I made my HP DV6000 into a single boot system. Red Hat Enterprise Linux 5, 64bit. I have been trying every cure I can find on the internet. I can seem to find the problem. My monitor show's everything on the screen as it's booting but then, when it's done, it goes blank and no keys/buttons work. I have it on the GNU GRUB screen right now. (The monitor is working fine (on this screen)
View 1 RepliesI have recently got a new computer, and I have been trying to install openSUSE 10.3 on it. But, the screen will go blank and become unresponsive if I boot with the default options. When I switch to text mode, it boot and stops when it outputs time: pit clocksource has been installed. Switching to safe settings will make no difference. Right now, I am using openSUSE 11.1, but I'm not very happy with it, so I intend to replace it with 10.3. I'm not sure what the pit clocksource is, and can it be disabled, or some workaround?
my specs are:
AMD Athlon 64
PCIe NVIDIA 7100 GS
NVIDIA MCP61P northbridge chipset
I want to change the Boot sequence in Ubuntu 10.04.
In the past I have used
Quote:
But with 10.04 this returns a blank screen. I assume something has changed.
I got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedJust upgraded from Karmic to Lucid.. Everything was running smoothly except compositing so I enabled the Open Source Edge repos and downloaded the latest driver my card (a ati radeon x1650). I rebooted to a bios splash and then nothing.. blank screen. After about 4 seconds of nothing the monitor flicks on showing the kubuntu bootsplash for a split second then blank again.ctrl + alt + f$ isn't displaying a tty for meI'm not getting the usual grub menu on startup (esc isnt bringing it up)(it's a usb keyboard enabled in the bios)
View 3 Replies View RelatedI have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.
I have this machine (motherboard ITX Jetaway NF94-270-LF based on CPU Atom N270, full specs here) as a server for some time now (about 4 years). Debian 8.1 is installed on it.
Two days ago, after a power failure, the machine was not able to complete the boot process. I attached a keyboard and a monitor (on VGA port, the motherboard also as a DVI one, but I don't have a suitable monitor) to be able to see what's happening and interact with the machine. Unluckily, at a certain point during the booting sequence the screen goes blank and the monitor goes in standby mode; apart from that, the boot process continues in the background.
As far as I can recall, this behaviour existed for at least a couple of years (if not from the beginning) and the boot process was always completed successfully until two days ago.
The screen goes blank after the setup of the keyboard mapping. I tried everything to avoid the screen going blank: in the Grub menu I set the "vga" parameter, the "nomodeset" parameter, the grub_gfxmode parameter, I removed the "quiet" option, I removed the "load_video" line, I forced the BIOS to only use the VGA port for the video and so on, in order to disable or configure differently the video and the framebuffer. All these stuff had no effect at all: the screen keeps going blank at the same point during the boot process.
The only way I was able to use a fully booted system through keyboard and monitor was via the rescue mode of the Debian 8.1 netinst image. But that way, of course, I wasn't able to observe the normal boot process. So, I checked the boot parameters of the rescue mode and I found that the only usefull parameter was "vga", which I already used and was ineffective.
I have some problem with Debian 7. Just installed Debian 7 wheezy.
Motherboard Intel D2500CC, graphics - Intel GMA 3600. Monitor (BenQ V2200 Eco) connected via VGA cable. No X server installed.
After GRUB boot as soon as modesetting kicks in, the monitor loses the signal and goes black. Keyboard does appear to be active, as Ctl-Alt-Del will cause a reboot.
I tried nomodeset, vga=791, 771 etc kernel parameters, but this won't work.
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies View RelatedLast night I upgraded from 9.04 to 9.10 in search of faster internet (which I got by the way), but now whenever I try to boot it goes to a blank screen for about 10 minutes befor going to the desktop. Its completely blank and has no cursor or anything. It's a huge problem and I could really use some help. 9.04 never did this.
View 9 Replies View RelatedI have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
View 3 Replies View RelatedI have a HP EliteBook 2730p. lspci reports this for my graphic card:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30eb
Flags: bus master, fast devsel, latency 0, IRQ 30
[Code]....
I updated from Lucid to Maverick. When I boot with the new 2.6.35-22 kernel the screen stays blank after grub. When I boot the old 2.6.32-25 Kernel everything works fine. I tried to boot 2.6.35-22 in Recovery Mode. When I do this I see some kernel messages in text mode and then the screen goes blank again.
I upgraded 10.10 from 10.04 from the update button from within the update manager. It seemed to upgrade ok but after I shut down and turned it back on it goes to a blank screen. If I then hold the power button to turn it off and back on it then loads to a boot screen where about 6 options with recovery option are listed. The top 2 options do not work as they just go to a blank screen but the bottom 2 give me some other choice including seeming to boot up to a normal Ubuntu environment. How can I fix it so that it boots to a normal Ubuntu 10.10.
View 8 Replies View RelatedI have always had Ubuntu installed along with Win 7 but rarely use it, i only use it if i am flashing firmware to my phone or something similar.
I uninstalled my older version of Ubuntu because it was becoming sluggish and have tried to install the 10.10 version a few times today, but every time i boot into Ubuntu, i get a blank purple screen and nothing else.
My mouse curser is the only thing that is working but there is nothing to click on and nothing shows if i right click.
I have a toshiba satelite pro laptop (can't think of the exact model at the moment) with 4gb ram + 320gb hard drive. i have been dual booting ubuntu for roughly a year, and throughout all that time windows has become less and less used, therefore last night i took the plunge, and went about installing ubuntu(10.10) as my main operating system and removing windows, i did this via a usb, using Unetbootin.
I used one of the .ISO's from the official ubuntu site, and went through the installation processall went well, no errors within the installation process, hard drives were partitioned fine etc, however when i've come to turn my computer on for the first time this morning i get a black screen with a blinking underscore straight after the toshiba logo flashes up and i get the choice to go to bios options.
If i do go to bios options my hard drive is listed fine, and if i try to boot from my usb again, it doesnt work, and attempts to verify dhcp and eventually tells me it couldnt find a boot file, my laptop however is plugged in via an ethernet cable. it doesnt work with or without the ethernet cable. i have tried leaving it for about half an hour and nothing has changed, i also can't boot to GRUB.
I just finished installing 10.4 on my Dell Latitude X300, and it will only run in low-graphics mode. I will try to boot like normal, but then a blank screen. I have to boot in Recovery Mode and use the Failsafe graphics option.
View 4 Replies View Related so I had a black screen when I was starting up my PC instead of the normal Ubuntu with the dots underneath. I have Ubuntu 11.04 on a dual-boot with Windows Vista. It would still boot normally and work fine but I wanted it with the Ubuntu and dots etc.
After looking at many sites to try and fix it that didn't work I found this: [URL]. That didn't work so I found this next: [URL]
I did what it said by removing
Code:
vt.handoff=7
Then when rebooted I got the Ubuntu with the purple background and dots but the boot would hang (always when all 5 dots were orange). I booted into recovery mode and I chose "File System Check" on reboot and it would get to the bit with 5 orange dots then it would check disk for errors and go to login screen then work fine.
If I added vt.handoff=7 it would boot normally with a black screen again.
RESULTS.txt is from when I had vt.handoff=7 removed and I was in Recovery mode>resume normal boot>"sudo bash ~/Desktop/boot_info_script.sh".
RESULTS1.txt is from when I booted up with the disk check and was in Terminal.
EDIT: Also just recently I'm getting a lot of boot hangs, freezes (where everything on screen will freeze and if I was playing music in Banshee it repeats the last 3 seconds until I hold down button on PC), and it will sometimes just restart randomly. Not sure if that related or not...
How to avoid/resolve this problem. after i input user/password the VNC screen will just have a cursor
View 1 Replies View RelatedI have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
I'm trying to make dual boot system with Lenny (64bit) along with WinXP. I'm using one HDD with 2 partitions and installed first XP then Lenny. Everything seems fine till the first boot after fresh install. Lenny starts to boot and after same point the screen goes blank and then is turned off and that's it...nothing happens. Happens so fast that I'm unable to see the exact messages on the screen. Maybe somewhere around staring anarcon?
PC is:
Athlon64 X2 5400+
Asus M2V-MX motherboard
3GB DDR2 800
500GB WD SATA2 HDD
Radeon x800 GTO video
I reinstalled 2 times and it's the same. WinXP is working fine though but I really don't want it to be my OS...
Another "hint" from today: The same happens when I use "Try without installing" of Ubuntu 10.04(i386) Live CD. It starts loading and at some point turns off the monitor.
Tried also with 8.04(64bit): Boots till it reach something like "Settings sensor limits" and then it's stuck. I have consoles though (Ctrl+Alt+F1/2/3...).
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies View RelatedSince 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 Replies View RelatedI have got myself into a situation where I see nothing during boot until X starts, and I have no text virtual consoles. I recently replaced my old 9.10 system running on hardware that seemed to be breaking down, with a new system with both an onboard graphics chip (which I disabled in the BIOS as the 1st step), and an Nvidia GeForce 8400 GS card. I installed Windows XP then Ubuntu 9.10, copied all my files across, modified /etc/fstab, /etc/hosts, etc etc., and as the last step I unplugged the 1920x1440 IBM CRT that I'd used during the install and tweaking, and plugged the display into the BenQ LCD on a Belkin 4-port KVM. Oh, I also installed Windows and Splashtop (that mini-Linux that fast boots from the Windows NTFS partition).
I had a problem at that point: I had a lot of trouble getting any signal on the LCD monitor, and eventually got it working but with the whole display half-shifted off the screen (everything was shifted to the right about six inches), and the Ubuntu splash during boot (the sort of spotlight effect with the glowing horizontal line with the light animating along it left and right) was shrunk and only occupied part of the screen. Nor could X detect what kind of monitor it was. I had a lot of problem with a lot of attempts prodding the LCD monitor to complain "Out of range!" (over the top of the Ubuntu three linked circles). I couldn't fix the problem, and in the end installed the Nvidia proprietary driver and ran its X configurator, and suddenly everything snapped back and began working correctly: X ran happily in 1680x1050, filling the screen properly, and X could now correctly detect the monitor as a BenQ.....