Ubuntu Installation :: 10.04 Bootup / Startup 10.04 The Screen Goes Blank And Says No Signal
Nov 13, 2010
when trying to startup Ubuntu 10.04 the screen goes blank and says no signal. But there are three Ubuntu's to chose from. the middle one will boot-up and works all right. But for when it is starting up the screen flashes and comes back on. the top one doesn't work at all screen goes blank but the lights on tower stay on.
the bottom one starts to boot but when it gets to the screen for your id and pass. it goes all blank but for a white line on the right side of the screen. this is on an old e-machine with a dual boot windows xp home. currently with 1g of ram and a 160gb hard drive split in two. with an AMD processor and ATI graphics on board. cant remember the numbers after that come after Ubuntu on the grub it is listed three times. how do you remove the other. let me know if you need more info.
View 5 Replies
ADVERTISEMENT
Apr 26, 2010
I've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz)
512MB RAM
40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
View 9 Replies
View Related
Mar 11, 2011
I have a clean install of slackware 13.37, downloaded today from slackware64current. On boot, I get a black screen - not just black, but no video signal out of the video card, or at least nothing that the monitor recognizes. Fortunately, I can ssh into the box from another machine. If I do, I can startx and xfce starts up and appears as expected. lspci shows:
01:05.0 VGA compatible controller: ATI Technologies Inc Device 9714
02:00.0 VGA compatible controller: ATI Technologies Inc Device 6898
I have an onboard video chipset with a monitor connected to it, and an ATI 5970 in a pcie slot with a monitor also connected to it. xfce appears on the pcie card (the 5970) as expected, as this is (supposedly) the primary monitor, and the monitor connected to the onboard video output is blank - no signal, also as expected as I have not yet installed the ATI drivers. So the question is - how do I get the terminal output on bootup to appear on one of my monitors? I'm not sure where it is going, and this is out out of my area of expertise.
View 5 Replies
View Related
Jul 4, 2010
I recently got a new laptop (Aspire 5741) and have installed ubuntu 10.4 on it. I have been very happy with the computer and OS. However the only problem I have had is that I am unable to change the screen brightness. Last night I though I found a fix. I cant remember the specific thing but it was something similar to this [URL]. On reboot the ubuntu logo came up and a few seconds later it showed a distorted ubuntu logo. After this it just goes to a black screen. I have tried booting into recovery fail proof graphics mode, and the problem still arises.
View 3 Replies
View Related
Jul 18, 2010
I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.
I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.
View 9 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jan 3, 2010
I've recently installed the 64bit version of WUBI on ASUS K50IJ with windows 7. Everything went smooth however when I try to boot into ubuntu, it shows that all the drivers are loading, I can even see the desktop background image for a second and then the screen goes blank. It is still ON however nothing is showing on it.
Pressing "CTRL+ALT+DEL" reboot the system.
even get access to the console for further debugging?
View 9 Replies
View Related
Aug 31, 2010
i recently was trying to install the ubuntu 10.04 in a machine with a 2x xeon processor but i'm getting some errors.In the installation first (and second, third...) try, the splash screen just freeze.After a lot of tries, just when i actived the acpi=off, noapic and nolapic, i finaly mounted the virtual desktop but after the succesful installation the machine wont boot! Only thing i get is a blank screen with a blinking dot on the left top.? it probaly somenthing related to the things i actived in grub boot, but i'm new to linux and can't find the problem! i can acess the ubuntu via hdd. I edited the boot on grub menu removing the "quite splash" from it and added "nolapic" in there place.Only thing left was the OS are now too slow. He works fine for 5 seconds and completely freeze for 2 seconds, then work for 5 secs again.
View 1 Replies
View Related
Nov 25, 2010
and I've had Ubuntu Linux (10.10) for maybe a month and a half now. Im very satisfied with the whole system, no problems up until an update about maybe 2 weeks ago from today (rough estimate). Anyways, when I start my computer and choose to start Ubuntu, about half of the time it will load with some weird new login screen (because of update), and their are other times where the screen will go blank. I dont think its very safe to cut the power from the computer through the power button :/ I realize there are other posts regarding this, and I apologize if this is against the rules, I just thought maybe it would be appropriate to start a thread with this problem for 10.10 users
View 2 Replies
View Related
Aug 23, 2010
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies
View Related
Jul 1, 2010
So I downloaded ubuntu netbook edition 10.04 to put on my Asus Pro50G laptop, had heaps of issues installing from a usb so I just used the wubi installer instead and that worked fine, my laptop now dual boots with both windows vista and ubuntu however when I open ubuntu all i get is the purple loading screen, then the initial back group and a space were i believe a dialog box should be, but instead its just a white space, I have left it overnight to load or see if it does anything but to no avail.
further details(from system option in control panel)
vista home premium 2007 sp 2
Asus notebook F5GL series
intel pentium dual cpu T34000 @ 2.16GHz 2.17GHz
[Code]....
View 2 Replies
View Related
Jan 25, 2009
I get a blank white screen when i try to bootup fedora and ubuntu to install them. I don't know whats wrong, any ideas?
View 1 Replies
View Related
Mar 21, 2010
I have 9.04 installed. When I boot up i see all the iterations since the 1st install on my boot up screen. How do I delete these? I have to scroll to get to my other OS's.I am running a multiple boot setup.
View 3 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
May 8, 2010
I just downloade and burned it. I booted off of it. It starts to load, but then the screen quits (no signal). Does Ubuntu not support S-Video? Then I tried another computer with a normal monitor connection (blue monitor plug). And it got further than the other computer. But then it hung up eventually too. My burn was successful. Is anyone else having problems with Ubuntu 64 bit edition? (installation)
View 9 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Apr 27, 2010
Pretty much what the title says.. a few more details:
- I installed 10.04 using the alternative install so I've been doing all this in safe mode
- I installed a newer kernel (2.6.33) and still black screen
- I tried to install an updated Intel xorg driver, but I kept getting dependency errors (xorg, x11, something else)
I read another thread on this forum from a user who is using the same platform (Intel HM55), and I got stuck at the last point (can't get Intel xorg driver to install).
View 4 Replies
View Related
Jul 13, 2011
I have just "finished" updating my Ubuntu 9.10. (somehow I knew that something is going to go wrong), and now my PC starts, works fine for a few seconds, then I get a black screen for a moment, and then my monitor starts acting like PC is off.Interestingly I think that otherwise everything is working just fine and that I just can't see anything due to the black screen (monitor is flashing like there is no signal coming from PC).
View 3 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
May 4, 2011
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
View 2 Replies
View Related
Aug 9, 2009
I've just installed CentOS 5.3 on a Shuttle PC with an Atheros AR5001X+ Wireless card, and although the card is properly recognised and correctly identified by the OS, there seems to be a point blank refusal to pick up a signal from my network router, which is a Be*Box branded Thomson 585v7. I've previously successfully managed to get this PC and wi-fi card to pick up the signal from that router under other OSes including Kubuntu, openSUSE, Windows XP Pro and Windows 7 RC, but no luck with CentOS 5.3.
Clicking on Scan for Networks... in KWiFiManager doesn't even bother to scan for a network signal. From the very split second I take my finger of the mouse button, it instantly displays a dialog box which tells me . . . "The scan is complete, but no networks have been found."
How on earth can it actually find a network signal, when it doesn't even bother looking for any?! Wireless access is the only way I can get that machine online. A wired connection is not a realistic option, since the ADSL modem/router is in a front room downstairs, and all my PC's are in a back room upstairs, and would require about 10-20 meters of RJ45 ethernet cable and a lot of unnecessary extra work. The PC I'm currently typing this message on (running W7RC) is picking up the wi-fi signal with no problem.
View 17 Replies
View Related
Oct 4, 2010
I've been running 10.04 (lucid, Kernel Linux 2.6.32-25-generic, GNOME 2.30.2) for about 3 or 4 months and everything has been great, until yesterday.
All of the sudden, bootup has started taking longer than usual and the panel at the top of the screen with "applications", "places", etc. doesn't appear until the machine has been running for at least 2 minutes.
Also- the mouse and keyboard (and my external hard drive), all of which are usb, do not respond until about 2 minutes after startup appears to have finished.
So, basically, here's what happens when I power the machine on:
1. Everything functions quickly, and as normal, until my desktop picture shows and the icons on it appear.
2. Whereas before I would have had mouse and keyboard use (and use of the top panel with applications, places, etc.) at this point, I don't have use of any of these.
3. So I just wait, without keyboard or mouse, etc. for about 2-3 min and all of the sudden the top panel emerges, the mouse and keyboards start working, and then the external hard drive appears.
4. As if this weren't annoying enough, after everything above starts to work, opening applications (e.g. firefox) takes a lot longer than it used to. Basically, starting any application after startup takes a long time the first time it's opened.
I don't understand why this is happening. Before this, startup was super fast, and everything was working great. I dont know how to check into recently loaded updates, but perhaps something got changed there that is causing the problem.
I haven't changed anything hardware related at all, so I don't imagine the change in performance is due to anything on that front, but I could be wrong.
View 7 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Jul 19, 2010
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
View 4 Replies
View Related
Feb 1, 2010
I'm installing Koala here on a 250gb Sata drive. I am looking to dual boot with Win7. I've got a 80gb Win7 partition and the rest is unallocated so I can install Ubuntu on to it. If I try to install, I get to the manual partition screen and it's blank. From what I can tell, Ubuntu isn't recognizing my hard drive at all. When I boot into the liveCD and run gparted, it says no devices found. Also when I boot gparted from a cd I get the same thing. BIOS sees the drive fine and the drive boots into Windows fine.
When I run "sudo fdisk -l" I get nothing. I've tried several of the flags including all-generic-ide. Also tried removing dmraid.
View 9 Replies
View Related
Feb 27, 2010
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
View 9 Replies
View Related
Mar 7, 2010
Ok well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
View 1 Replies
View Related
Mar 10, 2010
I've found similar posts to this but none seemed to be solved. I'm trying to install ubuntu 9.10 on my new laptop. Dual boot Win 7 Pro on first partition.Its a gateway nv79 laptop with an intel i3 330M processor.The problem occurs when I boot from the CD I get the first menu where you can choose to install, load ubuntu from CD, etc. No matter which option I choose, I get nothing but a blank screen. Then I can do nothing but power down by holding the power button.I've tried both 64 and 32 bit versions, same thing. The 32 bit disk works fine on another computer. I've also tried booting another version of Linux, Helix, from CD and that also works fine. I'm thinking ubuntu doesnt support my graphics card: Intel Graphics Media Accelerator HD
View 1 Replies
View Related
Mar 16, 2010
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
View 1 Replies
View Related
Apr 25, 2010
I did a fresh install of 8.04 alternate disk with LVM then updraded to 10.04 (due to lack of any spare CDs around).
Everything was working fine but wanted to try to get the nvidia-173 drivers installed (I have an old FX5200). Can't start into X now as my plasma says mode unsupported.
At one point I managed to boot into recovery mode then root terminal and removed all nvidia packages and reinstalled nvidia-173 only and followed the instructions listed on the 10.04 release candidate page. Still stuck with the unsupported modes error on my TV though. I have a 720p plasma display (1366x76, I usually run 1280x768 without issues. I'm guessing it is the refresh rate set in the new xorg.conf that is throwing me off, how to adjust this?
An issue that's complicating things however is that when I try to boot into recovery mode I get an error stating 'pcspkr' driver already registered, aborting... then it hangs there until I ctrl-alt-delete and force a restart. This is preventing me from getting to the point where I can select a a root terminal to try to fix my errors.
I have used 8.04 exclusively for a few years and wanted to try something new (still not all that adept at linux setup).
EDIT: I managed to get to root again and just removed the xorg.conf file and that seems to work somewhat. Except now I can't boot as I get a looping mountall: Plymouth command failed that hangs up the process.
View 1 Replies
View Related
