Ubuntu Installation :: Blank Box On Startup?
Jul 1, 2010
So I downloaded ubuntu netbook edition 10.04 to put on my Asus Pro50G laptop, had heaps of issues installing from a usb so I just used the wubi installer instead and that worked fine, my laptop now dual boots with both windows vista and ubuntu however when I open ubuntu all i get is the purple loading screen, then the initial back group and a space were i believe a dialog box should be, but instead its just a white space, I have left it overnight to load or see if it does anything but to no avail.
further details(from system option in control panel)
vista home premium 2007 sp 2
Asus notebook F5GL series
intel pentium dual cpu T34000 @ 2.16GHz 2.17GHz
[Code]....
View 2 Replies
ADVERTISEMENT
Apr 26, 2010
I've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz)
512MB RAM
40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
View 9 Replies
View Related
Nov 13, 2010
when trying to startup Ubuntu 10.04 the screen goes blank and says no signal. But there are three Ubuntu's to chose from. the middle one will boot-up and works all right. But for when it is starting up the screen flashes and comes back on. the top one doesn't work at all screen goes blank but the lights on tower stay on.
the bottom one starts to boot but when it gets to the screen for your id and pass. it goes all blank but for a white line on the right side of the screen. this is on an old e-machine with a dual boot windows xp home. currently with 1g of ram and a 160gb hard drive split in two. with an AMD processor and ATI graphics on board. cant remember the numbers after that come after Ubuntu on the grub it is listed three times. how do you remove the other. let me know if you need more info.
View 5 Replies
View Related
Jan 3, 2010
I've recently installed the 64bit version of WUBI on ASUS K50IJ with windows 7. Everything went smooth however when I try to boot into ubuntu, it shows that all the drivers are loading, I can even see the desktop background image for a second and then the screen goes blank. It is still ON however nothing is showing on it.
Pressing "CTRL+ALT+DEL" reboot the system.
even get access to the console for further debugging?
View 9 Replies
View Related
Aug 31, 2010
i recently was trying to install the ubuntu 10.04 in a machine with a 2x xeon processor but i'm getting some errors.In the installation first (and second, third...) try, the splash screen just freeze.After a lot of tries, just when i actived the acpi=off, noapic and nolapic, i finaly mounted the virtual desktop but after the succesful installation the machine wont boot! Only thing i get is a blank screen with a blinking dot on the left top.? it probaly somenthing related to the things i actived in grub boot, but i'm new to linux and can't find the problem! i can acess the ubuntu via hdd. I edited the boot on grub menu removing the "quite splash" from it and added "nolapic" in there place.Only thing left was the OS are now too slow. He works fine for 5 seconds and completely freeze for 2 seconds, then work for 5 secs again.
View 1 Replies
View Related
Nov 25, 2010
and I've had Ubuntu Linux (10.10) for maybe a month and a half now. Im very satisfied with the whole system, no problems up until an update about maybe 2 weeks ago from today (rough estimate). Anyways, when I start my computer and choose to start Ubuntu, about half of the time it will load with some weird new login screen (because of update), and their are other times where the screen will go blank. I dont think its very safe to cut the power from the computer through the power button :/ I realize there are other posts regarding this, and I apologize if this is against the rules, I just thought maybe it would be appropriate to start a thread with this problem for 10.10 users
View 2 Replies
View Related
Aug 23, 2010
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
May 24, 2010
Every tutorial I've seen on installing a dual boot environment assumes you already have an installed OS (usually Windows). My wife's XP system is pretty hosed, and she's been interested in Ubuntu. Because she's ripe for an XP re-install anyway, I'm planning on backing up her data, completely wiping her hard drive, and installing a dual-boot Windows-XP/Ubuntu environment. Any good step-by-steps for this, with good hints on how to partition, etc.?
If not, my plan B is to reformat and install a basic XP system, and then follow one of the tutorials for going dual-boot over an existing install. Does that make sense? I should mention, I've used Linux for years as a user on my ISP, but have only been using Linux on a home system for a couple months; so I'm fairly new to the install and administer side.
View 7 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
May 28, 2010
I just recently installed 10.04 and the desktop look is nice, but all my applications, folders, games, firefox, etc... is missing. The only way for me to access anything basic is to browse through the fony folder I created just to try and find everything. getting at least my Firefox browser and some other basic applications. Oh and I noticed I don't have root access anymore either. I am the only one using the computer, but can't do a thing. I am running Ubuntu 10.04 on my Acer Aspire One Netbook. So I have no HDD.
View 4 Replies
View Related
Jul 19, 2010
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
Things I tried in grub:
add 'xforcevesa'
add 'xforcevesa' & remove 'quiet splash'
add 'nomodeset' & remove 'quiet splash'
add 'nomodeset xforcevesa' & remove 'quiet splash'
[Code]...
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
View 4 Replies
View Related
May 2, 2011
Just upgraded to 11.04 and now I frequently get windows with nothing in them. Happens randomly when I launch a new app, or switch between apps, or maximize the window for an app. Is this a known bug?
View 9 Replies
View Related
Mar 29, 2011
So I tried installing ubuntu on a blank partition on my mac. Everything went well, but then it said it was going to reboot. On startup, it went straight to a white screen. I tried holding down the alt button but I got no luck.
View 3 Replies
View Related
Feb 1, 2010
I'm installing Koala here on a 250gb Sata drive. I am looking to dual boot with Win7. I've got a 80gb Win7 partition and the rest is unallocated so I can install Ubuntu on to it. If I try to install, I get to the manual partition screen and it's blank. From what I can tell, Ubuntu isn't recognizing my hard drive at all. When I boot into the liveCD and run gparted, it says no devices found. Also when I boot gparted from a cd I get the same thing. BIOS sees the drive fine and the drive boots into Windows fine.
When I run "sudo fdisk -l" I get nothing. I've tried several of the flags including all-generic-ide. Also tried removing dmraid.
View 9 Replies
View Related
Feb 27, 2010
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work.
I'll list my laptops specs just in case my problem has anything to do with them:
MSi
Windows 7 Home Premium 32 bit
Intel Core i3 M 330 2.13GHz
4GB DDR3 RAM
Intel Graphics Media Accelerator HD
View 9 Replies
View Related
Mar 7, 2010
Ok well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
View 1 Replies
View Related
Mar 10, 2010
I've found similar posts to this but none seemed to be solved. I'm trying to install ubuntu 9.10 on my new laptop. Dual boot Win 7 Pro on first partition.Its a gateway nv79 laptop with an intel i3 330M processor.The problem occurs when I boot from the CD I get the first menu where you can choose to install, load ubuntu from CD, etc. No matter which option I choose, I get nothing but a blank screen. Then I can do nothing but power down by holding the power button.I've tried both 64 and 32 bit versions, same thing. The 32 bit disk works fine on another computer. I've also tried booting another version of Linux, Helix, from CD and that also works fine. I'm thinking ubuntu doesnt support my graphics card: Intel Graphics Media Accelerator HD
View 1 Replies
View Related
Mar 16, 2010
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
View 1 Replies
View Related
Apr 25, 2010
I did a fresh install of 8.04 alternate disk with LVM then updraded to 10.04 (due to lack of any spare CDs around).
Everything was working fine but wanted to try to get the nvidia-173 drivers installed (I have an old FX5200). Can't start into X now as my plasma says mode unsupported.
At one point I managed to boot into recovery mode then root terminal and removed all nvidia packages and reinstalled nvidia-173 only and followed the instructions listed on the 10.04 release candidate page. Still stuck with the unsupported modes error on my TV though. I have a 720p plasma display (1366x76, I usually run 1280x768 without issues. I'm guessing it is the refresh rate set in the new xorg.conf that is throwing me off, how to adjust this?
An issue that's complicating things however is that when I try to boot into recovery mode I get an error stating 'pcspkr' driver already registered, aborting... then it hangs there until I ctrl-alt-delete and force a restart. This is preventing me from getting to the point where I can select a a root terminal to try to fix my errors.
I have used 8.04 exclusively for a few years and wanted to try something new (still not all that adept at linux setup).
EDIT: I managed to get to root again and just removed the xorg.conf file and that seems to work somewhat. Except now I can't boot as I get a looping mountall: Plymouth command failed that hangs up the process.
View 1 Replies
View Related
Apr 26, 2010
I just bought a new desktop. I want to set it up as a dual boot windows/ubuntu. I installed my copy of XP on it with no problems. When I ran the Ubuntu 9.10 amd64 installer, the drive partitioner keeps coming up blank. There is no drive map, and all of the controls are faded out. I tried it with just windows on the hard drive first. Then I used GParted to reduce the size of the windows partition and make the rest into an ext4 file system. Same result. I had no problems with this on my Vista/Ubuntu laptop. If anyone has any idea what I'm doing wrong
View 1 Replies
View Related
May 1, 2010
I'm having problems installing 10.04 on a IBM Thinkpad R51. It boots fine, loads the graphics... saying "UBUNTU", and below are some dots red/white moving... then it all goes BLANK... silent.. nothing happens (probably waiting for user imput?)
I've tried getting out of "normal" install by hitting ESC key, and selecting noapic and noa..p..l something?
No improvements.
View 6 Replies
View Related
May 12, 2010
So I tried to install ubuntu 10.04 on my 5 year old gateway laptop but the screen kept going blank when ubuntu was booting up. I was able to get to the menu screen and add "i915.modeset=1" after "quiet splash", which allowed ubuntu to load. I installed it on the hard drive successfully, but when I restarted the computer, it won't load again. I don't know how to fix this so I can run it from the hard drive.
View 3 Replies
View Related
Jun 30, 2010
I'm attempting to install Ubuntu Netbook remix (however I have tried others) on a 32 bit laptop but after it goes through that ubuntu loading thing, it goes blank after that and I've determined that it's not the cd and it's something to do with the hardware after looking at other posts with similar issues. I do not have an operating system on this laptop.
View 3 Replies
View Related
Jul 7, 2010
I've searched the forums and all the problems seem to be getting a blank screen after the first menu or first splash screen.My problem is that I'm getting a blank screen straight away without seeing anything. As soon as the system says that it's booting from CD the screen goes blank and nothing happens.I've done the md5sum on the disc successfully (and the iso). It's an old system (P4) and I'm using the integrated graphics.I've tried Ubuntu Server 10.04, UNE 10.04 and Ubuntu 9.04, all have the same problem.
View 1 Replies
View Related
Aug 5, 2010
I have an HP computer nvidia and AMD stickers on it and 1GB RAM. HDD is Parallel ATA. I downloaded both Ubuntu & Kubuntu Live CD. Both live CD's boot to a blank screen. After a (seemingly) successful install of kubuntu, the screen goes blank after GRUB.
Here are the details: With this HP, when i boot from ubuntu live CD the screen goes blank. It does not give any option about trying ubuntu, install, ubuntu, mem test. I just get a blank screen. On my ASUS laptop the ubuntu live CD goes straight into ubuntu live (without having to choose an option). It is not the CD When I boot from kubuntu live cd i get to the screen where i have an option to try kubuntu, install kubunt, memtest..
If I choose either try or install, my screen just goes blank & never progresses. Again, this live CD works on my ASUS laptop. At the bottom of the boot screen for the kubuntu live CD i noticed f1-f6 configurations. I was unable to change any other than language and f6 options. If I press f6 i get options which i can mark with an x. I don't know what any of these mean but I checked all of them and then on the boot menu popped up
BOOT **a whole bunch of text** I went onto install kubuntu and it no longer went to a blank screen. Rather it was a fuzzy grainy splash with the word KUBUNTU and loading dots underneath. Atlas it seemed to prevail, the installation process started (fuzziness went away). The installation screen now looks just as it did on my ASUS laptop. I continued through the steps with an installing on the entire HDD. The installation completed (with no signs of error). Screen said take out disc press enter.
I did so and my computer turned off. I power up the computer and the GRUB loads up. I have option of regular and fail safe. Both lead up to a blank screen. My monitor seems to think there is no signal and goes into standby mode. Perhaps the video card is not rendering correctly or not compatible.
View 2 Replies
View Related
Sep 27, 2010
ive tried to update my test-laptop (thinkpad t43) to the actual beta. the dist-upgrade worked whitout problems, but after rebooting the x-server seems to work, but screen is empty...it seems that the xserver is crashing:
Quote:
Caught signal 11 (Segmentation fault). Server aborting
here the full log:
Quote:
[ 181.280]
X.Org X Server 1.9.0
[Code]...
View 5 Replies
View Related
Oct 16, 2010
I have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
View 3 Replies
View Related
Oct 24, 2010
I'm installing Ubuntu 10.10 64bit (and ive tried 32bit) on a brand new Sony Vaio as a dual boot on Windows 7.
All goes well and I eventually get to the desktop on Ubuntu but the screen isnt right. Its not so much the resolution as its perfect in clarity but its the physical borders right and bottom are out of screen. Move the mouse to the right and bottom and the mouse disappears. I cant see the bottom bar at all. But like I said, the res clarity is perfect. I've tried playing with the res but it wont change the border issue.
Soon enough, on the top right, I get a hardware driver update alert for a Nvidia and asks me to activate. I do this with the hope to fix my screen size issue. Once activated, I restart and thats it, I get a blank screen.
This is what ive tried:
In recovery mode, i can get in with low-graphics.
Uninstalled the Ubuntu recommended Nvidia driver and all is ok.
Tried downloaded the correct Nvidia driver for my laptop but exact same.
In low graphics mode, when I launch Nvidia X Server, I get this error: 'You do not appear to be using the Nvidia X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart X server.'
View 2 Replies
View Related
