General :: How To Setup Two Ethernet Cards
Sep 6, 2010How to setup two Ethernet cards ,one with public ip address and the other with local ip address.
View 4 Replies
ADVERTISEMENT
General :: Build Broadcom Netlink BCM5787M Onboard Ethernet Cards (x2)
Apr 13, 2010I would like to get my Slackware 11 to work with the Broadcom NetLink BCM5787 onboard Ethernet Cards (x2). I have downloaded the tg3 driver from the Broadcom site. I copied and extracted the driver onto the Linux harddisk. When I wanted to build it I got the message, tg3_compat.h: error : redefinition of 'msecs_to_jiffies'previous delay.h : error: definition 'msecs_to jiffies" was here"
View 3 Replies View RelatedUbuntu :: Ethernet Cards Not Connecting?
Mar 9, 2011i have ubuntu 10.10 64b and for some reason last night the wired network autoeth01 suddenly will not connect to my router. it is a dual boot machine so i booted into windows and it is working fine in that OS.
I then had a look at the status on my laptop running ubuntu 10.10 32b and that was showing the same message "wired network autoeth01 disconnected" i cannot for the life of me figure this out. just before it was disconnected i had been copying 7gigs worth of data using samba from the 32b machine to the 64 bit machine.
i have tried deleting the wired entry and recreating it.
tried different cables
even changed the router
works with all windows machines connected to network
here is what comes up in lfconfig:
jason@ubuntu1:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
[Code].....
Networking :: Won't Find Ethernet Cards
Sep 15, 2010I am writing a new lightweight Linux distibution mainly for educational purposes. I have a problem; it won't find any ethernet cards. I have tried enabling several things in the kernel config. What I would really like to know is how to enable some generic ethernet drivers and therefore networking. I would like to avoid having to use modules. I'm using kernel version 2.6.35.1.
View 9 Replies View RelatedHardware :: Setup A 5 Monitors Setup Using 3 Cards?
Oct 8, 2010I am trying to setup a 5 monitors setup using 3 cards, but I am stuck at 3 monitors for now. The third card is not plugged yet, so the current setup is:
NVIDIA 8800GT (binary driver 195.***)
--->1680x1050 LCD (VGA)
--->1680x1050 LCD (DVI)
ATI HD5450 (3 output, but I think the OSS driver only support 2, corrdct me if I am wrong) (OSS driver)
--->1280x1024 LCD (DVI)
---> 1366x768 TV (VGA)
[Code]...
OpenSUSE Install :: 11.2 Not Recognizing Some Ethernet Cards
Jan 5, 2010I've installed OpenSUSE 11.2 on my computer. Well, 11.2 is great and all, but issuing ifconfig yields only loopback device. Now, I have OpenSUSE 11.0 installed on my notebook; the system works fine, although I had that very problem initially and had to recompile the kernel in order to make it recognize my notebook's ethernet card. My question is: If I upgrade my notebook's 11.0 up to 11.2, am I sure to have my files intact? Is 11.2 sure to "see" the ethernet card?
View 2 Replies View RelatedServer :: Configure Two Ethernet Cards With The Same IP For Redundency?
Jul 20, 2010how to configure two Ethernet Cards with the same IP for Redundency and Load Balancing?
I appriciate if you spare some time on replying by above query.
Slackware :: 2 Ethernet Cards Using The Same Driver As Module?
Oct 11, 2009i have 2 nic's that use the same 8139too module to be operated.so in order to run them i added in /etc/modprobe.d/a file with 2 aliases for the 2 nics alias eth0 8139too alias eth1 8139too and I added a udev rule to give the name eth1 to the 2nd card (the 1st card already had a rule) i still don't get the 2nd rule to be brought up automatically at start up... ifconfig only returns 'eth0' and i have to manually do 'ifconfig eth1 up' at which time the interface is brought up nicely.. then i do a dchpcd to get a network address and im all set. but i would like to do this automatically... note that i know that if i add static ips in /etc/rc.d/rc.inet1.conf i will get both ifs up... but i wonder how its gonna happen with the 2nics being 2 dhcp clients.
View 5 Replies View RelatedDebian :: Local DHCP Server With Two Ethernet Cards
Jul 5, 2015I recently bought a used Server (FSC RX200 S4) and set it up running Debian 7. Being used to Ubuntu, that was no big deal. It works as it should out of the box. This magic computing machine has four Network cards (eth0 - eth3). Now, I want to set it up as a multi-purpose server. On the one hand, it shall provide a Apache2 webserve, a SQL Server, a File/Streaming Server and so on. I have no problems setting up these.
On the other hand, it should work as a DHCP server in my local lan with some PCs and a printer/scanner. Until now, my cheap router did that job including to connecting me to the internet. Since I can't really set up a proper firewall with that box, I want to use my server for that.
Thats's my desired setup I want to achieve:
[] Router provides internet connection to Server
--> cable goes into eth0
[] Server therefore has a internet connection
--> Some internal magic routes the internet from eth0 to eth1 (preferably as a iptables setup) and does the Firwall & DHCP Service
--> cable goes from eth1 to a switch
--> switch connects the PCs and printer
[] PCs have internet and I can use the printer
So far so good, here's what I've come up with. I installed dnsmasq and isc-dhcp-server. I got some config files for both. I got a script to set up my iptables
Iptables script:
Code: Select all#!/bin/sh
#
# rc.firewall
# firewall with iptables ... stronger version
#
FWVER=0.88s
echo -e "
Loading STRONGER rc.firewall - version $FWVER..
[CODE].....
When starting up the services, I don't see any errors. Still, it doesn't work. My Server loses its internet connection and the PCs connected to the network are unreachable.
Hardware :: Couldn't Find Drivers For Ethernet Cards
May 30, 2010I'm looking for drivers for a some ethernet cards: 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec: 8139] (rev 10) Macronix, Inc. [MXIC] MX987x5 [10d9:0531] (rev 25) and Dlink dfe-538tx
I found some drivers at: Realtek These are for the Realtek card. They are: UnixWare 7.1.x and SCO Unix 5.0.X Which one would I use for Debian Lenny? I couldn't find any for the Macronix I found this site for dlink: ftp://ftp.dlink.com/NIC/dfe538tx/Driver/Linux/
[Code]...
I'm not sure what to do with the dlink. I'm not familiar with Linux drivers. I don't know if this is the right way to go or if there are drivers for linux already.
Networking :: Can Use 2 Ethernet Cards For Green Network In Ipfire?
Jul 5, 2010Ok, so I've gotten tired of my router, and I've decided to make my own using IPFire as the OS. Right now I'm looking for ethernet cards that I can use for the green network, but I don't know if I can use 2 for the same network. I'm trying to get 4 ports at 1000 Mbs, and the only thing I've been able to find so far that's within my price range is a card from startech that has 2 ports, but would I be able to use 2 for the green network?
View 3 Replies View RelatedSoftware :: Unable To Activate Ethernet Cards In Fedora 10?
Oct 31, 2009I have Installed Fedora 10 and I have assigned manual IP address to eth0 and trying to activate the eth0 but all buttons are disabled.
View 2 Replies View RelatedUbuntu Networking :: 9.0.4 - Supported Ethernet Cards That Work Flawlessly?
Apr 29, 2010I'm running Ubuntu 9.0.4 with an Intel PRO/100 VE Network Connection. I have been trying for a couple weeks now different techniques to get my wired ethernet connection working properly. I have a seeming common issue with my e100 driver dropping connection and having hard time picking it back up sometimes. I want to purchase a relatively inexpensive Ethernet card whose generic Linux driver actually operates it CORRECTLY, open up comp and put it in, and update to 9.10. Any list of Ethernet cards that are know to work flawlessly on Ubuntu, or at least tell me which card YOU are using that works perfect without having to write code, install wrapper programs, etc...?
View 8 Replies View RelatedNetworking :: 2 Ethernet Cards Prevent Recognition Of Wireless Card?
Apr 3, 2011I have two motherboards, MSI-6702 (64 bit single channel) and MSI-7511 (64 bit dual channel), I have two identical D-Link wireless cards and am running Kubuntu 10.10 on both systems. 7511 recognizes both wireless cards and connects to the Internet.The 6702 shows wireless grayed out on the connections page. The built-in Ethernet card has given out on both. I think I disabled it on the first system to have an Ethernet problem and wonder if I need to do it on the second. I would have tried it already but can' t remember how.
View 2 Replies View RelatedUbuntu :: Share The Wireless Network With Old Lap Top Via The Wired Ethernet Cards
Mar 25, 2011I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.
View 1 Replies View RelatedFedora Hardware :: Many Ethernet Cards - Find Vendor / Model - MAC Address ?
Oct 7, 2010How can I determine full compliance:
Input data see below.
Code:
Code:
Code:
Result - ethernet devices about which I know the exact information :
Code:
Red Hat / Fedora - Setup Lan And Wan Etho Cards
Apr 22, 2010Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.
etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.
DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?
Ubuntu :: Setup A Corporate Server That Will Bond 5 Pci Lan Cards Into One
Mar 11, 2010The project is to setup a corporate server that will bond 5 pci lan cards into one! The scope is to connect 5 ADSL routers and compine the speeds of all of them.
So i would have 5 routers each 2mbit ADSL would result on a 10mbit connection.
The problem is not only that.
Because this is a corporate network the server MUST also act as a router. This is necessary because people are remotely connecting from e.g. their homes to the network.
if this can be done with a Linux server or it is not feasilbe at all?
Ubuntu :: Multi Monitor Setup With 2 Graphics Cards
May 18, 2011I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies View RelatedDebian Hardware :: GMA 4500MHD - Ability For Dual Head Monitor Setup - Limitation On Virtual Desktop For Older Gma Cards
Jan 30, 2010I want to buy a laptop with gma 4500hd WHAT I WANT IS
1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup
searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards
OpenSUSE Network :: Can't Setup Ethernet Connection
Jul 24, 2010Today I switched from Ubuntu to OpenSuse. But I can't setup my Ethernet connection.I have 2 PCs connected with a crossover cable, one with Ubuntu, the other with OpenSuse 11.3. Lights are on in both NICs.
View 9 Replies View RelatedDebian Configuration :: Ethernet Card And DSL Modem - Internet Setup?
Feb 13, 2010I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
View 5 Replies View RelatedFedora Servers :: OpenVPN Setup On FC12 - Ethernet Ports?
Apr 12, 2010I am trying to setup a VPN on my FC 12 box. Looks like getting openvpn to work behind NAT is as easy as just forwarding the ports. Do I need to forward any specific protocols (GRE, etc)? Also, can I do this with one Ethernet port (IE: RJ-45 jack), or do you recommend a second ethernet port? I could add in another PCI ethernet card if it makes it easier. Anyone know if a single ethernet jack will work or do I need two?
View 2 Replies View RelatedUbuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig
Dec 1, 2010I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies View RelatedDebian Configuration :: Setup Multiple Mac Address Over Single Ethernet Interface?
Jul 23, 2015I want to configure multiple virtual ethernet interfaces over a single physical ethernet interface (eth0) and for each virtual interface the MAC address must be unique and the IP address must be Static.Finally all the virtual interfaces must be able to communicate both internally and externally and the traffic should be captured using wireshark.
I need to have such kind of setup to communicate devices individually using one physical ethernet device.
Because I was fiddling with few kernel modules like MACVLAN and MACVTAP and successfully enabled those modules and rebuild kernel. Using macvlan and macvtap I can configure virtual interfaces with unique mac address and static IPs but while capturing packets using wireshark interfaces behave weirdly.
For example say on HOST machine I have 1 physical interface and created 3 virtual interfaces as shown below.
Interfaces :
eth0 (physical ethernet interface)
IP: 192.168.A.A
MAC: aa:aa:aa:aa:aa:aa
[Code] ....
First from above interfaces I started pinging eth0 internally from host machine in which it worked as usually.
Second I did same externally from other machine which is connected to the same network of Host machine, and this did work as usually.
Third I pinged first virtual interface veth0 both internally and externally and this also works and after that I did check source and destination MAC address using wireshark tool-where both showed up there respective MAC address.
Now triggers the issue, where I pinged second virtual interface same like I did for first one, but this time ping was success and where as in wireshark tool the MAC address for veth0 is picked by veth1. This is where I got stuck and this issue happened for all the remaining virtual interfaces.
I couldn't see any virtual interface showing their respective MAC address, as of the remaining except the first virtual interface has been picking the first veth0 mac address.
Ubuntu Multimedia :: "reset" Sound Cards Setup? (Kubuntu, Phonon, XINE, ALSA)?
Feb 7, 2011Have a couple of very annoying problems. I recently did a re-install of Kubuntu Maverick on my HTPC/fileserver box.It has an onboard (Realtek?) audio card, recognized as... I think, ALC888... Yeah, not sure, KInfoCenter lists a bunch:ALSA Sequencer DeviceUSB 2881 Device ALSA Control Device (my DVB-T stick)ALSA Timer Device
HDA Intel ALSA hardware specific Device
ALC888 Analog ALSA Capture Device
ALC888 Analog ALSA Capture Device
[code]....
Ubuntu :: Having An OSX Snow Leopard Dual Boot Setup - Ethernet Card Does Not Work
Sep 19, 2010I booted ubuntu and the included drivers worked beautifully for my Atheros AR8131 PCI Ethernet card on my laptop. I have an OSX Snow Leopard dual boot setup and my Ethernet card does not work. I was wondering if, because OSX is loosely linux based, the network drivers could somehow be loaded into my Snow Leopard install.
View 1 Replies View RelatedGeneral :: Looking For DVB-T / DVB-S Cards That Compatible With Ubuntu 11.04?
Jul 8, 2011It's 2011....I'm here in the UK...looking to find a DVB TV card that can be made to work with 11.04
Looking for something that is currently available.
Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?
Feb 8, 2011I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
Ubuntu Networking :: User Interface Changed And It Defaulted To Ethernet And Now It Won't Letting To Go Back On Wireless - Disable Ethernet?
Sep 1, 2011My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies View Related
