Basically i install Ubuntu using a boot CD and it install 100% but after i restart my desktop the screen just goes blank, i can run it of a live CD.The same thing happens with openSUSE and zorin.
View 7 RepliesI am trying to install Ubuntu Netbook on an iiView A2. I realize this is not necessarily supported according to the Ubuntu documentation, however, one of my friends who has the same netbook was able to accomplish this with no issues. The computer boots up from the USB just fine, I get to the menu and choose install Ubuntu. I see a cursor flash on the screen for a second and then the Ubuntu logo. Immediately after seeing the Ubuntu logo the screen goes black (or blank) and I get no HDD activity (or any other activity). I have let it set for quite some time but it does not appear to be doing anything. This same kind of thing happens when I choose Try Ubuntu without installing from the initial menu after boot.how to install from the command line and edit xorg.conf later?
View 2 Replies View RelatedI have installed fedora 10 successfully but when reboot the system after installation not initrd or vmlinuz load and display first blue screen and some processing show after this blank screen display and held the system please tell me what should I do? I have reinstall many times but the problem is same.
View 3 Replies View RelatedI am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies View RelatedI recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
i had a serious problemafter i checked my hardware detected by using liveCD, there's no problem i thoughti successfully installed it on my PCbuti got blank/no screen appeared when it started up
View 1 Replies View RelatedSo I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies View RelatedAfter struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg
[code]...
i installed, few days before susu 11.2 . now my lcd only has resolution of 800x600, so i type "sax2". after he made that config, suse displayed me a gui, where i can change resolution and my frequency. i selectet native resolution and freq. (the right nvidia driver and lcd was detectet) and hit that apply button, then i needs to restart. done it, but then i got after that loading bar of suse only blank screen. so what was wrong ? and what i can do now to fix ?
View 2 Replies View RelatedI have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.
I have tried:
- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies View RelatedI just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.
Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!
[Code]...
After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.
View 3 Replies View RelatedOk well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
View 1 Replies View RelatedI've found similar posts to this but none seemed to be solved. I'm trying to install ubuntu 9.10 on my new laptop. Dual boot Win 7 Pro on first partition.Its a gateway nv79 laptop with an intel i3 330M processor.The problem occurs when I boot from the CD I get the first menu where you can choose to install, load ubuntu from CD, etc. No matter which option I choose, I get nothing but a blank screen. Then I can do nothing but power down by holding the power button.I've tried both 64 and 32 bit versions, same thing. The 32 bit disk works fine on another computer. I've also tried booting another version of Linux, Helix, from CD and that also works fine. I'm thinking ubuntu doesnt support my graphics card: Intel Graphics Media Accelerator HD
View 1 Replies View RelatedI've searched the forums and all the problems seem to be getting a blank screen after the first menu or first splash screen.My problem is that I'm getting a blank screen straight away without seeing anything. As soon as the system says that it's booting from CD the screen goes blank and nothing happens.I've done the md5sum on the disc successfully (and the iso). It's an old system (P4) and I'm using the integrated graphics.I've tried Ubuntu Server 10.04, UNE 10.04 and Ubuntu 9.04, all have the same problem.
View 1 Replies View RelatedI'm installing Ubuntu 10.10 64bit (and ive tried 32bit) on a brand new Sony Vaio as a dual boot on Windows 7.
All goes well and I eventually get to the desktop on Ubuntu but the screen isnt right. Its not so much the resolution as its perfect in clarity but its the physical borders right and bottom are out of screen. Move the mouse to the right and bottom and the mouse disappears. I cant see the bottom bar at all. But like I said, the res clarity is perfect. I've tried playing with the res but it wont change the border issue.
Soon enough, on the top right, I get a hardware driver update alert for a Nvidia and asks me to activate. I do this with the hope to fix my screen size issue. Once activated, I restart and thats it, I get a blank screen.
This is what ive tried:
In recovery mode, i can get in with low-graphics.
Uninstalled the Ubuntu recommended Nvidia driver and all is ok.
Tried downloaded the correct Nvidia driver for my laptop but exact same.
In low graphics mode, when I launch Nvidia X Server, I get this error: 'You do not appear to be using the Nvidia X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root), and restart X server.'
After selecting "Install Ubuntu", the screen goes blank and nothing happens. I am using a HP laptop and am trying to install Ubuntu 9.10 from a CD I ordered from ubuntu site.
View 9 Replies View RelatedIt seems I am having the same problem, but on a Toughbook CF-28. I tried searching the forum for a solution, and Google, but to no avail. Here is the run down:Installed Debian 6.0 from the NetInst (i386) CD, and all went well. Re-started the laptop, and all booted up fine (got the code lines). When the login screen should appear, all I get ilackscreen.CF-28 Hardware:RAM: 512MB. CPU: Pentium III Mobile 800 MHz (Im guessing from Google) Searches) Not sure what else it has, no information came with the laptop. I do know it has an ethernet port, which worked durininstall, has no wireless, does have a touch screen.I apologize for my noobness, but I am uber new to Linux. Any ideas on how to resolve this issue?
View 14 Replies View RelatedRunning 2.6.33.3-85.fc13.i686 and just purchased a AGP 7600GT 512 video card. Searched around and found:I did the rpm, yum, sed, mv & dracut as directed. Then I rebooted. When it starts up (all the normal bios messages) and then I 1/2" bar across the bottom of the screen with Fedora 13 on the right end and .... nothing. Just sits there. I've used my Live-13 disk and tried to reverse the procedure but I'm starting to think it's the video drivers.
View 4 Replies View RelatedI am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb
vga=791 [nomodeset]
vga=1 [nomodeset]
xdriver=nv nomodeset
xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
trying to install fedora but after I sellect install or install with basic video, the screen scrolls a bunch of text then goes blank. I'm on a laptop and tried unplugging. The lcd monitor but it still goes blank on the laptop screen. The cd is no longer spinning and the hdd light isn't blinking. What do I do?---------- Post added at 10:44 PM ---------- Previous post was at 10:11 PM ----------Sorry if my description of the problem is confusing, here's a video of what its doing
View 1 Replies View RelatedSince 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.
I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
I have installed a new PC system
- OpenSuSE 11.3, 64bit
- AMD Phenomen II X4
- ASUS M4A88TD-V Evo/USB3
- 3 hard disks
- etc.
After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.
i just installed opensuse 11.4 on my system(gigabyte 7n400pro2,amd athlon xp 2.8ghz,ocz vertex2 ssd,ati radeon x1550) and i have this strange problem: the screen gets blank(for about a second) every 40-50seconds. everything else works fine.
View 5 Replies View RelatedJust installed 11.4. First effort with OpenSuse but have previously used Ubuntu on another machine. Installation went great. After I log in the screen goes blank with just a mouse cursor, everything else is black. Boots okay in recovery mode.
This is a dual boot with Windows XP. Machine boots into windows as expected.
I have opensuse 11.4 installed with both gnome and kde. These are the things I did before the problem:
1. changed the login screen to oxygen login screen
2. Then I logged off and when again logging in, I chose the session as Metacity.
But unfortunately, the the blank splash screen appeared and it didnt get into the desktop. Then I did a hard restart (By pressing the power button). Since then, I cannot login. The login screen is blank left only a active mouse pointer. Even booting into failsafe also didnt work.
By the way, I have chosen the option of directly logging in without password prompt at login. (during installation)
Only a week before i did a clean install since i corrupted the grub, dont wanna install again.