Software :: Unable To Activate Ethernet Cards In Fedora 10?
Oct 31, 2009I have Installed Fedora 10 and I have assigned manual IP address to eth0 and trying to activate the eth0 but all buttons are disabled.
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Unable To Activate Ethernet - No MII Interface Found
Mar 12, 2010I have tried the command on ubantu workstation but it giving error : # mii-tools SIOCGMIIPHY on 'eth1' failed: operationsnot support. no MII interface found.
Internet not working. tell me anonymous of kudzu command in fedora.
Fedora Hardware :: Many Ethernet Cards - Find Vendor / Model - MAC Address ?
Oct 7, 2010How can I determine full compliance:
Input data see below.
Code:
Code:
Code:
Result - ethernet devices about which I know the exact information :
Code:
Ubuntu Multimedia :: Activate Graphic Cards Without Monitor?
Jun 16, 2011is there any way to activate the graphic cards without a monitor?It seems in xorg.conf, a "Device" had to be referenced by a "Screen" to have it activated.
I wonder is there any other way to activate a graphic cards without monitor connected to it?
Fedora :: Unable To Activate The Network
Jul 30, 2009Installed Fedora 11 yesterday and was trying to use the Admin->Software Update but initially it complained about no connectivity (this is happening even though I was able to browse the web via FireFox!). So I went to Admin -> Services, and restart the Network Manager. It was then able to download about 250 updates. However, when I clicked on Install after the download, it says it was disconnected. When I went into Admin->Networking, I found out that the eth0 interface is Inactive. However, the Activate button is greyed out. I have been searching in the User Guide, the FAQ, the bugs section and have been unable to find out how to fix this. If I goto the command prompt, and typed in "ifconfig" I can also see that there is no IP and no packets transferred.
View 5 Replies View RelatedUbuntu :: Ethernet Cards Not Connecting?
Mar 9, 2011i have ubuntu 10.10 64b and for some reason last night the wired network autoeth01 suddenly will not connect to my router. it is a dual boot machine so i booted into windows and it is working fine in that OS.
I then had a look at the status on my laptop running ubuntu 10.10 32b and that was showing the same message "wired network autoeth01 disconnected" i cannot for the life of me figure this out. just before it was disconnected i had been copying 7gigs worth of data using samba from the 32b machine to the 64 bit machine.
i have tried deleting the wired entry and recreating it.
tried different cables
even changed the router
works with all windows machines connected to network
here is what comes up in lfconfig:
jason@ubuntu1:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
[Code].....
Networking :: Won't Find Ethernet Cards
Sep 15, 2010I am writing a new lightweight Linux distibution mainly for educational purposes. I have a problem; it won't find any ethernet cards. I have tried enabling several things in the kernel config. What I would really like to know is how to enable some generic ethernet drivers and therefore networking. I would like to avoid having to use modules. I'm using kernel version 2.6.35.1.
View 9 Replies View RelatedGeneral :: How To Setup Two Ethernet Cards
Sep 6, 2010How to setup two Ethernet cards ,one with public ip address and the other with local ip address.
View 4 Replies View RelatedOpenSUSE Install :: 11.2 Not Recognizing Some Ethernet Cards
Jan 5, 2010I've installed OpenSUSE 11.2 on my computer. Well, 11.2 is great and all, but issuing ifconfig yields only loopback device. Now, I have OpenSUSE 11.0 installed on my notebook; the system works fine, although I had that very problem initially and had to recompile the kernel in order to make it recognize my notebook's ethernet card. My question is: If I upgrade my notebook's 11.0 up to 11.2, am I sure to have my files intact? Is 11.2 sure to "see" the ethernet card?
View 2 Replies View RelatedServer :: Configure Two Ethernet Cards With The Same IP For Redundency?
Jul 20, 2010how to configure two Ethernet Cards with the same IP for Redundency and Load Balancing?
I appriciate if you spare some time on replying by above query.
Slackware :: 2 Ethernet Cards Using The Same Driver As Module?
Oct 11, 2009i have 2 nic's that use the same 8139too module to be operated.so in order to run them i added in /etc/modprobe.d/a file with 2 aliases for the 2 nics alias eth0 8139too alias eth1 8139too and I added a udev rule to give the name eth1 to the 2nd card (the 1st card already had a rule) i still don't get the 2nd rule to be brought up automatically at start up... ifconfig only returns 'eth0' and i have to manually do 'ifconfig eth1 up' at which time the interface is brought up nicely.. then i do a dchpcd to get a network address and im all set. but i would like to do this automatically... note that i know that if i add static ips in /etc/rc.d/rc.inet1.conf i will get both ifs up... but i wonder how its gonna happen with the 2nics being 2 dhcp clients.
View 5 Replies View RelatedUbuntu Networking :: Activate Wireless Drivers With No Ethernet Connection?
Sep 26, 2010I'm been wanting to try Ubuntu for a while now, and when my mom's netbook started to get insanely slow with WinXP, I tried the Netbook Remix on a USB stick. I LOVE it, except I am unable to get the wireless working, which is the only thing stopping me right now from a full install.
I believe my problem is that I need to activate the two drivers "Broadcom B43 wireless driver" and "Broadcom STA wireless driver" which appear as unactivated when I go into the hardware drivers admin tools. Unfortunately this netbook (HP Mini Netbook FW376UA) does not have an Ethernet port, so I can't just temporarily hard wire it to activate these drivers.
So my main questions are: 1) How can I activate those drivers without an internet connection?, and 2) Do you think that activating these drivers is indeed the answer to getting the wireless working?
The details:
Machine: HP Mini Netbook FW376UA
Network Controller: Broadcom Corporation BCM4312 802.11b/g
Ubuntu version: Ubuntu 10.04 Netbook
Debian :: Local DHCP Server With Two Ethernet Cards
Jul 5, 2015I recently bought a used Server (FSC RX200 S4) and set it up running Debian 7. Being used to Ubuntu, that was no big deal. It works as it should out of the box. This magic computing machine has four Network cards (eth0 - eth3). Now, I want to set it up as a multi-purpose server. On the one hand, it shall provide a Apache2 webserve, a SQL Server, a File/Streaming Server and so on. I have no problems setting up these.
On the other hand, it should work as a DHCP server in my local lan with some PCs and a printer/scanner. Until now, my cheap router did that job including to connecting me to the internet. Since I can't really set up a proper firewall with that box, I want to use my server for that.
Thats's my desired setup I want to achieve:
[] Router provides internet connection to Server
--> cable goes into eth0
[] Server therefore has a internet connection
--> Some internal magic routes the internet from eth0 to eth1 (preferably as a iptables setup) and does the Firwall & DHCP Service
--> cable goes from eth1 to a switch
--> switch connects the PCs and printer
[] PCs have internet and I can use the printer
So far so good, here's what I've come up with. I installed dnsmasq and isc-dhcp-server. I got some config files for both. I got a script to set up my iptables
Iptables script:
Code: Select all#!/bin/sh
#
# rc.firewall
# firewall with iptables ... stronger version
#
FWVER=0.88s
echo -e "
Loading STRONGER rc.firewall - version $FWVER..
[CODE].....
When starting up the services, I don't see any errors. Still, it doesn't work. My Server loses its internet connection and the PCs connected to the network are unreachable.
Hardware :: Couldn't Find Drivers For Ethernet Cards
May 30, 2010I'm looking for drivers for a some ethernet cards: 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec: 8139] (rev 10) Macronix, Inc. [MXIC] MX987x5 [10d9:0531] (rev 25) and Dlink dfe-538tx
I found some drivers at: Realtek These are for the Realtek card. They are: UnixWare 7.1.x and SCO Unix 5.0.X Which one would I use for Debian Lenny? I couldn't find any for the Macronix I found this site for dlink: ftp://ftp.dlink.com/NIC/dfe538tx/Driver/Linux/
[Code]...
I'm not sure what to do with the dlink. I'm not familiar with Linux drivers. I don't know if this is the right way to go or if there are drivers for linux already.
Networking :: Can Use 2 Ethernet Cards For Green Network In Ipfire?
Jul 5, 2010Ok, so I've gotten tired of my router, and I've decided to make my own using IPFire as the OS. Right now I'm looking for ethernet cards that I can use for the green network, but I don't know if I can use 2 for the same network. I'm trying to get 4 ports at 1000 Mbs, and the only thing I've been able to find so far that's within my price range is a card from startech that has 2 ports, but would I be able to use 2 for the green network?
View 3 Replies View RelatedFedora Networking :: Unable To Activate Eth0 Connection / Resolve This?
Jul 25, 2010Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
Fedora :: Unable To Activate Nvidia-173xx Driver After Upgrading To 14?
Dec 4, 2010I was running Fedora 13 on my old computer with a nvidia Geforce FX 5200 graphics card using the nvidia-173xx driver from fusion. After upgrading to Fedora 14 (the first day of its release) the X server wasn't working anymore, the screen just froze up after the progress bar. With Alt+F4 I "moved" to text mode and gave the startx command, but I got the fatal error message that there was no usable configuration detected. I deleted the xorg.conf file and afterwards I was able to start X again. I use the nouveau driver now, but it doesn't nearly work as good as the nvidia-173xx driver. I have it installed, but when I try to activate it (by running nvidia-xconfig as root) the X server doesn't work again after restart, and I have to do the same thing all over again.
View 6 Replies View RelatedUbuntu Networking :: 9.0.4 - Supported Ethernet Cards That Work Flawlessly?
Apr 29, 2010I'm running Ubuntu 9.0.4 with an Intel PRO/100 VE Network Connection. I have been trying for a couple weeks now different techniques to get my wired ethernet connection working properly. I have a seeming common issue with my e100 driver dropping connection and having hard time picking it back up sometimes. I want to purchase a relatively inexpensive Ethernet card whose generic Linux driver actually operates it CORRECTLY, open up comp and put it in, and update to 9.10. Any list of Ethernet cards that are know to work flawlessly on Ubuntu, or at least tell me which card YOU are using that works perfect without having to write code, install wrapper programs, etc...?
View 8 Replies View RelatedNetworking :: 2 Ethernet Cards Prevent Recognition Of Wireless Card?
Apr 3, 2011I have two motherboards, MSI-6702 (64 bit single channel) and MSI-7511 (64 bit dual channel), I have two identical D-Link wireless cards and am running Kubuntu 10.10 on both systems. 7511 recognizes both wireless cards and connects to the Internet.The 6702 shows wireless grayed out on the connections page. The built-in Ethernet card has given out on both. I think I disabled it on the first system to have an Ethernet problem and wonder if I need to do it on the second. I would have tried it already but can' t remember how.
View 2 Replies View RelatedUbuntu :: Share The Wireless Network With Old Lap Top Via The Wired Ethernet Cards
Mar 25, 2011I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.
View 1 Replies View RelatedFedora Networking :: Unable To Activate Wireless Card In Security Spin
Jul 27, 2010I've been trying to get Security Spin up and running (after having tried unsuccessfully with knoppix STD). I need to be able to connect to my home network, or hell any wireless network.I've tried using iwconfig wlan0 as well as the options in the Network Configuration panel as well as other related panels. I'm able to change and set up profiles for the wireless card, but not to activate them. The button just isn't clickable.If it helps, I'm running Security Spin from a unetbootin usb drive. The wireless card is identified by the system as "Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection" .
View 2 Replies View RelatedGeneral :: Build Broadcom Netlink BCM5787M Onboard Ethernet Cards (x2)
Apr 13, 2010I would like to get my Slackware 11 to work with the Broadcom NetLink BCM5787 onboard Ethernet Cards (x2). I have downloaded the tg3 driver from the Broadcom site. I copied and extracted the driver onto the Linux harddisk. When I wanted to build it I got the message, tg3_compat.h: error : redefinition of 'msecs_to_jiffies'previous delay.h : error: definition 'msecs_to jiffies" was here"
View 3 Replies View RelatedFedora Networking :: Upgraded Etherenet Cards / Unable To Access VPN And Web Host
Oct 5, 2009I'm running a Fedora 10 box behind a Comcast cable modem that provides squid and mail services to 15 XP and Vista workstations. I upgraded the ethernet cards on our Fedora box to support our new 1 gigabyte network. I kept the same device configuration eth0 and eth2 by updating the /etc/udev/net persistent file and changing the ethernet hardware address in the respective ifcfg-eht files in the /etc/sysconfig/network-scripts. The box booted to the new cards, the route and ifgonfig shows the new cards and their hardware addresses, the configuration looks as how the old cards looked (eth0 and eth2 respectfully). I was able to browse the local network and have access to the internet as before from inside the network . However I cannot get access to our web server that serves our web host and our VPN services from ouside our network. I tried stopping the firewall and still could nor connect from outside the network.Could my old ethernet hardware address be hard coded somewherel?
View 1 Replies View RelatedRed Hat / Fedora :: Unable To Install Ethernet Driver For Rhel 5
Sep 16, 2010i have rtl 8111/8168b gbe ethernet card. i hav downloaded its tar file from from gigabyte website.......kernel version is 2.6.18-8.el5
View 1 Replies View RelatedGeneral :: Unable To Activate The Browser
Dec 19, 2010I have been using a little inexpensive Acer, mainly to retrieve e-mail and to browse the web. I normally work on a Mac platform ( I am a designer). A week ago the Acer took a dive from the counter top to the carpet. (not the first time). Since then (coincidence?) the mail function works fine, but the browser does not go on. What should I do?
View 2 Replies View RelatedNetworking :: Unable To Activate Wireless In Kubuntu 11.04
Jul 5, 2011i installed kubuntu 11.04 on my hp-g62 laptop and i'm using a wireless router to connect to the internet.. but i'm unable to use the wireless network. So i would like to know as to how to enable the wireless settings in kubuntu?
View 1 Replies View RelatedUbuntu / Apple :: Unable To Activate The Internal Sub-woofer On A Mac?
Mar 31, 2010Does anyone know how i would be able to activate the internal sub-woofer on a Mac. I have sound, but no bass response. I'm trying to achieve the same sound quality as when I'm in OSX. The iMAC's sound card is built on top of the Realtek ALC885 chipset driven by the Intel ICH8 HD Audio controller.
View 6 Replies View RelatedUbuntu Networking :: Unable To Activate Broadcom STA Driver?
Jan 15, 2011I cant get the STA driver activated. I keep getting the error:
Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.
[code]....
General :: Drivers - Unable To Activate Wireless After Device Has Been Re-enabled
May 8, 2010Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again.
However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook.
Ubuntu Networking :: Unable To Activate Broadcom STA Wireless Driver?
Feb 4, 2010I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....