Networking :: 2 Ethernet Cards Prevent Recognition Of Wireless Card?
Apr 3, 2011
I have two motherboards, MSI-6702 (64 bit single channel) and MSI-7511 (64 bit dual channel), I have two identical D-Link wireless cards and am running Kubuntu 10.10 on both systems. 7511 recognizes both wireless cards and connects to the Internet.The 6702 shows wireless grayed out on the connections page. The built-in Ethernet card has given out on both. I think I disabled it on the first system to have an Ethernet problem and wonder if I need to do it on the second. I would have tried it already but can' t remember how.
View 2 Replies
ADVERTISEMENT
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Sep 23, 2010
I have a Linux box being used as a firewall with Fedora 10 and shorewall 4.2.10. Secondary IPs are loaded on the WAN (eth1)card through Shorewall NAT and Rules file. The problem is that if there is a network hickup or if the circuit bounces, the primary IP comes back but I have to reload Shorewall to get the secondary ips back. Is there a way so that they can automatically reload or just not go away if the connection bounces?
View 4 Replies
View Related
Mar 25, 2011
I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.
View 1 Replies
View Related
Sep 15, 2010
I am writing a new lightweight Linux distibution mainly for educational purposes. I have a problem; it won't find any ethernet cards. I have tried enabling several things in the kernel config. What I would really like to know is how to enable some generic ethernet drivers and therefore networking. I would like to avoid having to use modules. I'm using kernel version 2.6.35.1.
View 9 Replies
View Related
Jul 5, 2010
Ok, so I've gotten tired of my router, and I've decided to make my own using IPFire as the OS. Right now I'm looking for ethernet cards that I can use for the green network, but I don't know if I can use 2 for the same network. I'm trying to get 4 ports at 1000 Mbs, and the only thing I've been able to find so far that's within my price range is a card from startech that has 2 ports, but would I be able to use 2 for the green network?
View 3 Replies
View Related
Apr 29, 2010
I'm running Ubuntu 9.0.4 with an Intel PRO/100 VE Network Connection. I have been trying for a couple weeks now different techniques to get my wired ethernet connection working properly. I have a seeming common issue with my e100 driver dropping connection and having hard time picking it back up sometimes. I want to purchase a relatively inexpensive Ethernet card whose generic Linux driver actually operates it CORRECTLY, open up comp and put it in, and update to 9.10. Any list of Ethernet cards that are know to work flawlessly on Ubuntu, or at least tell me which card YOU are using that works perfect without having to write code, install wrapper programs, etc...?
View 8 Replies
View Related
Mar 27, 2010
Using my usb mobile broadband dongle I am able to access the internet about 25% of the time. I am able to make a connection to the '3' wireless network 100% of the time, but often Mozilla and all other applications that rely on an internet connection do not recognise that this connection has been successfully established, and give me error messages claiming there is no internet connection.
I can't discern any pattern as to whether the connection will be recognised or not. When it isn't recognised, the only solution is to disconnect and reconnect to the network. Sometimes this works and sometimes it doesn't. Sometimes restarting the computer fixes the problem, and sometimes it doesn't. I also have access to a wireless network at uni. I have no problems using this network whatsoever. Housemates using the same dongle on Windows have no problems. I'm using an Acer Aspire one, the dongle is a Huawei e220, I'm running Ubuntu 9.10. I have only recently reinstalled the operating system and have not needed to mess around with any network settings to get the usb dongle to 'work' the way it is currently.
View 1 Replies
View Related
Sep 1, 2011
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies
View Related
Sep 24, 2010
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
View 5 Replies
View Related
Nov 5, 2010
Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
View 3 Replies
View Related
Oct 2, 2010
I installed 10.3 (after buying it a couple of years ago and letting sit on the shelf) and can't get it to configure my ethernet connection or my wireless card. Yast doesn't include a list of available cards, and the error I get in installation-network setup is that the kernel isn't present. The machine I'm installing this on is a Lenovo, in which there isn't a discrete ethernet card (it's in the motherboard), but my wireless card (a Cisco LINKSYS 802.11G) is a discrete card. Because I'm divorcing Microsoft for a number of valid reasons, I don't have Windows available on that box.
View 4 Replies
View Related
Apr 7, 2011
there are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.
View 1 Replies
View Related
Sep 26, 2010
I've got two network card interfaces on my computer, one wireless and one wired. The wireless card is connected to the Internet and the wired is connected to the LAN. When only the wireless card is active, Internet works. As soon as i enable the second wired card, Internet stops working. And it seems like Ubuntu chooses the wired card for Internet as soon as it's enabled.
Are there any ways to solve this? So my Ubuntu box always chooses the wireless card for Internet traffic and let me use the wired device for LAN only?
View 1 Replies
View Related
Apr 19, 2011
Where can I get the answer to my question. No recognition of my memory card in Ubuntu 10.04.
View 1 Replies
View Related
Aug 11, 2010
I'm running 10.04 64 bit, and the Intel PRO/Wireless 5100 AGN does not work with n routers. I'd like to either upgrade the card, or buy a usb adapter, but I can't figure out which cards will work. I've searched[URL].. which lists supported wifi cards, but most of the info on that page is not relevant to lucid, and hasn't been updated at all this year. I saw elsewhere that any card with the atheros chipset will work, but what cards have this? Will all of them with this chipset work?
View 3 Replies
View Related
Jul 6, 2010
I have currently gotten my onboard sound working after some tousling and trial (Intel ICH5), but my beloved Audigy remains without breath. I've been around on the KDE forums thinking that it had to do with Phonon after it permanently forgot my sound cards (a feature which enables permanent sound removal too easily, in my opinion), and the admin pointed me toward my distro's forums.
Here's some info:
[code]...
with some meaningful output, but, after a reboot, still no sound with speakers plugged into the Audigy.
2nd NOTE: I have just found this:
[code]....
The driver in use is NOT the emu10k1 driver, which I believe should be the one according to the alsa soundcard matrix. How do I load the proper driver upon boot?
View 7 Replies
View Related
Apr 24, 2010
can one ethernet card support multiple ip address? but i think it's very dangerous. if bad guy take many ip, other people can't get ip. "does one ethernet card take multiple real ip or multiple virtual ip(one real ip)?" if it takes multiple real ip, then how it works good?..
View 7 Replies
View Related
May 2, 2010
Had a hard drive fail this week, and I am going to order a new one. I am using $150 dollars in Best Buy gift certificates. Well seeing as how I have some left over I would like to get a usb wireless adapter that would work out of the box (preferably usb although I could always get an internal). All Best Buy has are wireless N cards and I was wondering if anyone knows if any Wireless N USB cards work out of the box without downloading firmware or NDISwrapper.
View 3 Replies
View Related
Jun 13, 2010
I recently purchased two MSI Windtop AE2220's. One for my home which uses a router with WPA2 protection and one for my office where I use WEP encryption.
The Realtek internal wireless card will not connect to a WEP router if you are running Ubuntu Lucid Lynx 10.04. I have exhausted all suggestions on this site and all drivers found at Realtek's site.
I have been using Ubuntu since Hardy Heron, but sadly, painfully, I have had to install Windows 7 on my office machine until I find a wireless card compatible with the MSI Windtop AE2220, Lucid and WEP.
View 5 Replies
View Related
Jul 29, 2011
I have a wlan0 which is Atheros AR928X and wlan1 which is Alfa AWUS036H
I thought I could set iwconfig wlan0 txpower [higher than 20] but any value more than 20 results in:
Error for wireless request "Set Tx Power" (8B26) :
SET failed on device wlan0 ; Invalid argument.
I get the same error for wlan1 when trying a value higher than 27.
Is there a way of increasing the TX power and if not then why not?
View 3 Replies
View Related
Mar 9, 2011
i have ubuntu 10.10 64b and for some reason last night the wired network autoeth01 suddenly will not connect to my router. it is a dual boot machine so i booted into windows and it is working fine in that OS.
I then had a look at the status on my laptop running ubuntu 10.10 32b and that was showing the same message "wired network autoeth01 disconnected" i cannot for the life of me figure this out. just before it was disconnected i had been copying 7gigs worth of data using samba from the 32b machine to the 64 bit machine.
i have tried deleting the wired entry and recreating it.
tried different cables
even changed the router
works with all windows machines connected to network
here is what comes up in lfconfig:
jason@ubuntu1:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
[Code].....
View 6 Replies
View Related
Sep 6, 2010
How to setup two Ethernet cards ,one with public ip address and the other with local ip address.
View 4 Replies
View Related
Jun 6, 2010
I'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?
View 6 Replies
View Related
Dec 3, 2010
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies
View Related
Feb 15, 2010
My ISP finished some 'upgrades' on its infrastructure. The result is that I am having great difficulty in connecting to the internet.
I have 3 operating systems on my box - XP, Fedora 8 and Feota 12.
I connect using an ethernet card, using dhcp. In fedora 12, the ethernet card is controlled be networkmanager. After the ISP completed their upgrades, I was not able to connect. I tried to connect manually using
Code:
There was an error message -
Code:
I read the advice here: [url], and removed all but the important lines.
But even after that neither ifup eth0 or dhclient eth0 works.
In fedora 8, the ethernet card is activated by ifup eth0 in /etc/rc.local. I was able to connect on a couple of occasions, but that too stopped working. I tried both ifup eth0, dhclient eth0, and tried to use the gui( which fires the dhclient command), but none worked.
When I use windows, it takes about 2 minutes to get an ip (earlier it was immediate). Sometimes that doesnt work and I have to click on "repair" whereupon it starts working.
View 1 Replies
View Related
Sep 2, 2010
Tell me how to configure my Ethernet card to work. My pc only works wirelessly. I don't know what kind of Ethernet card is installed. I have Ubuntu 10.4 on a dell pc 1ghz, 20ghd, 512mb.
View 2 Replies
View Related
May 19, 2009
i did configure as it was advised on [URL]... but it didn't work. for eg I added eth0:1 and eth0:2 on /etc/sysconfig/network-scripts/ when i do ifconfig i can see only eth0:1, i cannot see eth0:2, eventhough i configured as it was on the tutorial
View 4 Replies
View Related
Nov 9, 2010
I'm having problems getting two wlan cards to work under Networkmanager with F12. I have an old server that I wanted to move, so thought I'd get a USB wlan device for it. before setting up the server, I thought I'd try the USB (an Edimax EW-7711USn - Ralink 2870) on my laptop first. My laptop has an inbuilt ipw2200 card that works fine under NM.
So I've down loaded the DPO_RT3370_LinuxSTA_V2.4.0.1_20100831.tgz file from Ralink, and built the driver (after changing the os/linux/config.mk file for the WPA supplicant settings). I also install the rt2870 firmware (from Ralink) in the /lib/firmware directory. I also blacklisted the rt2800usb driver to ensure that that didn't get loaded.
The problem I have is that I can now get both the ipw2200 device and the rt2870 devices 'working', but they both try to assume the same IP (I want fixed IP's and not DHCP for them) - what is the way to configure the 'devices' so that the rt2870 device is always given IP x and the ipw2200 given IP y?
I think my problem is really my lack of understanding where/how NM handles the files under the GUI config. I used to semi understand how the old network config tool set up it's files and where they were etc. But with NM I'm a bit lost as to how it equates the device with the network settings. Once I have the device working with the correct driver on my laptop, I'll look to apply the same settings on the server (which is then FC13 - but should be simpler as it doesn't have an existing wlan interface).
View 1 Replies
View Related
Nov 30, 2010
I'm new to Ubuntu - I've decided to give Ubuntu Studio a go as an alternative to Windows. However, after installing it, neither of my network cards work. I have a Intel Pro Wireless 3945ABG wireless card, and a Broadcom Netlink Gigabit Wired card. Neither work, And I'm not sure how to. I've tried searching, and have come up with the .tgz file here, but I have no idea what to do with it I'm concentrating on the wireless card for the moment, seeing as that will be the main one I use.
View 4 Replies
View Related
