Hardware :: Setup A 5 Monitors Setup Using 3 Cards?

Oct 8, 2010

I am trying to setup a 5 monitors setup using 3 cards, but I am stuck at 3 monitors for now. The third card is not plugged yet, so the current setup is:

NVIDIA 8800GT (binary driver 195.***)
--->1680x1050 LCD (VGA)
--->1680x1050 LCD (DVI)
ATI HD5450 (3 output, but I think the OSS driver only support 2, corrdct me if I am wrong) (OSS driver)
--->1280x1024 LCD (DVI)
---> 1366x768 TV (VGA)

[Code]...

View 2 Replies


ADVERTISEMENT

Red Hat / Fedora - Setup Lan And Wan Etho Cards

Apr 22, 2010

Wan (mail) is by way of wireless internet into a linksys (PPPoE) 192.168.1.1 router and then only to the mailserver into etho0 192.168.1.3. Mailserver also has etho2 192.168.1.2 connected to a switch that has 3 pc's attached and an adsl router for pc internet access. Server does not provide proxy for pc's. Just mail. Linksys is 192.168.1.1 and can be seen by the isp provider. The server wan is 192.168.1.1 and can ping to 192.168.1.1 and can browse the net via linksys. The lan connection is 192.168.1.2 and this should be visible to the pc's but it doesn't appear to be and can't ping a pc although the switch lights show it is connected.

etho0 192.168.1.3, 255.255.255.0 & default gateway 192.168.1.1
etho2 192.168.1.2, 255.255.255.0 & nothing for default gateway.

DNS is blank for hostname and primary dns is 192.168.1.1. secondary, tertiary and dns search path are all blank. Should there be a default gateway for etho2 even though it only has a lan connection ? If I gave it the adsl gateway then how would the server know which card to use for outside access?

View 6 Replies View Related

General :: How To Setup Two Ethernet Cards

Sep 6, 2010

How to setup two Ethernet cards ,one with public ip address and the other with local ip address.

View 4 Replies View Related

Fedora :: Setup Dual Monitors In F11?

Feb 26, 2010

i have just installed fedora 11. i have two monitors. how to set up dual monitors in fedora 11 ? i tried a lot to search for a way out, however no joy.

View 2 Replies View Related

Ubuntu :: How To Setup Dual Monitors

Mar 23, 2011

The problem is that I don't have NVIDIA graphics card These are my HP ProBook 4510s Laptop's specification: [URL] And I think my built-in graphics card is Mobile Intel´┐Ż 4500MHD Did anyone Dual Monitor with this Laptop or knows how to Dual Monitor with it?

View 3 Replies View Related

Fedora :: Unable To Setup 11 Dual Monitors KDE?

Jun 13, 2009

I have a dual-monitor setup with a 1920x1200 lcd on the left and a 1280x1024 lcd on the right. In Fedora 11 on GNOME, using display settings, I can configure them properly.

KDE, however, is refusing to let me configure them as separate monitors. They are stuck permanently in mirrored mode, and I can't adjust positioning or anything. Here is a screenshot of the desktop with krandr running.

[URL]

View 9 Replies View Related

Fedora Hardware :: Get Dual Monitors Setup?

Feb 6, 2010

I am trying to get dual monitors setup but can not seem to get it working, I would like to have it extend the desktop rather than showing the same thing on both screens.

I have a pci video card with a VGA Monitor Y splitter going to 2 monitors.

View 4 Replies View Related

Ubuntu :: Set Wallpapers On Both Monitors In Dual Setup?

Feb 16, 2011

I have a dual setup and just switched from Xubuntus Xfce? to Fluxbox... But now I can't set wallpapers on both my screens anymore. How do I do that? I had to change the Fluxbox menu from Head 1 to Head 2 to get it on my bigger, primary screen. Which is the one getting a wallpaper when I'm setting one.

Here's my xorg.conf:

Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"

[Code].....

View 1 Replies View Related

Software :: Using Xrandr Or Anything To Setup Multi Monitors?

Oct 20, 2010

i have a laptop and i plunged an external monitor into it. I want to obtain a virtual desktop[ I will privede more debugging info below

video card
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]

Driver:open source radeon driver distribution kubuntu 10.04

I tried this:

xrandr --output LVDS --mode 1280x800 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1280x0

it resulted this error 1

xrandr: screen cannot be larger than 1920x1920 (desired size 3200x1080)

Googling about this error i found a old post,it could be outfated that sugested editing xorg.conf. I created a xorg.conf using "Xorg -configure" and i modified the screen section to this:

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24

[Code].....

View 3 Replies View Related

Ubuntu :: Setup A Corporate Server That Will Bond 5 Pci Lan Cards Into One

Mar 11, 2010

The project is to setup a corporate server that will bond 5 pci lan cards into one! The scope is to connect 5 ADSL routers and compine the speeds of all of them.

So i would have 5 routers each 2mbit ADSL would result on a 10mbit connection.

The problem is not only that.

Because this is a corporate network the server MUST also act as a router. This is necessary because people are remotely connecting from e.g. their homes to the network.

if this can be done with a Linux server or it is not feasilbe at all?

View 5 Replies View Related

Ubuntu :: Multi Monitor Setup With 2 Graphics Cards

May 18, 2011

I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.

View 1 Replies View Related

General :: Switching Between Monitors In Dual-head Setup

Feb 16, 2011

I'm using gnome in a dual-head setup with individual desktops. Is there any way to "jump" to another monitor using the keyboard only? Now the only method I know is to move the mouse pointer to the another screen and click on something there. Can I do something like that without using the mouse?

View 3 Replies View Related

Hardware :: Some NVidia 8400s - Triple Monitors Setup?

Jan 21, 2010

I have been trying my little heart out to get triple monitors setup but I just cant seem to do it. So I have decided that I will quit out on my current video cards and pick up a few new ones and see where this takes me. The cost effective ones seemed to be some 8400s, one would be a PCI-express and one would be on the normal PCI but both are the same GPU. So with this setup would X be able to run all 3 screens with composting so I can run compiz and stuff. And have it one extended x session not 3 separate ones? Specifically I was looking at [URL].

View 3 Replies View Related

General :: Xinerama - 3 Monitors Setup (Slow And Laggy)

Dec 23, 2010

I currently have my monitors set up as an extended desktop using Nividia's Xinerama function. Everything works sweet, except it's acting slow and lags out. It all works out fine when Xinerama is disabled. At the moment, I'm using CentOS with Gnome, but I've tried other distributions with the same outcome. If I can't a fix I'm going back to windblows.

Computer specs:3 monitors
2 Nvidia GTX 275 GFX cards
EVGA 4-way Classified motherboard
12 GB ram
CentOS - with Gnome

View 3 Replies View Related

Ubuntu Installation :: Two Monitors - Dual Video Card Setup?

Jan 9, 2010

I just got another video card from a friend and I wanted to see if I could get it to display a second screen. I have two monitors, both VGA CRT monitors. The first video card is a Geforce 8400gs pci-e and the card given to me is a Geforce FX 5500 pci. I could get them both to work separately under low graphics mode when I go into the bios and switch the video adapter from pci-e to pci, but not together. What to do to make both cards work in harmony?

View 4 Replies View Related

Ubuntu Multimedia :: Setup Dual Monitors With Individual (non-mirrored) Desktops

Dec 17, 2010

I am trying to setup Dual monitors with individual (non-mirrored) desktops. AMDCCCLE will only identify the monitor I want to use as primary as number 2 and the monitor I want to use as secondary as number 1 - I have tasksbars, awm, desktop items configured to use the first screen and the second screen is clear for media use. The choice seems to be determined by what output port on my graphic card.. whatever monitor is attached to the HDMI port is called 1. xrandr can only identify the 2nd monitor - the first monitor is unknown I've attached my xorg.conf

View 9 Replies View Related

Ubuntu Multimedia :: Supported Graphics Card For Dual Monitors Setup

Jan 31, 2011

I'm busy building a machine now and I'm looking to set up dual monitors because it's something I've always fancied but never had the resources to do. I'm basically looking for advice on choosing a graphics card that will support dual monitors with good driver support under Ubuntu. After a few hours of browsing the forums I determined nVidia were the way to go but I'm honestly not bothered if people want to suggest ATI. I'm not a gamer so really only need the card to support dual monitors. I'll also need to know how to set up the card under Ubuntu and then subsequently how to edit xorg.conf in order to get the dual monitors working.

View 6 Replies View Related

Ubuntu Multimedia :: New Install Killed Dual Monitors - Nvidia Setup Not Working ?

Sep 14, 2010

I've just installed 10.04 on an old system.

Hardware is:

- NVIDIA GeForce 6600 GT video card
- Gigabyte EP35C-DS3R motherboard with 3 gig ram, few TB of hard-drive
- dual monitors, both viewsonic vx2235wm, primary on analog, secondary on digital (but whatever, happy to reverse the order)

On the old setup (8.04) the monitors were set up as twinview, 1680x1050 each, no problems. On the new setup (10.04) my old xorg.conf (see below) doesn't work and nvidia xserver settings refuses to detect my second (digital) monitor at any resolution greater than 640x480.

I've tried messing with xorg.conf to no avail and google doesn't appear to be my friend.

Here's the old xorg.conf file that worked in 8.04 but refuses to even boot under 10.04:

Code:

View 1 Replies View Related

Ubuntu Multimedia :: Setup A Wacom Tablet With Multi-Monitors In Maverick And Natty?

Dec 30, 2010

along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries

1) You must have X server 1.8 or up (Maverick has 1.9).

[Code]...

View 9 Replies View Related

Debian Hardware :: GMA 4500MHD - Ability For Dual Head Monitor Setup - Limitation On Virtual Desktop For Older Gma Cards

Jan 30, 2010

I want to buy a laptop with gma 4500hd WHAT I WANT IS

1. 2D AND 3D full support eg compiz, full functional kde4+effects (not to be slow)
2. full hd support
3. oss driver
4. ability for dual head monitor setup

searching in google find out that as fa as it concern the dual head setup there is a limitation on virtual desktop for older gma cards

View 1 Replies View Related

Ubuntu Multimedia :: "reset" Sound Cards Setup? (Kubuntu, Phonon, XINE, ALSA)?

Feb 7, 2011

Have a couple of very annoying problems. I recently did a re-install of Kubuntu Maverick on my HTPC/fileserver box.It has an onboard (Realtek?) audio card, recognized as... I think, ALC888... Yeah, not sure, KInfoCenter lists a bunch:ALSA Sequencer DeviceUSB 2881 Device ALSA Control Device (my DVB-T stick)ALSA Timer Device

HDA Intel ALSA hardware specific Device
ALC888 Analog ALSA Capture Device
ALC888 Analog ALSA Capture Device

[code]....

View 1 Replies View Related

Ubuntu Servers :: Setup New Remote Office - Setup Domain Trust Between Two Sites?

Mar 14, 2010

I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.

View 5 Replies View Related

Software :: Openbravo Installation / Ant Setup And Setup-prerequisites File (don't Remember Exact Name)?

Apr 27, 2011

i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).

Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).

As soon as i issue ant install.source it ends up with some errors..

View 2 Replies View Related

CentOS 5 :: Mistakenly Setup RAID 0 Array On / Instead Of RAID1 During Setup - Convert Without Loss?

Dec 15, 2010

So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...

[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /

[code]....

View 1 Replies View Related

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Debian :: Ubuntu Local Mirror Setup For FAI Server Setup?

Apr 24, 2011

I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.

View 1 Replies View Related

General :: Ubuntu 10.04 - Cannot Setup GRUB On RAID 0 Setup Disks

Jun 4, 2010

I've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.

This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....

View 2 Replies View Related

Ubuntu :: Setup Workflow To A Terminal-based Setup

Jul 8, 2010

Im trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?

Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....

View 9 Replies View Related

CentOS 5 :: Boot Setup From Partition That Is Formatted During Setup

May 5, 2009

Here is a thought experiment:

1. Copy vmlinuz and initrd.img from isolinux subdir into /boot
2. Adjust grub.conf to boot to that kernel
3. Reboot to setup
4. Format /boot (actually '/' ) during "fresh install"
5. Proceed with the installation-over-network

I see two possible outcomes:

1. The setup fails to reformat the drive, because it is "in use" by boot kernel

2. The partition is not "in use" and the installation succeeds

Why? Old cluster with broken CD-drives, lacking USB, and no separate /boot partition.

View 2 Replies View Related

Hardware :: Help Setting Up 3 Monitors On Two Cards

Jul 26, 2009

Edit: FIXED, see 2nd 1/2 for correct config...Id like for someone to look over my xorg.conf and tell me what I'm doing wrong. Just a bit of background I'm using an Matrox G450 Multihead and a Nvidia MX4000 and have three monitors. Id like the G450 multi head to fire on the far left and far right and the nvidia to run in the center. The desktop should be extended across all three.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved