 2.16GHz 2.17GHz
[Code]....
View 2 Replies
View Related
May 28, 2010
i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,and after logging off i confront with a blank screen,so i remove akomd-nvidia [yum remove akomd-nvidia] and also yum erase xorg-x11-drv-nouveau [yum erase xorg-x11-drv-nouveau]but still no gui,i think i should install:
yum install kmod-nvidia
xorg-x11-drv-nvidia-libs.i686
xorg-x11-drv-nvidia-libs.x86_64 [but i didn't]
so how can i have my gui back?
View 5 Replies
View Related
Feb 8, 2011
I'm running RHEL 5 on a dell server. Recently, after some updates were installed, the server hangs when trying to start the gui (its set to run level 5)to get into the login screen. I can boot into run level 3 but get the same issue when I startx. CTRL-ALT-BackSpace doesn't return me to the command prompt. I get a blank screen with two letters and a blinking cursor. Which direction or log files to look at to start the troubleshooting.
View 2 Replies
View Related
Sep 26, 2010
I want to change the Boot sequence in Ubuntu 10.04.
In the past I have used
Quote:
But with 10.04 this returns a blank screen. I assume something has changed.
View 3 Replies
View Related
Mar 19, 2010
I had xp sp3 installed on my system celeron 2.0 ghz.and two hard disks.I had installed succesfully ubuntu on other disk. after restart I can see dual boot menu. one xp professionl and other ubuntu. I clicked on the ubuntu but after logging only a cursur blinks on a blank screen. I can see the choice menu "normal","verbose" etc but when I started in normal mode, a blank screen appears and a cursor blinks.
View 13 Replies
View Related
Apr 25, 2011
I got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
View 1 Replies
View Related
Jan 8, 2011
I just put on my Linux PC now and after booting logging into the user a/c, it just gives a blank screen with the desktop wallpaper - no menu's or anything, so there's pretty much nothing I can do. I know I had removed the menu and replaced it with the dock (awn dock or something).
However, I can log in as root and root works fine (so I'm doing the update at the moment).
Coming back to my question, I used to know an Ubuntu command which I put in as sudo (terminal)and it used to work like a magic command which would literally restore and repair my linux installation - I even used it when I bought a new system and transferred my linux hard drive from my previous machine to the new one and this one command actually setup and prepared my linux installation to work smoothly in my new PC - just one command after connecting my h/drive in the new PC.
View 4 Replies
View Related
Sep 24, 2010
I'm trying to run a shell script on a kern board (av1100) that shows some text output on the attached screen. The big problem is that the screen goes to blank in like 2 minutes.I'd just like to have the script showing it's output while the thing is on.Isn't there a command to stop the screen from going to blank?p.s. there is no bash available, just #!/bin/sh
Code:
#!/bin/sh
###########################################################
[code]....
View 2 Replies
View Related
Jun 3, 2010
I am trying to put FC12 on a new Dell E6410 (laptop) with video "00:02.0 VGA compatible controller: Intel Corporation Device 0046 (rev 02)". I used the Live disk and successfully installed, but then I updated. Thereafter when I boot I get a black screen. I cannot even get to the login.
Unfortunately I really do not know where to start to try to trouble shoot. (I can get into run level 3 on the latest kernel). Also the issue seems to come about from kernel 2.6.31.5 to kernel 2.6.32.12 since the blank screen issue does not arise in the former. For now I switched the order of these kernel in GRUB so the older one boots first and this seems to work.
Although the blank screen is my most pressing issue, I am having others too (synaptic mouse, wifi, suspend, internal camera). Well, hopefully once I can run the newest kernel these issue will disappear.
View 8 Replies
View Related
Jan 3, 2011
My screen goes blank for few minutes during booting to print the login page.
When I press ctrl+alt+f1 it shows and hangs at
Enabling /etc/fstab swaps
I show below the output of some commands:
[root@ws-test ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 76G 55G 18G 76% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
/dev/sda3 56G 34G 20G 64% /hdd-1
[Code].....
View 2 Replies
View Related
May 26, 2011
I made my HP DV6000 into a single boot system. Red Hat Enterprise Linux 5, 64bit. I have been trying every cure I can find on the internet. I can seem to find the problem. My monitor show's everything on the screen as it's booting but then, when it's done, it goes blank and no keys/buttons work. I have it on the GNU GRUB screen right now. (The monitor is working fine (on this screen)
View 1 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
