I booted ubuntu and the included drivers worked beautifully for my Atheros AR8131 PCI Ethernet card on my laptop. I have an OSX Snow Leopard dual boot setup and my Ethernet card does not work. I was wondering if, because OSX is loosely linux based, the network drivers could somehow be loaded into my Snow Leopard install.
View 1 RepliesPerhaps I should have put this in the apple users section, but I am not an apple user. I am using a MSI WIND U100 running OSX snow leopard retail (GUID/GPT - boots using Chameleon).
I've been feeling guilty preaching open source while not currently practising what I preach so finally downloaded ubuntu 10.10 (netbook version) and using unetbootin I made the ISO bootable on an external USB drive.
I already had an empty 40gb partition which I'd intended to dual boot linux on so I went ahead and booted from the external and installed ubuntu. During the install I divided up the 40GB with 3GB for swap and 37GB as ext4 mount point /
Anyway, it installed and rebooted and loaded ubuntu fine using the default option in the auto installed GRUB. However, although the menu show my OSX it does not boot (ARGH!). When selected there is disk activity for a few seconds and then nothing, just blank screen.
I'm praying that I just need to tinker with grub or something to get my OSX back...
(PS> the [URL] forums have loads of info on dual/triple booting these hackintosh netbooks but mostly involving windows XP or windows 7 rather than ubuntu and also mostly about earlier OSX varieties which booted onto MBR partitions rather that GPT.
I did a full install of Ubuntu on my MacBook Pro (7,1) and I am trying to boot into the OS X disc but the screen always pulls up the Apple logo and loading circle and then greys out and tells me to turn the machine off.
I cannot get into disc utility or anything. It almost seems like the computer doesn't know how to handle the disc. I did not use Refit and the only change I made to the boot loader was blessing the ubuntu partition.
I need a realistic MAC OS X Snow Leopard theme. Also a tutorial because i just got ubuntu about a week ago and I have no clue on how to use it. But i need a mac theme.
View 3 Replies View RelatedSaw some tutorials on how to make Ubuntu look like Snow Leopard, however some of the links are broken or do not configure properly.
Has anyone been able to do this with todays version of Ubuntu?
I'm trying to share a some files on a Mac running Snow Leopard with a Ubuntu Linux.
The mount request gets a "permission denied", and a client system log contains "host xx requires a stronger authentication"
I've seen this problem referred to elsewhere, but no solution. This is a hack on a home network, and I really do want to "just do it" and damn the security flaws.
Having wiped all of my HDD and installed ubuntu (on macbook), I now want to install snow leopard again.
I've got a DMG that I made from my install DVD, and want to create a bootable USB to install from (because of no optical drive)..
How do I do that from ubuntu?
There are some fonts in OSX I want to use into Linux. Do I just have to copy them into some directory? How can I transfer fonts from OSX into Linux?
View 1 Replies View RelatedI think I may have hastily installed Ubuntu on sister's Intel iMac. I'm not much of a techie and she'd asked me to make a dual boot system. I burned the ISO file and ran Boot Camp on her iMac and seemingly everything went through properly. However, upon restarting the system, I get a DOS-like page showing the boot options. Switching to 64-bit OS X resulted in a failed boot as did the option for 32-bit OS X. I'm in a bind as she needs to get back into OS X to work on her project.
View 1 Replies View RelatedHey there. Currently my Toshiba laptop is dual-booted with windows 7 and Ubuntu 10.10 and I think I may try and triple-boot it with Snow Leopard. I'm not too familiar at all with hackintoshes so, how should I go about configuring a partition for the OS?
Also: is there any known problems running windows and a mackintosh OS?
If someone can give me some insight here I can also provide my computer's specs.
How do I set up a Linux box on my network so that I can SSH into it and control it using VNC from my Mac mini? I've tried ssh'ing into the Linux box, but it's not recognizing who the user is. How do I find that out so that I can set up ssh & VNC on the Linux box?
View 2 Replies View RelatedI have a comp with Snow Leopard/Windows/Ubuntu 10.4 on it. What I'm trying to do is set permissions to let me copy files from the Snow Leopard partition. I use to be able to. Now I get Permission denied. What do I need to do to set up permissions to the hfs+ journaled partition?
View 1 Replies View RelatedI installed it on a desktop today to try it out. So far I'm loving it and have gotten everything to work except for one thing:
There's a printer connected to it (HP PSC 1600), and I'd like the other computers on the network to be able to print to that computer. The other computers are running Windows 7, and one is running Snow Leopard.
When I plugged in the printer, Ubuntu recognized it almost immediately and installed it. Wonderful! I then went ahead and set it to be Shared, and hoped for the best. Neither the Windows machine or the OS X machine could find the printer...even after I pointed them directly at what I thought was the CUPS address (\mycomputername:631). To make matters even more confusing, I was able to set up shared folders and have the other computers be able to view them.
I have a Laptop with Ubuntu on it, a Desktop with SnowLep and a server running Ubuntu. What I want to do is have the same Desktop (/home/lucian/Desktop) from server mounted on both other machines. I am using a wireless connection and I want to make it mount at startup. I already have the Ubuntu setup, but not at startup the SNowLep is harder and I could not do it yet.
View 1 Replies View RelatedI'm unable to get my Ubuntu 10.04LTS to see my Mac 10.6.4 machine.
I've got Samba and AFP enabled under the Mac file sharing preferences.
Attempt1: From Ubuntu, I can see my Mac under Network>Places, but I'm unable to mount the location.
Attempt2: In Ubuntu, I went to Places>Connect to Server and entered the following:
Service: Windows Share
Server: [name of my mac]
Share: [name of my shared folder]
Folder:
User Name: [username]
Domain Name: WORKGROUP
With this entered, I was able to get as far as being prompted for my password, but was still unable to connect.
Attempt3: I followed the same steps above, but left Domain Name blank. Still nothing.
Are there any docs out there for the correct steps? I can only find posts on getting Mac to see Ubuntu, but not the other way around.
I have ubuntu 10.04, and I want to have all 3 main OS's operating on the same computer.So I have linux as my main system, windows in a virtual machine (virtualbox) and now I have a Mac OS X Snow Leopard CD that I'd like to install onto a 1 TB USB external hard drive...The only problem is that I don't know how to install it to the hard drive, since it plugs in through USB.
View 2 Replies View RelatedI'm looking to try and replace Snow Leopard with Ubuntu 10.04 on my 2007 Macbook.
Looked at a few of the wikis, and there seems to be a couple of issues with workarounds, but nothing major.
Has anyone done this to their Macbooks successfully?
Also, will I need to 'bless' it, as I no longer have an OSX discs
I have install the ubuntu 9.10 on my macbook pro running on snow leopard.
I see lots of errors especially on the usb driver.
And I have download the lastest update and after updating the ubuntu 9.10 the whole computer went in hang mode. i cannot do anything but just to resinstall my snow leopard and reload every thing and then i dare not install ubuntu again and worse there is no way i can boot into mac or ubuntu.
Recently upgraded Ubuntu home server from 8.04 client to 10.04 server and reinstalled all services therein. One of them is a Netatalk daemon that I configured in a fashion similar to this website:[URL]inder recognizes my server and the afp service, yet when I attempt to log in (using valid credentials), Finder indicates its the wrong username and password. I've tried altering some of the config files and my Google-fu to look for solutions
View 1 Replies View RelatedI've tried been trying my hardest and tried researching as much as I can to get Mac OS X Version 10.6.3 in VirtualBox in slackware. I've found a tutorial but it was for previous versions of Snow Leop and it hasn't seemed to help me get mine to run. I get to the part where it should start loading the cd (I purchased a copy of Snow Leopard from Amazon) and the closest I've gotten is to what seems to be a bootup and a loading page of some sort. The screen goes gray with a Mac "busy" mouse icon on the screen.
PS - Running Slack 12.1.0.
PPS - I have the Snow Leopard disc that has "boot camp" on it
I was searching for a long time for a Linux Live USB that I can boot my MacBook Pro from. Is there such a distro I can install on Snow Leopard or Windows 7? Update: I've found this:
"isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...)Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and,I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this and had used open standards instead
I have 2 laptops, one is a Acer travelmate (running xubuntu) and another one is a Dell studio (Running Windows 7). I also have an iMac..2 external hard drive and a BSNL 3G usb data card. I want to setup a network so i can share my files and internet connection between the 3 systems. I don't know what i want to do is possible or not. what i want to do:
1) connect the usb data card to Acer and share the internet connection using the inbuilt wireless card in the laptop so that the dell and imac can access it.
2) connecting the 2 ext. hard drive to Acer and sharing the files over the same connection( wireless connection used to share internet with other systems) so that i can access the files from my dell and imac. I want to mention that i don't have a router.
if yes..how? and if not why? i'm a newbie..so plz help me..earlier also this forum helped me a lot in learning linux..hope this time also i will have some good experiences.
I'm trying to setup a dual boot of windows 7 x64 and Ubuntu 10.10 i386. Before I got windows 7 and the new graphics card it ran 9.10 perfectly. If I take the card out (Nvidia 8800 Ultra), it will install fine but when I put the card back in, it crashes. It appears that it just doesn't like the card.
View 3 Replies View RelatedI had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
i think its XNU "darwin" that the macs use correct? is there even a way to determine which is better? i mean obviously the linux kernel gets updated more often so that would lead me to believe - and the fact they're both based roughly on the same unix architecture.
also, who is it thats doing the linux kernel updating? when we see all the distros getting the linux kernel update to 2.56 or whatever across all of them - whos doing that? is it Linus??
I am once again trying to get a fully functional desktop at work without a dual boot setup. One issue is file searching. I have looked at beagle, tracker and Google Desktop. I am currently testing Google Desktop and it appears to work well, but it is not integrated into nautilus and it appears to not index my email in evolution that is accessed via an exchange server.
Beagle appears dead. Tracker looks promising, but I can't tell if it integrates into Nautilus currently without rebuilding Nautilus. If you use Tracker, can you tell me how it works with Nautilus, mapped cifs drives on windows servers and evolution in exchange mode. Also, the current version of tracker is 0.10.6, but on 10.04 only 0.6.X is available and Natty looks poised to ship with 0.8.X. Is there any advantage to compiling it? Are there Ubuntu specific tweaks that are lost if you go with source?
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedI am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
View 5 Replies View RelatedTell me how to configure my Ethernet card to work. My pc only works wirelessly. I don't know what kind of Ethernet card is installed. I have Ubuntu 10.4 on a dell pc 1ghz, 20ghd, 512mb.
View 2 Replies View RelatedI have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.
I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.
[code]....